• Proceedings of the Korean Society of Radiological Science
• /
• 1993.05a
• /
• pp.34.1-34.1
• /
• 1993

• Journal of Periodontal and Implant Science
• /
• v.39 no.3
• /
• pp.349-358
• /
• 2009

Purpose: This study was aimed to evaluate the effect of the Freeze Dried Bone Allograft and Demineralized Bone Matrix on osseous regeneration in the rat calvarial defects. Methods: Eight mm critical-sized calvarial defects were created in the 80 male Sprague-Dawley rats. The animals were divided into 4 groups of 20 animals each. The defects were treated with Freeze Dried Bone Allograft($SureOss^{TM}$), Demineralized Bone Matrix($ExFuse^{TM}$ Gel, $ExFuse^{TM}$ Putty), or were left untreated for sham-surgery control and were evaluated by histologic and histomorphometric parameters following a 2 and 8 week healing intervals. Statistical analysis was done between each groups and time intervals with ANOVA and paired t-test. Results: Defect closure, New bone area, Augmented area in the $SureOss^{TM}$, $ExFuse^{TM}$ Gel, $ExFuse^{TM}$ Putty groups were significantly greater than in the sham-surgery control group at each healing interval(P < 0.05). In the New bone area and Defect closure, there were no significant difference between experimental groups. Augmented area in the $ExFuse^{TM}$ Gel, $ExFuse^{TM}$ Putty groups were significantly greater than $SureOss^{TM}$ group at 2weeks(P < 0.05), however there was no significant difference at 8 weeks. Conclusions: All of $SureOss^{TM}$, $ExFuse^{TM}$ Gel, $ExFuse^{TM}$ Putty groups showed significant new bone formation and augmentation in the calvarial defect model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.553-558
• /
• 1987

A design method of dielectric image-guide grating structures which are applicable for the millimeter-wave system is presented. A dielectric image-guide grating with notches in the sides and also another grating with notches in the top have been designed, fabricated and tested with TM-and TE-mode excitations. From the esperimental results the relatin between TM-TE mode symmetry in the grating structure has been investigated.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.560-568
• /
• 2007

This study was performed to compare the shear bond strength of primary enamel & dentin treated by AQ Bond $Plus^{TM}$ and G $Bond^{TM}$, recently developed 6th generation dentin bonding system, to that of Single $Bond^{TM}$ being widely used. Also by observing the resin tag under scanning electron microscope, Resin tags of each material were also observed under scanning electron microscope and compared to one another. The possibility of clinical application of All-in-One system which has an advantage to reduce chair-time for children with difficult behavior pattern was evaluated. The results obtained are as follows: 1. No statistically significant difference between groups was found in shear bond strength of primary enamel. 2. In primary dentin, the shear bond strength of AQ Bond $Plus^{TM}$ was $1.15\;{\pm}\;0.37\;MPa$, G $Bond^{TM}$ was $1.69\;{\pm}\;0.74\;MPa$ and Single $Bond^{TM}$ was $0.56\;{\pm}\;0.11\;MPa$. There were no statistical difference between AQ Bond $Plus^{TM}$ and G $Bond^{TM}$ and between G $Bond^{TM}$ and Single $Bond^{TM}$, whereas statistically significant difference was found between AQ Bond $Plus^{TM}$ and Single $Bond^{TM}$. 3. Under scanning electron microscope, resin tags observed in AQ Bond $Plus^{TM}$ and G $Bond^{TM}$ were very weak and tangled while strong and thick tags were shown with many lateral branches in Single $Bond^{TM}$. The result of the present study coupled with the advantages of less working time over the previous generation suggests that All-in-One system might be effectively used in adhesive dental procedures for primary teeth.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.542-549
• /
• 2015

This work was carried out to evaluate the effects of preharvest 1-methylcyclopropene (1-MCP, $Harvista^{TM}$) and postharvest 1-MCP ($SmartFresh^{TM}$) treatments on the fruit quality attributes of cold-stored 'Fuji' ( Malus domestica Borkh.) apples. Fruits were exposed to 0, 95, 125, or $250 mg{\cdot}L^{-1}$ $Harvista^{TM}$ at 3, 2, 1 weeks before harvest (WBH), and treated with 0 or $1{\mu}{\cdot}L^{-1}$ $SmartFresh^{TM}$ at harvest. Fruit was then stored for up to 180 days at $0{\pm}1^{\circ}C$. Fruit fresh weight, Hunter's value a, internal ethylene concentration (IEC), flesh firmness, titratable acidity (TA), and soluble solids content (SSC) in fruit treated with $Harvista^{TM}$ were not different from those of control fruit at harvest. During cold storage, flesh firmness and TA were higher in fruit treated with $250mg{\cdot}L^{-1}$ $Harvista^{TM}$ at 2 and 3 WBH than in control fruit. IEC was 5.5-10.0% lower in fruit treated with $250mg{\cdot}L^{-1}$ $Harvista^{TM}$ at 2 and 3 WBH compared with control fruit as storage duration progressed, while SSC was not affected. Furthermore, flesh firmness, TA, and IEC were affected neither by $Harvista^{TM}$ nor $Harvista^{TM}+SmartFresh^{TM}$ treatments, compared with those fruit quality attributes at harvest. The correlation maps indicated that IEC was negatively correlated with firmness and TA, regardless of $Harvista^{TM}$ application levels. In addition, positive correlations between fruit quality attributes were detected in treatments with $250mg{\cdot}L^{-1}$ $Harvista^{TM}+SmartFresh^{TM}$. Therefore, the results suggest that with a single application of $SmartFresh^{TM}$, a higher level of $Harvista^{TM}$ application would help in retention of fruit quality attributes during cold storage.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.387-398
• /
• 2011

