• Current Research on Agriculture and Life Sciences
• /
• 제30권2호
• /
• pp.82-89
• /
• 2012

시판 다소비 분말수프 3종(감자 수프/PS, 옥수수 수프/CS, 향신료 수프/CHS)에 대한 살균 목적의 감마선 조사(0, 1, 5, 10 kGy)가 이화학적 품질에 미치는 영향을 평가하였다. 아울러 감마선 조사 여부의 판별을 위하여 광자극발광분석(PSL), 전자스핀공명분석(ESR) 및 열발광분석(TL)의 적용가능성을 확인하였다. 시료의 수분함량 및 pH는 조사 여부에 상관없이 비교적 안정적이었으나, 기계적 색도는 조사선량이 증가할수록 PS 시료의 명도(L)는 감소하였고 황색도(b)는 증가하였다. 수프현탁액의 점도는 감마선 조사에 따라 크게 감소하였으며, PS>CS>CHS의 순으로 점도의 감소가 크게 나타났다. 분말수프의 감마선 조사 여부 판별시험에서 1 kGy 이상의 조사시료는 PSL 측정에서 5000 PCs 이상의 값을, ESR 측정에서 crystalline sugar 유래의 multicomponents signal을, 그리고 TL 측정에서 typical TL glow curve를 각각 나타내어 PSL, ESR 및 TL 분석의 적용가능성이 확인되었다.

• 한국식품저장유통학회지
• /
• 제13권1호
• /
• pp.50-54
• /
• 2006

건조 채소류 중 건조 양파 및 마늘에 대하여 감마선 조사(1,4,7kGy)에 따른 검지특성을 photostimulated luminescence(PSL), thermoluminescence(TL) 및 electron spin resonance (ESR)분석에 의해 확인하였다. PSL분석 결과, 건조 양파 시료는 설정된 negative$(\leq1700)$ 및 Positive$(\geq5000)$ 기준에 맞게 비조사군과 조사군의 차이를 쉽게 확인할 수 있었다. 그러나 건조 마늘의 경우 1 및 4 kGy 조사군은 $700\~5000$ 범위의 photon counts (intermediate)를 보였으나 7kGy 조사군에서는 positive한 결과를 나타내었다. 반면, TL 분석 결과에서는 1kGy 이상으로 조사된 두 시료 모두 $150^{\circ}C$ 전후에서 TL glow curve $(TL_1)$를 나타내어 조사 여부의 확인이 가능하였다. 또한 TL ratio $(TL_1/TL_2)$의 측정은 TL 검지결과의 신뢰성을 높여주었다. ESR 분석에서는 두 시료 모두 비 특이적인 signal이 관찰되어 적용이 불가능한 것으로 나타났다.

• 동굴
• /
• 제71호
• /
• pp.5-11
• /
• 2006

A theoretical investigation of the solid phase mechanochemical synthesis of nano sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3 mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano TlCl by dilution of initial (2NaCl+$Tl_2SO_4$) mixture with the exchange reaction product (diluent,$zNa_2SO_4$, z=z*=11.25) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano TlCl obtained experimentally were compared with those for the model reaction KBr+TlCl+zKCl=(z+1) KCl+TlBr (z=z1*=13.5), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• 한국소음진동공학회논문집
• /
• 제25권2호
• /
• pp.116-123
• /
• 2015

This paper proposed a new formula for predicting acoustic power transmission loss of simple expansion chamber with two internal partitions. Seventeen cases of computational results were performed and the database was constructed for the TL according to the various positions of internal partitions. Using this database, firstly, the formula for the peak values of TL at certain frequencies was developed using the least square estimation. Secondly, the formula for the TL curve could be obtained automatically with the input data of the positions of two internal partitions. The formula of TL developed in this paper showed good agreement with computational results. This formula will be helpful for the positioning of internal partitions to improve TL at target frequencies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.405-406
• /
• 2005

A theoretical investigation of the solid-phase mechanochemical synthesis of nano-sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3-mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact-friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano-TlCl by dilution of initial (2NaCl + $Tl_2SO_4$) mixture with the exchange reaction product (diluent, $zNa_2SO_4$, $z=z^*=11.25$) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano-TlCl obtained experimentally were compared with those for the model reaction KBr + TlCl + zKCl = (z + 1) KCl + TlBr ($z=z_l^*=13.5$), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Journal of Radiation Protection and Research
• /
• 제26권1호
• /
• pp.7-12
• /
• 2001

