• Title/Summary/Keyword: TMS signal generator

Search Result 24, Processing Time 0.031 seconds

The RF Spectrum Analysis System Realization with DSP Processor (DSP프로세서를 이용한 RF 스펙트럼 분석 시스템 구현)

  • 김자환;류광렬
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.05a
    • /
    • pp.621-624
    • /
    • 2001
  • This paper designs for the real time spectrum analysis on RF signal with DSP processor (TMS320c6$\times$01). The core block has a couple of parts, RF and DSP module. The experiment and performance of system is tested by ESC to generate WCDMA and IS-95C CDMA. The system is enable to analyze the spectrum under lower 5 dB gain to another equipments.

  • PDF

Spectral Shape Invariant Real-time Voice Change System (스펙트럼 형태 불변 실시간 음성 변환 시스템)

  • Kim Weon-Goo
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.15 no.1
    • /
    • pp.48-52
    • /
    • 2005
  • In this paper, the spectral shape invariant real-time voice change method is proposed to change one's voice to mechanical voice. For this purpose, LPC analysis and synthesis is used to maintain the spectraum of voice and the pitch of synthesis speech can be changed freely. In the proposed method, gain matching method is applied to excitation signal generator to make the changed voice natural to hear. In order to evaluate the performance of the proposed method, voice change experiments were conducted. Experimental results showed that original speech signal is changed to the mechanical voice signal in which context of the speaker's voice is conveyed correctly in spite of drastic change of pitch. The system is implemented using TI TMS320C6711DSK board to verify the system runs in real time.

Direct Power Control of PMa-SynRG with Back-to-back PWM Voltage-fed Drive

  • Baek, Jeihoon;Kwak, Sangshin
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.761-768
    • /
    • 2018
  • In this paper, the performance analysis of a control topology based on the direct output power control (DPC) for robust and inexpensive permanent magnet-assisted synchronous reluctance generator (PMa-SynRG) system is presented. The PMa-SynRG might be coupled to an internal combustion engine running at variable speed. A three-phase PWM rectifier rectifies the generator output and supplies the dc link. A single-phase PWM inverter supplies constant ac voltage at constant frequency to the grid. The overall control algorithm is implemented on a TMS320F2812 digital signal processor board. Simulations results and experimental results verify the operation of the proposed system.

Developments of Signal processing Parts of Vehicle Collision Avoidance System using FMCW Radar (FMCW 레이다를 이용한 차량 충돌 방지 시스템의 신호처리부 설계 및 구현)

  • 정진현;오우진
    • Proceedings of the IEEK Conference
    • /
    • 2001.06d
    • /
    • pp.163-166
    • /
    • 2001
  • 본 논문에서는 ITS(Intelligent Transportation System) 기술중의 하나인 차량 충돌 방지 시스템의 신호처리부를 설계 구현하였다. 제안된 시스템은 FMCW (Frequency Modulated Continuous Wave)방식의 770Hz 밀리미터파 레이더를 기준으로 파라미터 값을 설계하여 거리와 속도를 실시간 검출하도록 구현되었다. 제안된 시스템은 TI사의 TMS320C31-40 DSP 와 AT89C52 Bbit 마이크로프로세서로 구현되어 10Hz 이상의 갱신율, 0.2m의 거리 분해능 및 2knvh의 속도 분해능을 제공하고 있다. 실험 환경으로 주파수 발생기(Function Generator)에서 비트주파수(Beat Frequency)를 생성하여 동작을 확인하였다.

  • PDF

Design of a DSP Controller and Driver for the Power-by-wire(PBW) Driving System Using BLDC Servo Motor Pump (BLDC 서보 모터 펌프를 이용하는 직동력(PBW) 구동시스템의 DSP 제어기 및 구동기 설계)

  • Joo, Jae-Hun;Sim, Dong-Seouk;Choi, Jung-Keyng
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.5
    • /
    • pp.1207-1212
    • /
    • 2011
  • This paper presents a study on the DSP(Digital Signal Processor) controller for the PBW(power-by-wire) system using BLDC(Brushless Direct Current) servo motor pump. The PBW hydraulic actuator was realized with hydraulic pump driven by BLDC servo motor, hydraulic cylinder and controller. This PBW system needs speed control of servo motor for linear thrust action of hydraulic cylinder. This paper implements a servo controller with vector control algorithm and MIN-MAX PWM technique. As CPU of a controller, TMS320F2812 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc.

