• 대한전자공학회논문지SD
• /
• 제45권10호
• /
• pp.31-38
• /
• 2008

본 논문은 유선으로 연결된 다양한 센서들의 제어와 센서들 간의 호환성을 보장하는 IEEE 1451.2 표준을 적용한 센서 네트워크 시스템 구현에 대한 연구이다. 제안된 시스템은 IEEE 1451.0에서 기술된 네트워크 수용 가능한 응용 프로세서(NCAP-Network Capable Application Processor)와 IEEE 1451.2에서 기술된 변환기 독립 인터페이스(TII-Transducer Independent Interface), 변환기 전자 데이터 시트(TEDS-Transducer Electronic Data Sheet)와 아날로그 디지털 변환기를 포함한 송수신기 부분으로 구성된다. 본 시스템은 추후 반도체 집적회로 설계에 용이할 수 있돌고 시스템의 소형화와 최적화를 목표로 구현되었다. 네트워크 수용 가능한 응용 프로세서는 개인용 컴퓨터상에서 C언어로 구현하였고 변환기 독립 인터페이스는 개인용 컴퓨터의 병렬포트와 FPGA(Field-Programmable Gate Array) 응용보드의 확장포트를 이용하였고, 송수신기는 FPGA 응용보드를 이용하여 Verilog로 구현하였다. 표준에 근거한 실험을 수행하여 제안된 구조의 검증을 수행하였다.

• 제어로봇시스템학회논문지
• /
• 제15권7호
• /
• pp.753-759
• /
• 2009

As many systems depend on electronics in an intelligent vehicle, concern for fault tolerance is growing rapidly. For example, a car with its braking controlled by electronics and no mechanical linkage from brake pedal to calipers of front tires(brake-by-wire system) should be fault tolerant because a failure can come without any warning and its effect is devastating. In general, fault tolerance is usually designed by placing redundant components that duplicate the functions of the original module. In this way a fault can be isolated, and safe operation is guaranteed by replacing the faulty module with its redundant and normal module within a predefined interval. In order to make in-vehicle network fault tolerant, this paper presents the concept and design methodology of an IEEE 1451 based dual CAN module. In addition, feasibility of the dual CAN network was evaluated by implementing the dual CAN module.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.176-184
• /
• 2011

As modern megalopolises become more complex and huge, convenience and safety of citizens are main components for a welfare state. In order to make safe society, telemetrics technology, which remotely measures the information of target system using electronic devices, is an essential component. In general, telemetrics technology consists of USN (ubiquitous sensor network) based on a wireless network, smart sensor, and SoC (system on chip). In the smart sensor technology, the following two problems should be overcome. Firstly, because it is very difficult for transducer manufacturers to develop smart sensors that support all the existing network protocols, the smart sensor must be independent of the type of networking protocols. Secondly, smart sensors should be modular so that a faulty sensor element can be replaced without replacing healthy communication element. To solve these problems, this paper investigates the feasibility of an IEEE 1451 based ZigBee smart sensor system. More specifically, a smart sensor for large network coverage has been developed using ZigBee for active telemetrics.