• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.51-58
• /
• 2007

This study on the effects of local wall-thinned location on the fracture behavior of pipes was carried out, and the results were compared with the analytical results. Local wall-thinning for the bending test was machined with various sizes on the outside of pipes, in order to simulate the metal loss, due to erosion/corrosion. In addition, we had carried out FE analysis for the pipes with local wall thinning on the inside, and its results were comparatively studied with that of the outside. Three-dimensional elasto-plastic analyses were able to accurately simulate fracture behaviors of inner or outer wall thinning. Fracture types, obtained from the experiments and analyses, could be classified into ovalization, local buckling and crack initiation, depending on the thinned length and thinned ratio. Based on the results, the fracture behaviors of pipes with the outer wall thinning can be applied to estimate the fracture behaviors of pipes with the inner wall thinning.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.392-392
• /
• 2010

In this study, high-speed chemical dry thinning process of Si wafer and evolution of surface roughness were investigated. Direct injection of NO gas into the reactor during the supply of F radicals from $NF_3$ remote plasmas was very effective in increasing the Si thinning rate due to the NO-induced enhancement of surface reaction but thinned Si surface became roughened significantly. Addition of Ar gas, together with NO gas, decreased root mean square (RMS) surface roughness of thinned Si wafer significantly. The process regime for the thinning rate enhancement with reduced surface roughness was extended at higher Ar gas flow rate. Si wafer thinning rate as high as $22.8\;{\mu}m/min$ and root-mean-squared (RMS) surface roughness as small as 0.75 nm could be obtained. It is expected that high-speed chemical dry thinning process has possibility of application to ultra-thin Si wafer thinning with no mechanical damage.

• Corrosion Science and Technology
• /
• v.17 no.6
• /
• pp.317-323
• /
• 2018

Assumptions have always been that wall thinning on the secondary side piping in nuclear power plants is mostly caused by Flow-Accelerated Corrosion (FAC). Recent studies have showed that wall thinning on the secondary side piping is caused by Liquid Droplet Impingement Erosion (LDIE), Solid Particle Erosion (SPE), cavitation, and flashing. To manage those aging mechanisms, several software such as CHECWORKS, COMSY, and BRT-CICERO have been used in nuclear power plants. Korean nuclear power plants have been using the CHECWORKS program since 1996 to date. However, many site engineers have experienced a lot of inconveniences and problems in using the CHECWORKS program. In order to work through the inconveniences and to remedy problems, KEPCO-E&C has developed a "3D-based pipe wall thinning management program (ToSPACE)" based on the experience of over 30 years in relation to the pipe wall thinning management. This study compares the results of FAC and LDIE analysis using both the CHECWORKS and ToSPACE programs with respect to validation of the wall thinning analysis results.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.150-164
• /
• 2022

This study was conducted to provide basic information for the development of silvicultural guidelines and manuals. This was achieved through analysis of tree and stand characteristics according to the first and second thinning in Korean white pine plantations. Data were collected from permanent plots installed at Korean white pine plantations according to thinning intensity, and residual tree and stand variables, including diameter at breast height (DBH), volume, and mortality at age 19-43, were analyzed using data repeatedly collected in 4-5 measurements by experiments. According to one-way variance of analysis, tree DBH and volume were significantly different according to thinning intensity (p<0.05). DBH distribution was skewed to the left side over time as thinning intensity was heavier. Thus, tree DBH values were larger in heavy thinning plots with increased age. The periodic annual increment (PAI) of DBH was higher with heavier thinning intensity and fewer years after thinning. The PAI range by thinning intensity was 0.48-0.95 cm/year at age 19-24. In addition, the PAI increased in heavy thinning plots after the second thinning; The PAI range by thinning intensity was 0.29-0.67 cm/year after the second thinning at age 37-42. The PAI of tree volume differed according to thinning intensity, and the PAI value did not decrease obviously, in contrast to the pattern of the DBH PAI. Stand volume was generally higher in high-density stands, and the PAI of stand volume was high in unthinned and light thinning plots. Mortality was highest in unthinned plots, and the differences in mortality according to thinning intensity increased over time. Consequently, the growth of DBH and tree volume was lower as stand density increased, but this growth was facilitated with appropriate first and second thinning operations.

• Korean journal of applied entomology
• /
• v.49 no.3
• /
• pp.187-198
• /
• 2010

Thinning treatment has a huge effect on understory and litter structures in forest ecosystem, and the resulting changes may impact some arthropod groups such as plant-feeders and detritivores. This study was carried out to find a change in arthropod abundance and their structures in relation to the thinning activity in a Pinus koraiensis plantation in Chuncheon, Korea, where thinning was conducted twice: in 1998-2000 (old-thinning) and 2007 (new-thinning). Arthropods were collected using pitfall traps in 2006 and 2008. Effects of old-thinning on change of abundance and community structure of arthropod were significant, but the effects of new-thinning were not significant. The most significant thinning effect was found in detritivores, followed by plant feeders, but the effect was hardly significant in predators. Among detritivores the changes in abundance was diverse. The abundance of orthopteran plant-feeder increased, but Curculionidae declined after thinning. There was not different in abundance of total arthropods between thinned and unthinned areas because the difference may have cancelled each other out by increased or decreased abundance of taxa. Community structures of arthropods were most greatly affected by years, followed by the old-thinning, but the new-thinning did not affect community structures.

