• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.95.2-95.2
• /
• 2010

염료감응형 태양전지의 효율을 향상을 시키기 위하여, 이산화티타니아박막을 doctor-blade 방법으로 FTO 기판위에 15-16um 코팅을 한뒤, 다른 온도의 $400^{\circ}C-600^{\circ}C$ 범위에서, 소결을 하였다. 상대전극은 FTO 기판위에 5Ml의 Pt용액을 가지고, $450^{\circ}C$온도에서 제작을 하였다. 실험의 결과 이산화티타니아의 표면거칠기 및 입자사이즈의 소결의 형상에 따라 DSSC의 효율의 상관관계가 영향을 받았다. 표면의 형상은 AFM으로 측정을 하였으며, 표면의 단차가 RMS의 값이 7nm이하 일 때, 효율의 향상을 이루었다. 실험결과 $500^{\circ}C$ 이하일 때, 상대적으로 낮은 open circuit voltage를 이루었으며, 낮은 Fill-factor를 이루었다. $500^{\circ}C$이상의 온도에서는 상대적으로 높은 high circuit voltage와 높은 fill factor를 나타내었다. 실험결과 $500^{\circ}C$에서 소결된 전극을 가진 DSSC가 단락의 전압과 개방전류가 상호보완된 적정값을 가져 가장 개선된 FF와 Eff를 나타내었다. 이와 같은 특성은 이산화티타니아의 준위 모식도에서 설명이 될수 있고, 이산화티타니아의 최적의 necking 및 pore, 입자크기등이 제어될수 있음을 의미한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1240_1241
• /
• 2009

In this paper, sol-gel-spin coated $Pb(ZrTi)O_3$ thin film with $ZrO_2$ buffer-layer and $PbTiO_3$ seed-layer was investigated for vibration MEMS energy harvester to scavenge power from ambient vibration via d33 piezoelectric mode. Piezoelectric thin film deposition techniques on insulating layer is the important key for $d_{33}$ mode of piezoelectric vibration energy harvester. $ZrO_2$ buff-layer was utilized as an insulating layer. $PbTIO_3$ seed-layer was applied as an inter-layer between PZT and $ZrO_2$ layer to improve the crystalline of PZT thin film. The fabricated PZT thin film had a remanent polarization of 5.3uC/$cm^2$ and the coercive field of 60kV/cm. The fabricated energy harvester using PZT thin film with PTO seed-layer generated 1.1uW of electrical power to $2.2M{\Omega}$ of load with $4.4V_{pvp}$ from vibration of 0.39g at 528Hz.

• Wind and Structures
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2018

This research studies the dynamic analysis of a concrete column reinforced with titanium dioxide ($TiO_2$) nanoparticles under earthquake load. The effect of nanoparticles accumulation in a region of concrete column is examined using Mori-Tanaka model. The structure is simulated mathematically based on the theory of sinusoidal shear deformation theory (SSDT). By calculating strain-displacement and stress-strain relations, the system energies include potential energy, kinetic energy, and external works are derived. Then, using the Hamilton's principle, the governing equations for the structure are extracted. Using these equations, the response of the concrete column under earthquake load is investigated using the numerical methods of differential quadrature (DQ) and Newark. The purpose of this study is to study the effects of percentage of nanoparticles, nanoparticles agglomeration, geometric parameters and boundary conditions on the dynamic response of the structure. The results indicate that by increasing the volume percent of $TiO_2$ nanoparticles, the maximum dynamic deflection of the structure decreases.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.83-86
• /
• 1999

We have fabricated $_2Cu_3O_7$ step-edge junctions with different step orientations and studied their transition properties. Steps with different orientations were prepared on the substrate. Josephson junctions were made on a single substrate with step orientations ranging from 0$^{\circ}$ to 165$^{\circ}$ at 15$^{\circ}$ interval. We measured current-voltage characteristics, the critical current, and the superconducting transition temperature as a function of the angle. The critical current showed a modulation that has a maximum near 0$^{\circ}$ or 90$^{\circ}$ and a minimum near 45$^{\circ}$ and 135$^{\circ}$. We believe that the critical current modulation with the step orientation could be associated with the symmetry of high T$_c$ superconductor.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.409-413
• /
• 1999

Recently, the polymeric insulators have been accepted in several countries for the outdoor high voltage applications. In comparison with the conventional porcelain, polymeric insulators offer various advantages such as light weight, superior vandal resistance and better contamination performance. The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-under the various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on the surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation, high temperature and humidity as well as water spray. These aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. The experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as)$ Al(OH_3$ improves tracking resistance and the $Tio_2$is very effective in preventing degradation of silicone rubber surface from UV-ray.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.852-858
• /
• 2004

An alkoxide-based sol-gel method was used to fabricate $Ba_{0.6}Sr_{0.4}TiO_{3}$thin films doped by Bi from 5 to 20 mol% on a Pt/Ti/$SiO_2$/Sisubstrate. The structural and dielectric properties of BST thin films were investigated as a function of Bi dopant concentration. The dielectric properties of the Bi doped BST films were strongly dependent on the Bi contents. The dielectric constant and dielectric loss of the films decreased with increasing Bi content. However, the leakage current density of the 10 mol% Bi doped $Ba_{0.6}Sr_{0.4}TiO_{3}$ thin film showed the lowest value of 5.13$\times 10^{-7} A/{cm}^2$ at 5 V. The figure of merit (FOM) reached a maximum value of 32.42 at a 10 mol% Bi doped $Ba_{0.6}Sr_{0.4}TiO_{3}$thin films. The dielectric constant, loss factor, and tunability of the 10 mol% Bi doped $Ba_{0.6}Sr_{0.4}Tio_{3}$ thin films were 333, 0.0095, and 31.1%, respectively.

• Journal of Environmental Science International
• /
• v.15 no.9
• /
• pp.855-864
• /
• 2006

This study introduces a method to eliminate formaldehyde and benzene, toluene from indoor air by means of a photocatalytic oxidation reaction. In the method introduced, for the good performance of the reaction, the effect and interactions of the $TiO_2$ catalyst and ultraviolet in photocatalytic degradation on the reaction area, dosages of catalysts, humidity and light should be precisely examined and controled. Experiments has been carried out under various intensities of UV light and initial concentrations of formaldehyde, benzene and toluene to investigate the removal efficiency of the pollutants. Reactors in the experiments consist of an annular type Pyrex glass flow reactor and an 11W germicidal lamp. Results of the experiments showed reduction of formaldehyde, benzene and toluene in ultraviolet $/TiO_2/$ activated carbon processes (photooxidation-photocatalytic oxidation-adsorption processes), from 98% to 90%, from 98% to 93% and from 99% to 97% respectively. Form the results we can get a conclusion that a ultraviolet/Tio2/activated carbon system used in the method introduced is a powerful one for th treatment of formaldehyde, benzene and toluene of indoor spaces.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.900-904
• /
• 1999

The effects of Tio$_2$addition on the microstructural evolution and mechanical properties of alumina ceramics were studied. Bulk density decreased with an increase of the amount of TiO$_2$. Apparent porosity decreased with an increase of the amount of TiO$_2$ up to 7wt%. But beyond 9wt% of TiO$_2$powders, apparent porosity increased. In the compression test, the modulus increased with an increase of the amount of TiO$_2$addition. In the three point bending test, the stress at yield decreased with an increase of the amount of TiO$_2$ addition. The addition. The addition of TiO$_2$ promoted the grain growth of alumina ceramics.

• Journal of the Korean Ceramic Society
• /
• v.45 no.6
• /
• pp.324-330
• /
• 2008

Activated carbon/$TiO_2$ (AC/$TiO_2$) composites modified with different concentrations of Fe were prepared. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine activated carbon. This indicated the blocking of the micropores on the surface of AC, which was further supported by observation via SEM. XRD results showed patterns for the composites and an anatase typed titanium dioxide structure with a small part of rutile in a higher Fe concentration (> 1.0 mol/L). EDX results showed the presence of C and, O, with Ti peaks on the composites of Fe-AC/$TiO_2$ with relatively lower Ti concentration, which may be due to the higher Fe concentration incorporated into the composites. Subsequently, the photocatalytic effects on methylene blue (MB) were investigated. The improved decomposition of MB showed the combined effects of adsorptions and photodegradation. Especially, the composites modified by Fe revealed enhanced photodegradation behaviors of MB.

• International Journal of Ocean System Engineering
• /
• v.3 no.2
• /
• pp.102-110
• /
• 2013

The purpose of this study was to improve the properties of epoxy resin using titanium oxide nanoparticles. The effects of particle weight fraction, dispersion agent, and curing agents with different molecular weights on the thermal and mechanical properties of titanium-oxide-reinforced epoxy resin were investigated. In addition, the effect of the particle dispersion condition on the mechanical properties of nanocomposites was studied. As a result, it was found that the glass transition temperature of film-shaped nanocomposites decreased with an in-crease in the nanoparticle content. Because nanoparticles interrupted the cross linkage between the epoxy resin and the amine curing agent, the cross-link density of the epoxy became lower and led to a decrease in $T_g$ in the nanocompo-sites. The tensile strength and modulus in film-shaped nanocomposites also increased with the particles content. But in the case of dog-bone-shaped nanocomposites, the values were not similar to the trend for the film-shaped nanocompo-sites. This was probably a result of the different nanoparticles dispersions in the epoxy resins resulting from the respective-thicknesses of the film and dog-bone-shaped samples.