$217Plus^{TM}$, a newly developed as a surrogate of the MIL-HDBK-217, may be widely applied for reliability predictions of electronic systems. In this study, we performed sensitivity study of the $217Plus^{TM}$ system model to various parameters. Specific attention was put to logistics model and its behavior has been examined in terms of non-component failure causes. We first briefly explained the $217Plus^{TM}$ methodology with system level failure rate evaluation. We then applied experimental designs with several failure causes as factors. We used an orthogonal array with three levels of each parameter. Our results indicate that cannot duplicate, induced, and wear-out causes have dominant effects on the system failures and design, parts, and system management have much less but a little strong effects. The results in this study not only figure out the behavior of the predicted failure rate as functions of failure causes but provide meaningful guidelines for practical applications.

• Journal of Korean Society for Quality Management
• /
• v.39 no.4
• /
• pp.507-515
• /
• 2011

MIL-HDBK-217 has played a pivotal role in reliability prediction of electronic equipments for more than 30 years. Recently, RIAC developed a new methodology $217Plus^{TM}$which officially replaces MIL-HDBK-217. Sensitivity analysis of the 217Plus component models to various parameters has been performed and meaningful observations have been drawn in this study. We first briefly reviewed the $217Plus^{TM}$ methodolog and compared it with the conventional model, MIL-HDBK-217. We then performed sensitivity analysis $217Plus^{TM}$ component models to various parameters. Based on the six parameters and an orthogonal array selected, we have performed indepth analyses concerning parameter effects on the model. Our result indicates that, among various parameters, operating temperature and temperature rise during operation have the most significant impacts on the life of a component, and thus a design robust to high temperature is the most importantly required. Next, year of manufacture, duty cycle, and voltage stress are weaker but may be significant when they are in heavy load conditions. Although our study is restricted to a specific type of diodes, the results are still valid to other cases. The results in this study not only figure out the behavior of the predicted failure rate as a function of parameters but provide meaningful guidelines for practical applications.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.79-94
• /
• 1986

TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.

• BMB Reports
• /
• v.38 no.6
• /
• pp.676-682
• /
• 2005

To date, no 8-oxoguanine-specific endonuclease-coding gene has been identified in Thermotoga maritima of the order Thermotogales, although its entire genome has been deciphered. However, the hypothetical protein Tm1821 from T. maritima, has a helix-hairpin-helix motif that is considered to be important for DNA binding and catalytic activity. Here, Tm1821 was overexpressed in Escherichia coli and purified using Ni-NTA affinity chromatography, protease digestion, and gel filtration. Tm1821 protein was found to efficiently cleave an oligonucleotide duplex containing 8-oxoguanine, but Tm1821 had little effect on other substrates containing modified bases. Moreover, Tm1821 strongly preferred DNA duplexes containing an 8-oxoguanine:C pair among oligonucleotide duplexes containing 8-oxoguanine paired with four different bases (A, C, G, or T). Furthermore, Tm1821 showed AP lyase activity and Schiff base formation with 8-oxoguanine in the presence of $NaBH_4$, which suggests that it is a bifunctional DNA glycosylase. Tm1821 protein shares unique conserved amino acids and substrate specificity with an 8-oxoguanine DNA glycosylase from the hyperthermophilic archaeon. Thus, the DNA recognition and catalytic mechanisms of Tm1821 protein are likely to be similar to archaeal repair protein, although T. maritima is an eubacterium.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.289-293
• /
• 2000

Diode-laser-pumped Tm:YAG laser of wavelength $2.02\mu\textrm{m}$has been manufactured and its excitation efficiency and output characteristics have been investigated. The excitation efficiency was varied from 66 to 68% with respect to the pump power, yielding pump power absorption of 87-89%. The output power was sensitively varied with the temperature of Tm:YAG rod. When the concave output coupler with a focal length of 25 mm and a transmittance of 3% was used, the maximum output power reached up to 1.2 W. The slope and optical efficiency of this Tm: YAG laser was 29% and 20% at $6^{\circ}C$, respectively.tively.