• Journal of Life Science
• /
• v.21 no.10
• /
• pp.1460-1465
• /
• 2011

This study was conducted to determine the effects of total mixed fermentation (TMF) with bean curd dregs on body weight gain, feed intake and body size of growing Hanwoo heifers. Thirty Hanwoo heifers, 6 months of age and weighing $125.9{\pm}12.0$ kg, were randomly allocated to 3 experimental groups of 10 animals each for a 6-month feeding trial. The groups were T1 (rice straw offered ad libitum with restricted (1.7% BW/day) concentrate), T2 (TMF only offered ad libitum) and T3 (TMF and rice straw offered ad libitum with restricted (1.0% BW/day) concentrate). TMF feeds were composed of 60% bean curd dregs, 16.5% corn meal, 10.4% wheat bran, 5% rice straw, 7% rice hulls, 0.5% urea matter, 0.5% magnesia lime and 0.1% lactic acid bacteria. The chemical composition and pH value of TMF feeds were measured at 0, 24, 48 and 72 hr after storage. In TMF with bean curd dregs, there were no differences in concentrations of DM, EE, and CF according to storage periouds. The ADF and NDF at 72 hr of storage time showed a significant decrease (9.52 and 3.15 %, respectively) compared to 0h of storage time (p<0.05). The value of pH was gradually decreased during the storage periods. Body weight gain, feed intake and average daily gain were higher in the TMF groups (T2, T3) compared to the T1 group (p<0.05). Changes in body size were also higher in the TMF groups compared to the T1 group (p<0.05). Thus, the present results indicate that TMF with bean curd dregs may help improve growth performance in growing Hanwoo heifers.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.281-291
• /
• 2019

This study was carried out to investigate the effect of the feeding method of total mixed fermentation (TMF) and concentrate feed on the growth performance, carcass and meat characteristics of late fattening Hanwoo steers. Twenty-four Hanwoo steers were used in this study. The control group was fed with concentrate feed + rice straw from the growing to the late fattening period, while the T1 group was fed with TMF from the growing to the early fattening period and concentrate feed + rice straw for the late fattening period. The T2 group was fed with TMF from the growing to the late fattening period. The average daily gain (ADG) and feed conversion ratio (FCR) were not different between the treatment and control group. Serum cholesterol and high density lipoprotein (HDL) cholesterol concentrations were higher in the T2 groups than in the control group (p<0.05). The yield grade and quality grade were not different between the treatment and control group. The lightness of longissimus muscle was higher in the T1 group than in the control and T2 groups (p<0.05). Poly-unsaturated fatty acid (PUFA) of longissimus muscle was increased in the T2 groups than in the control group. Therefore, the method of feeding TMF and concentrate feed could have a positive effect on the lightness and fatty acid composition of longissimus muscle without affecting the growth and carcass grades of Hanwoo steers.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.97-106
• /
• 2003

One of the obstructing factors against managing dairy fm has been heavy labor requirement for feeding dairy cows. A Power-tiller TMF mixer was developed to reduce the cost and to provide economic benefit. The TMF mixer was desisted by the feeding capacity of 20∼30 heads at a batch with various functioning systems of auger type mixer, delivery conveyer, weighing console, pipe heater type heating system, power transmission train and mounting trailer. According to the study resulted, it showed that 1,200rpm, 1,600rpm, 2,000rpm and 2,300rpm were 6ps. Bps, lops and 12ps respectively. and that reduced shaft output by 15%. On the fodder mixer attached powertiller, initial output was necessary large torque. And the heating system was maintaining uniform temperature 60$^{\circ}C$ relatively.

• Korean Journal of Metals and Materials
• /
• v.49 no.7
• /
• pp.541-548
• /
• 2011

Thermomechanical fatigue (TMF) behavior of heat resistant austenitic stainless steel was evaluated in the temperature range from 100$^{\circ}C$ to peak temperatures of 600 to 800$^{\circ}C$; The fatigue lives under TMF conditions were plotted against the plastic strain range and the dissipated energy per cycle. In the expression of the inelastic strain range versus fatigue life, the TMF data obtained at different temperature ranges were located close to a single line with a small deviation; however, when the dissipated energy per cycle, calculated from the area of the stress-strain hysteresis loops at the half of the fatigue life, was plotted against the fatigue life, the data showed greater scattering than the TMF life against the inelastic strain range. A noticeable stress relaxation in the stress-strain hysteresis curve took place at the peak temperatures higher than 700$^{\circ}C$, but all specimens in this study exhibited cyclic hardening behavior with TMF cycles. Recrystallization occurred during the TMF cycle concurrent with the formation of fine subgrains in the recrystallized region, which is considered to cause the cyclic hardening of the steel.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.112-120
• /
• 2011

