• The Journal of Pediatrics of Korean Medicine
• /
• v.20 no.2
• /
• pp.129-137
• /
• 2006

목적 : 본 연구를 통하여 아토피 피부염 환아의 한약치료 후 임상 효능, 안전성을 평가하고, 나아가 효능과 안전성을 종합적으로 평가함으로써 아토피 피부염에 대한 한약치료의 유용성을 평가하고자 한다. 방법 : 경희대학교 한의과대학 부속한방병원 한방소아과에 내원한 아토피 피부염 환아 39명의 한약치료 전후의 의무기록을 검토하였다. 아토피피부염 치료에 대한 한약의 효능을 평가하기 위하여 치료 후 아토피 피부염의 개선정도에 대한 부모의 평가를 VAS를 사용하여 분석하였다. 아토피 피부염에 패한 한약치료 후 안정성의 평가를 위하여 치료 전후 혈중 AST, ALT, BUN, creatinine 변화를 검토하여 한약치료의 간신독성 여부에 대해 조사하였고, 보호자에 대한 설문조사를 통하여 한약치료 후 발생한 부작용 및 불편한 증상의 종류 및 정도를 평가하였다. 나아가 한약의 효능 및 안정성을 종합적으로 평가하여 아토피 피부염에 대한 한약 치료의 유용성을 분석하였다. 결과 및 결론 : 환아 39명 중 27명 (69%)의 부모가 한약치료가 아토피 피부염의 개선에 효과가 있다고 보고하였다. 안정성의 평가에 있어서, 39명의 환자에게서 한약 치료 후 간장과 신장에 미치는 독성이 발견되지 않았다. 2명의 환아가 일시적이고 경미한 복부 불쾌감을 호소하였으나, 한약투여와의 관련성은 관찰되지 않았다. 1명의 환아에서 경미한 복통이 발견되었으나, 의학적 치료 없이 증상은 소실되었으며, 치료 과정의 중단 없이 계획되었던 모든 치료 과정을 종료하였다. 치료 후 상기 환아는 아토피 피부염의 증상 개선 뿐 아니라 변비증상의 완화, 만성적 어지러움의 개선 등 제반 신체 조건의 호전을 보고 하였다. 임상적 효능과 안전성을 종합적으로 고려할 때, 환아 39명 중 27명 (69%)의 사례에서 한약치료가 아토피 피부염의 유용한 치료수단으로 평가되었다. 이를 근거로 한약치료가 아토피 피부염에 대하여 안전성을 가진 유용한 치료방법이라 사료되며, 향후 임상적 효능과 안전성을 객관적으로 평가할 수 있는 대규모의 임상연구가 필요하리라 사료된다.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1996.12a
• /
• pp.75-75
• /
• 1996

최근 가장 관심이 집중되고 있는 음용수중의 미량오염물질로는 인위적으로 첨가되는 소독제(disi octant)로 인한 소독부산물(disinfection by-products: DBPs)을 들 수 있다. 1970년대부터 염소소독시 수중의 유기오염물길과 반응하여 발암성물질 과 돌연변이 물질이 다수 함유되어 있는 클로로포름(chloform)을 포함한 트리할로메탄(Trih리omethane: THMs)의 생성이 발견되었으며 이로 인한 건강상의 영향이 지속적으로 보고되고 있다. 염소소독시 780가지 이상의 화합물이 염소와 휴믹산(humic acids)과의 반응에 의해 생성되며, 이중 대부분이 할로겐 화합물로 알려져 있다. 염소 소독부산물로는 인체발암력을 지니고 있는 트리할로메탄(THMs) 이외에도 할로아세틱산(Haloaceticacids: HAAs), 할로아세토나이트릴(Haloacetbnitriles: HANs)등이 주 생성물질인 것으로 알려져 있으나 우러나라의 원수특성에 따른 소독부산물의 생성능 (Formation potential)에 대한 연구가 미흡한 실정이다. 본 연구에서는 우리나라 주요 4대강(한강, 대청호, 영산강, 낙동강)의 원수를 실험실내에서 염소처리하여 생성되는 소독부산물의 생성농과 pH, 체류시간 등의 조건에 따라 생성능을 조사하였다. 각 화합물은 추출 및 농축과정을 거친 후 GC/MSD를 사용하여 물질을 확인한 후 할로겐화합물에 민감한 GC/ECD를 사용하여 시료를 분석하였다. pH와 시간, 원수중의 유기물 함량이 소독부산물의 생성에 많은 영향을 미치는 것으로 나타났다. THMs은 알칼리에서, HAAs의 경우는 약산성에서 접촉시간이 증가할수록 높은 생성능을 보였고, HANs의 경우는 급속히 생성했다가 시간이 경과함에 따라 소멸하며 약산성에서 높은 생성능을 보임을 알 수 있었다, 강별로는 낙동강에서 THMs파 HANs의 생성능이 비교적 높았고, 영산강에서는 HAAs의 생성능이 높았다. 각 원수의 특성에 따른 생성능을 파악함으로써 생성능 저감방안을 마련하며, 소독 부산물질의 인체노출평가에 따른 위해성평가를 통해 관리기준을 설정해야 할 것이다.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.242-255
• /
• 2020