• Korean Journal of Ecology and Environment
• /
• v.53 no.2
• /
• pp.208-219
• /
• 2020

Forest thinning brought the large variation to forest ecosystem including environment and animal. Our study was result of long-term monitoring for ground-dwelling arthropod communities after thinning in forest ecosystem. In this study, we conducted field study on plantation forest in Chuncheon, Korea in 2018, and compared with previous study data (2006 and 2008). We found that the effect of thinning was still existent 10 years later from thinning with difference of habitat environment(depth of ground organic matter, coverage rate of ground vegetation and canopy). And ground-dwelling arthropod communities showed changes of abundance and taxa at the study area and thinning conditions. Ground-dwelling arthropod communities in 2018 were dominant in the order of Diptera, Hymenoptera, Coleoptera (Insecta), Araneae (Arachnida) and Collembola (Collembola). Among the conditions of thinning, Araneae (Arachnida), Coleoptera and Hymenoptera (Insecta) showed amount of abundance in heavy thinning. And Collembola (Collembola) and Diptera (Insecta) were most common in area of light thinning. In 2018 ground-dwelling arthropod communities, abundance of Diptera and Coleoptera (Insecta) and Isopoda (Crustacea) were decreased although Hemiptera and Orthoptera (Insecta) were increased than 2008 arthropod communities. Arthropod communities in 2018 were more similar with those in 2008 (after thinning) than with those in 2006 (before thinning).

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.742-749
• /
• 2007

The objective of this study was to develop thinning effect analysis model (TEAM) using individual-tree distance-independent growth model of Pinus koraiensis Stands. The TEAM was designed to analyze thinning effects associated with such thinning prescriptions as the number, timing, intensity, and method of thinnings. To testing TEAM application, stand growth effects were compared with seven scenarios according to thinning prescription plan. In the results, it was possible to estimate the number of trees, height, volume with diameter (DBH) class of individual trees, and average diameter growth, height growth, the number of trees and volume growth per ha of stands. The result of sensitivity analysis on one Pinus koraiensis stand, it was not sure to expect the much more volume at the rotation age by stand density control applying thinning prescription. In the case of thinning, total yield volume has much more $40{\sim}75m^3$ per ha, within 5 cm in average diameter growth and within 1 m in average height growth than thats of non-thinning over increasing stand age. TEAM, as decision making support system, can be used for selecting the thinning prescription trial and determining one of some thinning prescription plan in different site specific stand environments.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.263-268
• /
• 2008

Estimates of genetic gain (in volume growth) and diversity (expressed as status number, $N_s$) were determined in a clonal seed orchard of Pinus koraiensis. The genetic thinning was based on clonal breeding values (represented by general combining ability) obtained from progeny tests, clonal fertility estimated by strobilus production, and clonal size variation determined by the ramet numbers per clone. Parental GCA values for volume growth were calculated, based on height and diameter at breast height measured from field trials. Clonal fertility was estimated from the assessments of strobilus production over twelve years from 1991 to 2003, and used for the calculation of status number. There are 179 clones and 5,268 ramets in 12ha area of P. koraiensis clonal seed orchard. Genetic gain and diversity estimates were determined under assumptions of 30% pollen contamination and inferior genetic value of contaminating pollen. Genetic gain increased as thinning rates were set from 10% to 60%. However, for the higher thinning intensities, the increase of genetic gain was not remarkable. Genetic thinning by means of truncation selection resulted in a greater genetic gain but a large decrease in status number. Status number was represented around 40 clones for 10% through 60% thinning intensities, but for the higher thinning intensities, it was a bit fluctuated. Based on the present results, it could be concluded that thinning rate should not be stronger than 60% to optimize genetic gain while conserving genetic diversity. Consequently 50% or 60% thinning rate might be appropriate for genetic thinning in the clonal seed orchard of P. koraiensis. The effect of pollen contamination on the genetic gain and the consequence of genetic thinning for seed production in the clonal seed orchard, and seed orchard management scheme were also discussed.

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.290-295
• /
• 2015

The experiment were carried out in 7-year-old ‘Campbell Early’ grape to increase work efficiency by fruit cluster thinning methods (Pedicel and berry thinning). Pedicel thinning, such as labor-saving cluster thinning of grape, was 6.7 fold higher than the berry thinning for work efficiency. The fruit cluster weight and number of berry were lower in the fruit cluster thinning fruits than in the none-fruit cluster thinning, however, the soluble solid content (SSC) was high and titratable acidity (TA) was low in the fruit cluster thinning fruits than in the none-fruit cluster thinning fruits. Therefore, the bruising rate of berries was decreased in the fruit cluster thinning fruits. Quality uniformity by fruit cluster thinning was proper in fruit cluster weight of 350~450 g when SSC and TA in part of lower, middle and upper of cluster was considered.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.349-356
• /
• 2019

This study examines the effect of thinning in terms of changes in the growth characteristics of Chamaecyparis obtusa stands after they were thinned with varying intensity in Gochang, North Jeolla Province, Korea. