• Information and Communications Magazine
• /
• v.33 no.2
• /
• pp.3-9
• /
• 2016

본 고에서는 고신뢰 사물지능 생태계 창출을 위한 TII S/W 프레임워크를 소개한다. TII 기술은 사람, 사물, 서비스에 대한 신뢰 정보를 용이하게 수집하고, 신뢰 모델링을 통해 물리적, 사이버, 소셜 영역의 사람/사물에 대한 신뢰 데이터 구조화와 복합 신뢰 분석을 수행하며, TSB(Trust Service Broker)의 중재를 통해 상세 개인/사물 정보 제공없이 신뢰 기반 서비스를 이용/제공하는 것을 특징으로 한다. 전체론적 신뢰 관리를 위해 TII 시스템에 신뢰 네트워크를 고려한 구조를 제시한다.

• Electronics and Telecommunications Trends
• /
• v.32 no.1
• /
• pp.61-71
• /
• 2017

최근 ICT 기술 및 생태 환경은 매우 빠르게 변화하고 있으며, 이러한 변화 속에서 가장 주목받고 있는 변화는 초연결 사회를 지향하면서 IoT를 활용한 서비스가 다양한 산업 분야에서 매우 빠르게 변화하고 있는 것이다. 그러나, IoT 환경에서 주고받는 데이터 및 정보가 신뢰받지 못한다면 IoT 서비스는 IoT 서비스 확산에 주요 걸림돌이 되어, ICT 융합 산업의 생태계 조성과 성장 및 신 산업 발굴에 커다란 장애물로 나타나게 될 가능성이 많을 것으로 예상된다. 이러한 위험성으로 인하여, ICT 서비스 산업의 신뢰 기반 인프라 조성은 IoT 기반의 다양한 공유 경제 서비스 실현 및 에너지, 교통, 의료 등 타 산업과의 ICT 융합 실현을 위한 필수 선행 조건으로 대두되고 있고, 이를 뒷받침하는 인프라 기술인 TII(Trusted Information Infrastructure) 기술 개발의 중요성이 증대되고 있다. 본고에서는 ICT 트러스트 정보 인프라(TII) 기술에 대한 국내외 기술 동향과 더불어, ETRI에서 개발하고 있는 TII 기술 및 이를 이용한 응용 서비스 사례, 그리고 표준화 동향 등에 대해 살펴본다.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.453-459
• /
• 2019

In this study, the influence factors on the stability of the O/W (oil in water) emulsions prepared with coconut oil and the nonionic mixed surfactant (Tween 80-Span 80) were evaluated. The concentration and HLB value of the nonionic mixed surfactant, and the degree of agitation were used as manufacture factors. The stability of prepared O/W emulsions were measured with the mean droplet size, zeta-potential, emulsion stability index (ESI), and thermal instability index (TII). The mean droplet size of the prepared O/W emulsions was from 100 to 200 nm. As the concentration of mixed surfactant and the homogenization speed increased, the droplet sizes decreased, while the zeta-potential values increased. The effect of HLB values increased in the order of 6.0, 10.0 and 8.0, and at the HLB value of 8 the smallest mean droplet size as 120 nm was obtained whereas the largest value of the zeta-potential between 10 and 60 mV. From the results of ESI and TII, the stability of prepared O/W emulsions increased in order of 6.0, 10.0 and 8.0 of HLB values, and ESI and TII values were above 80% and below 20% respectively at HLB value of 8.0.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.796-806
• /
• 2009

This paper presents the method of emergency warning system operation based on T-DMB and the design of T-DMB AEAS receiver model. The proposed receiver model compares the geographical location of emergency with the location of DMB transmitting station from T-DMB broadcasting signal and classifies the receiver location into alert region, neighboring region and non-alert region and transmits the emergency alert message according to each region. The geographical location of emergency can be obtained from FIG 5/2 EWS data field for AEAS message and the location of DMB transmitting station can be estimated from either the latitude and the longitude in main identifier and sub identifier in FIG 0/22 data filed for TII(Transmitter Identification Information) or TII distribution database. In our experiment, we implemented the proposed receiver model with display section, storage section, DMB module for receiving broadcasting signal and control section and performed test emergency alert broadcasting using T-DMB signal generator.