Preceding Instruction Decoding Module(PIDM) for Test Performance Enhancement of JTAG based Systems (JTAG 기반 테스트의 성능향상을 위한 PIDM(Preceding Instruction Decoding Module)

  • 윤연상;김승열;권순열;박진섭;김용대;유영갑
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.8
    • /
    • pp.85-92
    • /
    • 2004
  • A design of a preceding instruction decoding module(PIDM) is proposed aiming at performance enhancement of JTAG-based test complying to the IEEE 1149.1 standard. The PIDM minimizes the number of clocks by performing test access port(TAP) instruction decoding process prior to the execution of TAP-controlled test activities. The scheme allows the generation of signals such as test mode select(TMS) inside of a target system. The design employing PIDM demonstrates 15% performance enhancement with simulation of a CORDIC processor and 48% reduction of the TAP-controller's circuit size with respect to the conventional design of a non-PIDM version.

The Development of a Precision BLDC Servo Position Controller for the Composite Smoke Bomb Rotational Driving System (복합연막탄 선회구동장치를 위한 정밀 BLDC 서보 위치 제어기 개발)

  • Koo, Bon-Min;Park, Moo-Yurl;Choi, Jung-Keyung;Choi, Sung-Jin
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.951-954
    • /
    • 2005
  • This paper presents a study on the accuracy position Controller design for the Composite Smoke Bomb Rotational driving system using a BLDC servo motor. Function of Smoke Bomb is blind in the enermy's sight so that need to high response. The BLDC servo motor controller was designed with DSP(TMS320VC33), IGBT(Insulated Gate Bipolar. Transistor), IGBT gate driver and CPLD(EPM7128). This paper implements those control with vector control and MIN-MAX PWM. Vector control requires information about rotor positions, a resolver should be used to achieve that. The main controller is implemented with a TMS320VC33 high performance floating-point DSP(Digital Signal Process) and PWM Generator is embodied using EPM7128.

  • PDF

Design of a DSP Controller and Driver for the Power-by-wire(PBW) System Using BLDC Servo Motor (BLDC 전동기를 이용하는 직동력(PBW) 구동시스템의 제어기 및 구동기 설계)

  • Joo, Jae-Hun;Goo, Bon-Min;Kim, Jin-Ae;Zo, Dae-Seong;Choi, Jung-Keyng
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.10a
    • /
    • pp.897-900
    • /
    • 2007
  • This paper presents a study on the DSP controller and IGBT inverter driver design for the power-by-wire(PBW) system using BLDC servo motor. This BLDC servo motor system was realized with DSP(Digital Signal Processor) and IGBT inveter module. The PBW system needs speed control of servo motor for linear thrust action. This paper implements a servo controller with vector control and min-max PWM technique. As CPU of controller, TMS320F2812 DSP was adopted because it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI( Serial Peripheral Interface) port and many input/output port etc.

  • PDF

Design of a BLDC Servo Motor Control System for the Auto Process of Assembly and Supply (자동 조립 및 공급을 위한 BLDC 서보 전동기 제어시스템 설계)

  • Sim, Dong-Seok;Choi, Jung-Keyng
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.5
    • /
    • pp.1095-1101
    • /
    • 2012
  • This paper presents a design of a BLDC servo motor control system for the auto process of assembly and supply using DSP(Digital Signal Processor) controller and IGBT driver. The assembly and supply auto processing system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector PWM(Pulse Width Modulation) technique. As CPU of controller, TMS320F240 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc. This control system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downward command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC motor using DSP and IPM. Between host system and sub DSP communicate with RS-422, between main processor and controller communicate with SPI port.

A Development of Hardware-in-the-Loop Simulation System of Automatic Transmission for the Simulation of Shifting Characteristics (자동변속기의 변속특성시뮬레이션을 위한 HILS시스템 개발)

  • 정규홍;이교일
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.9 no.6
    • /
    • pp.143-151
    • /
    • 2001
  • During the past several years, the major interests of car manufacturers in development of automatic transmission were in durability and shift quality. However, a large number of researches for improving shift quality that are based on dynamic characteristics of shifting mechanism have been rarely adopted in the developing process because it is quite difficult to predict the shifting performance from the dynamics simulation. One of the important reasons for the difference between simulation results and experiments arises from the automatic transmission hydraulic system that consists of many valves with high order model and shows a lot different dynamics to temperature variation. In this work, hardware-in-the-loop simulation system for automatic transmission was developed f3r improving the accuracy of simulated result by combining the real-time simulation model with the real hydraulic system. The real-time simulation for automatic transmission model excluding hydraulic system is executed with TI's TMS320C31 DSP and the interfacing board which includes 12bit A/D, PWM signal generator and driver, serial driver ,etc is designed for acquiring the simulation data and signal interface with hydraulic system. We verified the proper operation and correctness of shifting result by comparing the off-line simulation result with that of HILS and experimental result which was performed on transmission dynamometer driven by electric motor.

  • PDF