• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.120-122
• /
• 1997

In this paper, the viewing angle characteristics of amorphous (a) - twisted nematic (TN) - liquid crystal display (LCD) on poly(viny)cirmamate (PVC) alignment surfaces were investigated. It was found that the threshold voltage is increased with increasing the polymerization on PVC surfaces. We suggest that the threshold voltage is affected to the surface anchoring strength with increasing the polymerization of the alignment film. Also, we obtained that the viewing angle of a-TN-LCD is increased with increasing the polymerization on PVC surfaces. Finally, we considered that the viewing angle of a-TN-LCD on PVC surfaces is large compared to TN-LCD on rubbed polyimide (Pl) surface.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.731-735
• /
• 2002

Electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure on the poly［4- (fluorocinnamate) phenylmaleimide](PFCPMI) surfaces using a new photodimerization method were investigated. For a new UVLPH (UV linearly polarized during heating) photodimerization method, the photopolymer layers were exposed by linearly polarized UV dichroic polarizer without a specific UV filter during heating at $150^{\circ}C$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN-LCD with UV exposure on the PFCPMI surface for 10 min using the UVLPH photodimerization method was observed. For response time measurement, the transmittance characteristics of the photoaligned TN-LCD using the UVLPH photodimerization method on the photopolymer surface was better than that of the photoaligned TN-LCD using the UVLP photodimerization method under a room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.210-213
• /
• 2004

We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.110-114
• /
• 2014

In this study, we report the doping effect of graphene quantum dots (QDs) in nematic liquid crystal (NLC) system on rubbed polyimide (PI) surface. The good LC alignment and high thermal stability in QD-LC cell system on rubbed PI surfaces can be measured. Also, the low threshold voltage of QD-TN cell was observed about 2.77 V. The fast response time of 13.2 ms for QD-TN cell can be achieved. Finally, the good voltage holding ratio of QD-TN cell on rubbed PI surface was measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.451-452
• /
• 2005

In this study, the threshold voltage and the response time of thermal stressed TN-LCDs showed the same performances on none thermal stressed TN-LCDs. There was little change in TN cells. Also, while increasing thermal stress time, the transmittances of TN-LCDs on the rubbed PI surface were almost the same, But the thermal stability of TN cell was deteriorated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.479-480
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• Environmental Engineering Research
• /
• 제20권1호
• /
• pp.19-24
• /
• 2015

This paper mainly focuses on the research of the monitoring data about the total nitrogen (TN), total phosphorus (TP) of ten monitoring points of Hongze Lake in 28 years. Our study adopts the technical methods such as difference comparison, correlation analysis, Mann-Kendall, etc. to analyze the statistical characteristics, regional differences, and temporal and spatial variation condition of ten monitoring points of Hongze Lake in 1986-2013 as well as the reason for the time and space variation of TN and TP. The results show that the TN and TP of Hongze Lake change dramatically during the period of 1994-2004. In all the monitoring periods, TN and TP of the HZ5, HZ6, HZ7, HZ8 monitoring points in the estuary surrounding the Huaihe River are the highest, which suggests that TN and TP of Hongze Lake should not be ignored for the pollution along the Huaihe River. The TN concentration in the core area is the highest, but that in the development control area is the lowest. In most of the years, TN concentration is higher than 2 mg/L, and the water quality is V class and poor V class water quality in China's Environmental Quality Standards for Surface Water (GB3838-2002). TP concentration of the three areas is basically close, that is lower than 2 mg/L in most of the years, and the water quality is within the V class. The TN and TP concentration of Hongze Lake decreased and intensifying trend of eutrophication is controlled after 2004.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.113-120
• /
• 2007

본 논문은 TN-C-S계통에서 중성선 겸용 보호도체(PEN도체)의 단선고장시 감전의 위험성 및 보호대책에 관한 것으로 PEN도체의 단선고장시 노출도전성 부분의 접촉전압을 줄이기 위하여 전원측 접지저항과 수용가 추가접지 저항에 따른 PEN도체 단선시 노출도전성 부분에 나타나는 접촉전압을 실험적으로 조사하였다. 그 결과 TN-C-S 계통으로 공급되는 설비에 대하여 등전위본딩은 중요한 요건이다. 수용가의 인입구에 추가접지를 하는 것은 PEN 도체의 단선시 노출도전성 부분에 나타나는 접촉전압을 저감시키는 방법 중의 하나이다. 접촉전압을 안전전압 50[V]이하로 제한하는데 필요한 추가접지의 접지저항은 부하용량과 고장회로정수에 의하여 정해진다. 또한 부족전압계전기는 TN-C-S계통에서 PEN도체의 단선고장을 검출할 수 있는 적절한 해결방안이 될 수 있다.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.67-74
• /
• 2010

국내의 저압수용가 대부분은 한국전력공사의 TN-C접지방식으로부터 공급받고 있으나 부하설비는 TT 접지방식을 위주로 한 전기설비기술기준에 따라 시설되어 있다. 본 연구에서는 정보기술설비를 뇌서지로부터 보호할 수 있는 적절한 전원계통접지방식을 제안하기 위해서 TT, TN계통의 뇌서지에 대한 보호성능을 연구하였다. 그 결과, 뇌서지가 배전계통의 중성선에 입사한 때 TT계통의 기기접지단자와 전원선의 중성점 사이에 높은 전위차가 발생하였으며, 예민한 컴퓨터설비가 손상될 위험성이 있으므로 TT계통은 적합하지 않다. 뇌서지로부터 저압 설비를 보호하기 위해서는 등전위본딩이 중요한 요건이며, TN계통이 중성선을 통하여 입사하는 뇌서지의 저감에 가장 우수하였으며, 수용가 인입구에서의 추가접지도 바람직한 방법이다.

• 미생물학회지
• /
• 제26권4호
• /
• pp.305-311
• /
• 1988

Slow growing R. japonicum R-l68 균주로부터 spectinomycin 내성 균주를 선발하고 이 Rhizobium내에 Tn-5를 도입시키기 위하여 Tn5가 함유된 E. coli WA 803/pGS9과의 conjugation을 통한 transposon mutagenesis를 실시하였다. 이때 C conjugation을 통한 Tn5 전이 빈도는 $1.0\times 10^{-5}-5.0\times 10^{-7}$ 범위 이였으며, 얻어진 transconjugant들은 spectinomycin (($100{\mu}$g/ml)과 kanamycin ($50{\mu}$g/ml)을 함유한 yeast extract-mannitol 배지에서 8-10일 배양후 colony를 형성하였다. 또한 transconjugant들은 genome상에 Tn-5를 함유하고 있음을 hybridization-을 통하여 확인하였다. 한편 nodule은 형성 하나 질소고정 활성이 없는 돌연변이주 R. japonicum RMa 75 $nod^{+}fix^{-}$ 균주를 선발하였는데 이 균주는 nodule내에 leghemoglobin이 결핍되어 있음이 확인되었다.