The out-of-phase thermo-mechanical fatigue (OP TMF) in a <001> oriented single crystal nickel-based superalloy CMSX-4 has been studied. OP TMF life was less than a half of low cycle fatigue(LCF) life in spite of a small hysteresis loop area of OP TMF compared to that of LCF. The failure was caused by the initiation of a crack at the oxide-layered surface followed by its planar growth along the <100> ${\gamma}$ channel in both LCF and OP TMF. However, deformation twins appeared near the major crack of OP TMF. The multiple groups of parallel twin plates on {111} planes provided a preferential path for crack propagation, which caused a significant decrease in OP TMF life. Additionally, the analysis on the surface crack morphology revealed that the tensile strain at the minimum temperature of OP TMF was found to accelerate the crack propagation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.147-147
• /
• 2012

Cutoff probe has been used for measuring a plasma density using the cutoff peak which is located at the plasma frequency in the low pressure plasma. However, research on analysis of low frequency region of transmission microwave frequency (TMF) spectrum does not performed even though important plasma parameters are located in the low frequency region, i.e., ion plasma frequency and collision frequency. In this research, we analyzed the low frequency region of the TMF spectrum. Experimental results reveal the effect of plasma parameters on the low frequency region on the TMF spectrum. Based on the response of TMF spectrum from changing of plasma parameters, deduction of the plasma parameters was tried. This comprehensive analysis of TMF spectrum expands applicable area of cutoff probe.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.109-113
• /
• 1999

Thermal mass flow meter (TMF) is used measuring the small mass flow rate of gases. Generally, flow rate measuring accuracy of TMF is $\pm2{\%}$ of full scale. TMF is manufactured for specified working pressure and specified working gas by customer. If it were applied for different working pressure and gases, flow rate measurement accuracy decreased dramatically. In this study, a TMF tested with three different gases and pressure range of 0.2 MPa to 1.0 MPa. Effect of specific heat cause to increase flow measurement error as much as ratio of specific heat compare with reference gas. Pressure change cause to increase flowrate measurement deviation about $-0.2{\%}$ as the working pressure decreased 0.1 MPa.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.707-715
• /
• 2009

This paper deals with cyclic stress and strain responses during isothermal low cycle fatigue (LCF) and thermo-mechanical fatigue (TMF) loadings on Nb and Mo containing 15Cr stainless steel, which is used for exhaust manifolds in automobiles. The test temperatures ($T_{i}$) of the isothermal LCF were 600 and $800^{\circ}C$. The minimum temperature of the TMF test was $100^{\circ}C$ and the maximum temperaures ($T_{p}$) were varied between 500 and $800^{\circ}C$. In both loading conditions, weak cyclic softening is observed at $T_{i}=T_{p}=800^{\circ}C$, but the transition to strong cyclic hardening is completed with the temperature decrease below $T_i=600{\sim}700^{\circ}C$ for LCF and $T_{p}=500{\sim}600^{\circ}C$ for TMF. The stress-strain hysteresis loops in the TMF loading show a significant stress relaxation during compressive (heating) half cycle at $T_{p}>500^{\circ}C$, which develops tensile mean stress during cycling. Due to the stress relaxation, the TMF test sample reveals much lower dislocation density than the isothermally fatigued sample at the same temperature with $T_{p}$. A detailed correlation between fatigue microstructure and cycling deformation behavior is discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1383-1388
• /
• 2016

Although image signal processing is used in many fields, degradation takes place in the process of transmitting image data by several causes. CWMF, A-TMF, and AWMF are the typical methods to eliminate noises from image data damaged under salt and pepper noise environment. However, those filters are not effective for noise rejection under highly dense noise environment. In this respect, the present study proposed an algorithm to remove in salt and pepper noise. In case the center pixel is determined to be non-noise, it is replaced with original pixel. In case the center pixel is noise, it segments local mask into 4 directions and uses linear interpolation to estimate original pixel. And then it applies spatial weight to the estimated pixel. The proposed algorithm shows a high PSNR of 24.56[dB] for House images that had been damaged of salt and pepper noise(P = 50%), compared to the existing CWMF, A-TMF and AWMF there were improvements by 16.46[dB], 12.28[dB], and 12.32[dB], respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1687-1693
• /
• 2015

Recently, demand for digital image processing devices increases rapidly, more clear images have been required. But, in the process of digital image acquisition, processing and transmission, image degradation occurs due to various external reasons and researches about noise reduction are on the rise. Therefore, this study suggested the algorithm to process AWGN(additive white Gaussian noise) by separately processing as three levels according to the pixel distribution in the mask in order to remove AWGN(additive white Gaussian noise) which is added in the image. Regarding the processed results by applying Barbara images which were damaged by AWGN(σ = 15), suggested algorithm showed the improvement by 2.87[dB], 2.95[dB], 2.88[dB], 1.52[dB], 1.49[dB], 1.58[dB] and 1.25[dB] respectively compared with the existing MF(5 × 5), A-TMF(5 × 5), AWMF(5 × 5), MF(3 × 3), A-TMF(3 × 3), AWMF(3 × 3), GF(5 × 5).