• Journal of Distribution Science
• /
• v.21 no.9
• /
• pp.67-79
• /
• 2023

Purpose: To investigate the intensity of bilateral international trade of the Silk Road Economic Belt (SREB) countries with Kazakhstan, its relationship with logistics (LPI), to assess their contribution to economic growth and distribution of commodity flows. Research design, data, and methodology: The method of analyzing the bilateral trade flow was applied by using the trade intensity index (TII) and a multidimensional regression model describing the relationship between LPI and its components, TII, the volume of exports and imports, GDP. Results: The nature and directions of the relationship between TII and the key components of logistics, the positive impact of LPI on the intensity of trade are established. It is revealed that the intensity of trade between the countries in the direction of the EAEU-Kazakhstan has a greater impact on the growth of LPI than in the opposite direction. At the same time, the higher the level of trade integration and the volume of GDP, the stronger their impact on the efficiency of logistics and distribution of commodity flows. Conclusions: Effective distribution of commodity flows will require the development of logistics components based on the direction of bilateral trade and the size of countries, the intensification of state reforms in the field of international trade and distribution logistics.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.615-623
• /
• 2012

This paper presents T-DMB AEAS (automatic emergency alerting service) receiver model considering emergency region. The proposed receiver model determines the geographical location of the terminal by analysing the received T-DMB signal and displays the AEAS messages only if the location of terminal is similar to the emergency site. First, to determine the geographical location of the terminal, we extract the TII value from the null symbol of the SC and, based on it, calculate the location of transmitter by analysing FIG 0/22 delivering the TII-related data. The proposed algorithm sets the location of transmitter as that of receiver and displays the emergency message only in the case of the similar region. The experiment was conducted in the test environment of low power T-DMB generator based on the T-DMB AEAS messages.

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.520-531
• /
• 2017

The purpose of this study was to test the validity and reliability of the Korean version of the Tuberculosis Interview Instrument (K-TII). The instrument was first translated into Korean, back-translated to English, and reviewed. After the translation process, the instrument was revised from 52 items to 37 items by researchers and an expert according to the systematic review. In addition, these items were reduced to 32 items after the content validity test was done by 9 experts. As a result of pilot study conducted in 20 early childhood teachers, 32 items were selected for the preliminary instrument. Data collected from 289 early childhood teachers were used to test the validity and reliability of the preliminary instrument. The result of factor analysis showed that the instrument categorized into 7 factors explaining 71% of the total variance and 27 items were retained for the final instrument. The result of Cronbach's ${\alpha}$ coefficient was .88. In conclusion, the K-TII may be a suitable instrument for assessing tuberculosis prevention behaviors in early childhood teachers in Korea.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.308-313
• /
• 2011

The ring-opening isomerization polymerization behavior of 2,5,6,7-tetrahydro-3H-imidazo[2,1-b] [1,3] oxazine(TII) has been studied under various conditions. The present study aimed at improving the low polymerizability of the above monomer (six-membered ring) up to a level comparable to that of 2,5,6-tetrahydroimidazo[2,1-b] [l,3] oxazole(TIO) (five-membered ring). The optimum result could be observed when methyl trifluoromethanesulfonate(MeOTf) and nitrobenzene were used as an initiator and a solvent in the polymerization at $60^{\circ}C$ for 24 h. Polymers were confirmed by$^1H$ NMR과$^{13}C$ NMR, and m measurements. The molecular weight obtained by gel permeation chromatography (GPC) corresponded to the molecular weight theoretically calculated from the feed ratio. The melting temperature ($T_m$) of TII was conspicuously different from that of TIO, because of the difference in the alkyl group.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2020

In this study, the O/W emulsions prepared from coconut oil and the non-ionic mixed surfactant as Tween-Span system were evaluated and optimized in order to upgrade the stability of manufactured emulsions. For the optimization, a central composite design model-response surface methodology, so called as CCD-RSM was implemented. Quantitative factors were the hydrophile-lipophilie balance (HLB), amount of non-ionic mixed surfactant and emulsification speed while experimental results included the mean droplet size (MDS), emulsion stability index (ESI), and thermal instability index (TII). Optimized values of the HLB, amount of non-ionic mixed surfactant and emulsification speed obtained from CCD-RSM were 9.1, 8.7 wt.%, and 6,200.8 rpm, respectively. Expected experimental results for MDS, ESI, and TII under the optimized experimental condition were 151.0 nm, 99.86, and 3.17%, respectively. The average error from actual experiments which established for validation of the conclusions was lower than 3.5%. Therefore, a highly favorable level could be obtained when the optimized CCD-RSM was applied to manufacturing the O/W emulsion in this study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.31-38
• /
• 2008

This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.