The numerical simulations of Heater Experiment-D (HE-D) at the Mont Terri rock laboratory in Switzerland were performed to investigate an applicability of FLAC3D to reproduce the coupled thermo-hydro-mechanical (THM) behaviour in Opalinus Clay, as part of the DECOVLEX-2015 project Task B. To investigate the reliability of numerical simulations of the coupled behaviour using FLAC3D code, the simulation results were compared with the observations from the in-situ experiment, such as temperature at 16 sensors, pore pressure at 6 sensors, and strain at 22 measurement points. An anisotropic heat conduction model, fluid flow model, and transversely isotropic elastic model in FLAC3D successfully represented the coupled thermo-hydraulic behaviour in terms of evolution for temperature and pore pressure, however, performance of the models for mechanical behavior is not satisfactory compared with the measured strain.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.101-112
• /
• 2013

Integrated process with coagulation and microfiltration as an advanced water treatment has been expanded its application in recent years due to its superb removal of particles and natural organic matter. In usual, effectiveness of coagulation sometimes determines performance of the whole system. Several new polymeric coagulants introduced to water utilities for better efficiency were studied in this paper. Three polymeric coagulants (i.e., PACl, PACs, and PAHCs) along with alum were evaluated for removal of natural organic matter, especially for reduction of trihalomethane formation potential, for which regulation has become stringent. Turbidity removal was closely related to pH variation showing the reduced turbidity removal by PACs due to the decreases in the pH of supernants at high doses. The four coagulants showed different organic matter removal during coagulation and affected the removal in microfiltration. For instance, DOC concentration was not reduced by microfiltration when PAHCs were used however 10 % of DOC removal was observed by microfiltration with alum coagulation. Coagulation pretreatment also impacted the THM removals, i.e., approximately 30 % of THMs and 13 % of DOC was removed by microfiltration only, but 40 to 67 % of THMs and 30 % of DOC was removed by the integrated process. Strategies on selection of coagulants are needed depending on characteristics of target pollutants in raw waters.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.351-358
• /
• 2012

Formation of disinfection by-products (DBPs) including trihalomethans (THM), haloacetic acid (HAA) and haloacetonitriles (HAN) from chlorination of extracellular organic matter (EOM) and cells + intracellular organic matter (IOM) of Microcystis sp., a blue-green algae, during decomposed period was investigated. Microcystis sp. cells + IOM and EOM of Microcystis sp. exhibited a high potential for DBP formation. HAAFP (formation potential) was higher than THMFP during decomposed period. In the variations of HAAFP species during decomposed period, the ratio of di-HAAFP species was gradually decreased and the ratio of tri-HAAFP species was gradually increased in the case of EOM during decomposed period, while the opposite result was in the case of cells + IOM during decomposed period. In the variations of HANFP species during decomposed period, the ratio of di-HANFP species was much higher than the ratio of tri-HAAFP species.

• Journal of Environmental Science International
• /
• v.8 no.6
• /
• pp.685-690
• /
• 1999