최근 개발된 방사선량 측정용 LiF:Mg,Cu,Na,Si TL 소자의 글로우 곡선, 방출스펙트럼, 광자에 대한 선량의존성, 에너지의존성 및 페이팅 등과 같은 물리적 및 선량계적 특성들을 연구하였다. LiF:Mg,Cu,Na,Si TL 소자는 LiF:Mg,Cu,Na,Si TL 분말에 압력을 가한 후 소결하는 방법으로 제조되었다. 방사선에 대한 특성을 알아보기 위하여 광자선 조사는 한국원자력연구소의 X선 발생 장치 및 $^{137}Cs$ ${\gamma}$선 원격조사장치를 이용하였으며, 사용된 광자선 에너지 범위는 20-662keV, 선량 범위는 $10^{-6}-10^{-2}\;Gy$이었다. 글로우 곡선은 수동형의 TLD 판독장치 (System 310, Teledyne)로 질소를 흘리면서 선형적인 가열률로 측정하였으며, TL 강도는 글로우 곡선을 전체 적분한 면적으로 평가하였다. $5^{\circ}C\;s^{-1}$의 선형적인 가열률로 측정한 글로우 곡선은 5개의 피크들로 분리되었으며, $234^{\circ}C$에 나타나는 주피크의 활성화에너지는 2.34 eV, 진동수인자는 $1.00{\times}10^{23}$이고, 방출스펙트럼은 410nm를 중심으로한 단일한 분포로 나타났다. 선량의존성은 100Gy 이상까지 선형성을 나타내었으며, $^{137}Cs$에 대한 저에너지 광자의 상대적인 에너지 반응값은 20% 범위 이내였다. 또한 실온에서 1년간 보관하였을 때, 시간경과에 따른 TL 감도의 감소가 거의 없는 좋은 페이딩 특성을 보였다.

• The Korean Journal of Ecology
• /
• 제1권1호
• /
• pp.17-23
• /
• 1977

Flowering dates of 389 plant species in the Hongneung Arboretum, Seoul, had been recorded from 1968 through 1975. The thermal analysis on the air temperature as the key factor determining the first flowering date, with climatological data obtained in the Arboretum, were undertaken by Nuttonson's Index (1948) and Lindsey & Newman's Index (1956). The results and conclusion in this study are as follow; Peak in the bell shape distribution curve of the species and first flowering dates, largely, was early May. Flower spans of most species were 10 to 20 days, neverthless, some species flower only a few days while others may stay flowering a hundred days even more. Increase-curves of summation temperature from early spring through late-summer showed almost the same mode in both Nuttonson;s Index (Tn) and Lindsey & Newman's Index (T1). These Indices manifested the exponential curve, increasing slowly at the beginning of spring chiefly but rapidly from the middle part of April. The equation of the linear relationahip between Tn and Tl as far as in thisstudy is as follow. Tl=230Tn It appears that the distribution of summation temperature, below Tn=400°C·day, affects the first flowering, even though it could be modified somehow by the distribution of precipitation, day length and others. Nuttonson's Index (Tn.f) and Lindsey & Newman's Index (Tl.f) upon the thermal amount first flowering dates have been respectively simulated as follow. Tn.f=θa + C Tl.f=230θa + 230C where θ is air temperature 10°C, a and C are a constant.

• Journal of Ginseng Research
• /
• 제37권4호
• /
• pp.483-490
• /
• 2013

Gamma-irradiation (0-7 kGy) of ginseng is permitted in Korea for the purpose of microbial decontamination; with strict labeling, traceability and monitoring requirements. An identification study was conducted to determine the photostimulated-luminescence (PSL) and thermoluminescence (TL) properties of gamma-irradiated fresh and white ginsengs cultivated in different areas. Dose- dependent PSL-based screening was possible for white ginseng samples; however, inappropriate results from non-irradiated fresh ginseng samples were obtained, showing intermediate (700 to 5,000) or positive ($T_2$ >5,000, irradiated) PSL counts due to the abundance of minerals on the surfaces of the samples. TL analysis of separated minerals from all non-irradiated samples gave TL glow curves of low intensity with a maximum peak after $300^{\circ}C$. However, well-defined irradiation-specific (high intensity with a maximum peak at about $200^{\circ}C$) glow curves were observed for all the irradiated samples, regardless of their type and origins. TL ratios (first glow curve /second glow curve) were also determined to confirm the irradiated (>0.1) and non-irradiated (<0.1) results. SEM-EDX (scanning electron microscope-energy dispersive X-ray) and XRD (X-ray diffraction) spectroscopic analyses showed that feldspar and quartz minerals were the main source for the typical radiation-specific luminescence properties.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.494-498
• /
• 2009

The thermoluminescent phosphors of LiYSi$O_4$ containing rare earth metal(La) dopants of 1 wt.%5 wt.% were prepared, and their TL characteristics have been investigated as a function of parameters such as the doping level and the heating rate. The grain size and cooling temperature of the highly sensitive LiYSi$O_4$: La phosphors have been investigated. The glow curve of LiYSi$O_4$: La has two peaks ($P_1,\;P_2$), and the peak height ratio of the two peaks is called $P_2/P_1$; here, the main peak is $P_2$. Experimental results indicate that the peak height ratios of the glow curve for LiYSi$O_4$: La are clearly correlated with the grain size and cooling temperature. The maximum $P_2/P_1$ ratio 3.25, the maximum sensitivity was observed for a grain size between 100-150 ${\mu}m$. The intensity of the TL peak of the phosphors was linearly proportion to the dose of X-rays.