• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.153-153
• /
• 2013

Turbomolecular pump (TMP) is widely used to obtain and maintain high vacuum by spinning turbine rotors to migrate gas molecules to the exhaust of the pump. However, performance of the TMP has not been well observed when it is influenced by strong magnetic field. Such study may give useful information about magnetic field tolerance of TMP, development of magnetic shielding technique for key components of TMP, etc. For this purpose, magnetic field induced by a circular current source was firstly designed and investigated. Using spherical coordinates and vector potential, magnetic field throughout the space including axis of rotation was calculated. Due to the rotational symmetry of the circular current source, induced magnetic field is azimuthally symmetric and, thus, is analyzed by radial and polar components of the magnetic fields. In order to enhance the numerical accuracy for the calculation, magnetic field was expressed by complete elliptic integrals of first and second kinds. According to the calculation, when 1 A of DC-current passes through a 1 turned circular wire with 50 cm of diameter, overall magnitude of the inducedmagnetic field was about 0.02 Gauss, which was used to the determination of the current and the number of turns of wires to fabricate the coil for the study on the magnetic field tolerance of TMP.

• 폴리머
• /
• 제34권2호
• /
• pp.104-107
• /
• 2010

가교제인 trimethylol propane(TMP)의 함량변화에 따라 다양한 폴리우레탄(PU) 평판을 제작하였다. DMA 측정을 통하여 TMP 함량에 따라서 PU의 $T_g$는 34.8 $^{\circ}C$에서 49.9 $^{\circ}C$로 증가를 확인하였다. TMP의 함량이 4%에서 12%까지 증가함에 따라 탄성률은 322 MPa에서 423 MPa로 증가하였고, 인장강도는 10.6 MPa에서 14.8 MPa로 다소 증가하였으며, 신율은 62.8%에서 49%로 감소하였다. 음향특성의 경우, TMP의 함량이 증가함에 따라 가교 정도가 높아지며, 음속은 증가하였으나 음향감쇠계수는 감소하였다. 제작한 PU 평판은 4주간 수중에서 안정적임을 보여 주었다.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.137-142
• /
• 2015

Trimethoprim-sulfamethoxazole (TMP-SMX) has been used for the treatment of urinary tract infections, but increasing resistance to TMP-SMX has been reported. In this study, we analyzed TMP-SMX resistance genes and their relatedness with integrons and insertion sequence common regions (ISCRs) in uropathogenic gram-negative bacilli. Consecutive nonduplicate TMP-SMX nonsusceptible clinical isolates of E. coli, K. pneumoniae, Acinetobacter spp., and P. aeruginosa were collected from urine. The minimal inhibitory concentration was determined by Etest. TMP-SMX resistance genes (sul and dfr), integrons, and ISCRs were analyzed by PCR and sequencing. A total of 45 E. coli (37.8%), 15 K. pneumoniae (18.5%), 12 Acinetobacter spp. (70.6%), and 9 Pseudomonas aeruginosa (30.0%) isolates were found to be resistant to TMP-SMX. Their MICs were all over 640. In E. coli and K. pneumoniae, sul1 and dfr genes were highly prevalent in relation with integron1. The sul3 gene was detected in E. coli. However, in P. aeruginosa and Acinetobacter spp., only sul1 was prevalent in relation with class 1 integron; however, dfr was not detected and sul2 was less prevalent than in Enterobacteriaceae. ISCR1 and/or ISCR2 were detected in E. coli, K. pneumoniae, and Acinetobacter spp. but the relatedness with TMP-SMX resistance genes was not prominent. ISCR14 was detected in six isolates of E. coli. In conclusion, resistance mechanisms for TMP-SMX were different between Enterobacteriaceae and glucose non-fermenting gram-negative bacilli. Class 1 integron was widely disseminated in uropathogenic gram-negative baciili, so the adoption of prudent use of antimicrobial agents and the establishment of a surveillance system are needed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.373-379
• /
• 2006

Fiber characteristics and fiber distribution of thermomechanical pulp(TMP), bisulfite chemithermomechanical pulp(bisulfite CTMP), neutral sulfite chemithermomechanical pulp(neutral sulfite CTMP) from kenaf(Hibiscus cannabinus L., Malvaceae) cultivar Tainug-2 cultivated in the reclaimed land of Korea were examined to use effectively nonwood fibers as an alternative raw material sources for papermaking. Yields of TMP and CTMP from kenaf were lower than those of TMP from hardwoods and CTMP from softwoods and hardwoods. Bark fibers of kenaf cultivar Tainung-2 ranged 2.04 to 2.30 mm long and $18.7{\sim}19.7{\mu}m$ width. Core fibers averaged 0.63 to 0.80 mm long and $29.5{\sim}31.4{\mu}m$ wide. Coarseness of bark fiber was higher than that of core fiber, and fiber from TMP were higher than those from both bisulfite CTMP and neutral sulfite CTMP. Curl indexes of bark fibers were higher than those of core fibers. However curl indexes were not significantly affected by the pulping conditions. Short fiber distributions were higher in core fibers from TMP and CTMP and long fiber distributions were higher in bark fibers. There was no significant difference in fiber distribution of whole and core fibers obtained from TMP and CTMP, Fibers from neutral sulfite CTMP, however, exhibited a little higher long fiber distribution. Distinct difference in anatomical characteristics was found between core and bast fibers of kenaf plant. Parenchyma cell, pith parenchyma cell and vessel were observed in core fibers and bast fiber in bast sections.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.33-42
• /
• 2015