The pollution characteristics of groundwaters in Taegu City and correlation coefficients(r) between water pollution indicators were investigated for two years from January 1996 to December 1997. Volatile organic compounds such as TCE(tri-chloroethylene), PCE(tetrachloroethylene), l,l,l-trichloroethane, THM(trihalo-methane), dichloromethane, pesticides such as diazinon, parathion, malathion, and toxic inoganic matters such as As, Hg, Se, Pb, Cd, $Cr_6^+,$ CN were not detected in the groundwaters. Mean values of groundwater pollution indicators were below drinking-water standards, but hardness, $KMnO_4-C(potassium$ permanganate consumption), evaporate residues, $SO_4^{-2},\;Fe,\;NO_3^{-}-N,$ color and turbidity exceeded a little in some samples. As groundwater became deeper, hardness and evaporate residues remarkably increased, but $KMnO_4-C,\;NO_3^{-}-N,\;Cl-,$ color, turbity and bacteria decreased. $KMnO_4-C,$ evaporate residues, $Cl^-\;and\;SO_4^{-2}$ were very high at industrial and commercial areas, and $NO_3^--N$ and $NH_4^+-N$ were very high at agricultural and forest areas. It showed high positive significances in the relationships between hardness and each of evaporate residues, $SO_4^{-2}$, Zn and Mn, $KMnO_4-C$ and each of color, turbidity and Zn, color and each of turbidity, Cu, Zn and Mn, turbidity and each of Fe, Cu, Zn and Mn, and evaporate residues and each of $Cl^-,\;SO_4^{-2}$ and Zn.

• The Journal of Natural Sciences
• /
• v.14 no.1
• /
• pp.39-50
• /
• 2004

T7 RNA polymerase is a single subunit RNA polymerase able to accomplish whole transcription process without auxiliary factors. In order to study transcription elongation mechanism of phage T7 RNA polymerse, stepwise walking of RNA polymerase was established by immobilizing biotinylated DNA template with streptavidin bead, series of active and stable elongation complexes were obtained, Transcripts were radio isotope labeled at the 16thm 17th and 18th nucleotide residues so stable elongation transcription complex of T7 RNA polymerase containing 22-40 nucleotide residues could be identified. We identified the positions of stablely formed transcription elongation complexes of termination site in intrinsic hairpin-independent PTH terminator sequence through the established stepwise walking of wild-type of mutant R173C T7 RNA polymerases. The results suggest that stable elongation transcription complexes were at the site of passing PTH terminator signal by mutant R173C RNA polymerase.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.771-779
• /
• 1989

Numerical analysis by SIMPLE algorithm has been performed to predict the characteristics of flow and heat transfer in channels between the printed circuit boards of an electronic cabinet. It is assumed that the electronic parts release uniform heat flux per unit axial length to the cooling air. The air flow between channels is assumed fully developed laminar, incompressible, and mixed convective. In this study, the electronic parts are mounted on both sides of the prinked circuit boards by two kinds of configuration such as the zig-zag and the symmetric one. The Rayleigh numbers ranging from 0 to 10$^{6}$ are considered to predict the characteristics of the main flow and the secondary flow occurred by natural convection, the temperature distribution in channel, the heat transfer rate from heated electronic parts and the increase of friction factor by natural convection. As the results of numerical calculation, several conclusions are drawn as follows. The influence of natural convection on the flow characteristics appears strong when the Rayleigh number is above 10$^{4}$. The main axial flow rate decreases by a half or more at the Rayleigh number of 10$^{6}$ . Although the friction factor increases as Rayleigh number increases, the increasing rate of heat transfer is higher than that of the friction factor. The cooling efficiency of the zig-zig-configuration is superior to that of the symmetric configuration at same Rayleigh number.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.66-81
• /
• 2011

In this study, it was aimed to develop a thermal-hydraulic-mechanical coupled fracture mechanics code that models a fracture initiation, propagation and failure of underground rock mass due to thermal and hydraulic loadings. The development was based on a 2D FRACOD (Shen & Stephasson, 1993), and newly developed T-M and H-M coupled analysis modules were implemented into it. T-M coupling in FRACOD employed a fictitious heat source and time-marching method, and explicit iteration method was used in H-M coupling. The validity of developed coupled modules was verified by the comparison with the analytical result, and its applicability to the fracture initiation and propagation behavior due to temperature changes and hydraulic fracturing was confirmed by test simulations.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.23-30
• /
• 2000

Since most of the waste plastics are incinerated and landfilled for the plastic treatment, the environmental friendly processes must be introduced. The plastic utilization of plastic to the blast furnace as a substitutional fuel was developed as a useful recycling method of waste plastics, and commercialized in several ironmaking company in Europe and Japan. Present study was carried out to understand the effect of plastic injection on blast furnace process continuously by using the foundry blast furnace in POSCO. The coke replacement ratio turned out to be 0.98 with the waste plastic injection up to 13.8 kg/thm of injection rate, and there were no significant effect of the kinds of injection plastics on the replacement ratio in this test operation. The permeability in the furnace became worse and the heat load in the lower part of blast furnace was increased with increasing the injection rate of waste plastics. As the rate of plastic injection were increased, the top gas utilization and shaft efficiency were also decreased from the Rist diagram analysis.