Pitches contained in thermomechanical pulp negatively influence paper qaulity and pulp and papermaking process. Without controlling TMP pitches suitably, it is hard to make a certain quality of paper. In order to control pitches in TMP, they must be quantitatively recognized by proper tools. One of the most widely used way to detecting TMP pitches is a staining method using a hydrophobic dye such as Sudan IV. Sudan IV could be used with three different protocols including different application of its dissolution, washing, dyeing time, etc. The dyeing protocols were classified into three categories including Stain I, Stain II, and Stain III. In dyeing time, Stain I required more than 24 hours to dye pitches. On the other hand, Stain III could stain TMP pitches with the most brief way. The images of red-stained pitches could be captured by a stereomicroscope with ${\times}35$ and ${\times}45$ magnifications, and then quantitatively analysed measuring their numbers and areas by Carl Zeiss AxioVision (ver. 4.8.2) program. Among three protocols, both Stain I and Stain III were the most ideal methods to detect TMP pitches because they detected more pitches and bigger pitch areas compared to Stain II against the same specimen. In particular, it was recognized that Stain III could be used as the most useful tool to detect TMP pitches accurately within several minutes.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.106.1-106.1
• /
• 2013

When strong static magnetic field is applied to the TMP, it is expected that the presence of the magnetic field might retard the velocity of the blades which results in the change of the pumping speed of the TMP. However, such effect of the magnetic field on the TMP has not been well characterized. Thus, under the strong magnetic field, monitoring pumping speed as well as generated heat, pressure, and vibration of the TMP may be an important issue to understand the magnetic field tolerance of the TMP and the development of magnetic shielding technique for the key components of the pump. For this purpose, magnetic field generation system to the vertical direction by a circular current source was firstly designed and suggested [K. Baik et al., 44th Annual Conf. KVS, 22(1), 153, (2012)]. In the current study, another magnetic field generation systems are presented to apply the magnetic field to the horizontal and radial directions by the rectangular current sources and the permanent magnets respectively. Such systems were made to generate at least 50 Gauss of magnetic field along the vertical direction and at least 25 Gauss of magnetic field along the horizontal or radial direction. Current study introduces the evaluation system of the magnetic field along the vertical, horizontal, and radial directions and presents the measured experimental results of the magnetic field when such systems are combined with the equipment where TMP will be installed.

• Journal of Microbiology and Biotechnology
• /
• 제1권4호
• /
• pp.285-287
• /
• 1991

To produce the tetramethylpyrazine (TMP) flavor compound, Lactococcuss lactis subsp. lactis biovar. diacetilactis (L. diacetilactis) FC1 was cultivated in the TMP medium containing 3% (w/v) of Na-citrate and 6% (w/v) arginine-HC1 as substrates of acetoin and $NH_3$, respectively, which are the two precursors of the TMP. After 19-day fermentation at $34^{\circ}C$, 0.57 g/l or 4.19 mmole/l of the TMP was produced. This was the first result showing that the TMP could be produced by L. diacetilactis.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.173-176
• /
• 2000

This study was carried out to investigate the filtration characteristics of membrane modules according to hollow fiber dispersion for direct solid-liquid separation of activated sludge. 2 bundle, 4 bundle, and 10 bundle, and 10 bundle module used in this experiment according to hollow fiber dispersion was manufactured at laboratory and permeate flux and transmembrane pressure(TMP) of each module were observed under a suction pressure of 0.5kgf/c$m^2$. As the hollow fibers were dispersed, permeate flux was increased and TMP was decreased. Permeate flux and TMP of each module was 15.0 $\ell$/$m^2$.h and 31.8 cmHg for 2 bundle, 16.0 $\ell$/$m^2$ .h and 17.4 cmHg for 4 bundle, and 20.4 $\ell$/m2 .h and 31.8 cmHg for 10 bundle. In conclusion, the membrane fouling is expected to be decrease by maintaining lower TMP with hollow fiber dispersion.

• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.623-631
• /
• 2019

Tetramethylpyrazine (TMP), an alkaloid rich in Ligusticum wallichii and fermented products, possesses multiple pharmacological activities in antioxidant, antiinflammatory, and antibacterial. This study aimed to investigate the effect of TMP (15 mg/L) on the physicochemical and gelation properties of rabbit myofibrillar proteins (MPs) with/without oxidative stress. Results showed that compared to the control, oxidative stress to MPs decreased free thiol content, gel yield, whiteness, water-holding capacity, bounder water, immobilized water, and endogenous tryptophan fluorescence intensity, but increased surface hydrophobicity, dityrosine content, and free water content (p<0.01). Without oxidative stress, MPs treated with TMP increased free thiol content, whiteness, and bound water, but decreased dityrosine content and free water (p<0.05). Under oxidative conditions, all parameters were conversely affected by TMP (p<0.01). The results suggest that TMP can be an antioxidant to decrease the concern on oxidative deterioration during meat processing and storage by improving the oxidative stability, water retention, and gel forming property of rabbit MPs.

• Journal of Pharmaceutical Investigation
• /
• 제22권2호
• /
• pp.105-113
• /
• 1992

To improve the solubility and dissolution rate of trimethoprim (TMP), which is slightly soluble drug, its inclusion complexes were prepared and studied in this experiment. Inclusion complexes of TMP with ${\beta}-cyclodextrin$ and ${\beta}-cyclodextrin$ polymer (CDPS) were prepared according to Fenyvesi method. These were compared with TMP and its physical mixture with CDPS. Water, diluted hydrochloric acid and phosphate buffer solution were used as dissolution media. And accelerated stability test was studied at $50,\;70\;and \;80^{\circ}C$. It was found that solubility and dissolution rate of inclusion complexes were increased in water. Especially, the solubility and dissolution rate of TMP was found to be markedly increased by inclusion complexation with CDPS. In stability test, ${\beta}-cyclodextrin$ inclusion complexes were more or less stable than TMP alone. This tendency was not led in CDPS. Consequently, CDPS was useful in increasing dissolution rate and stability of TMP.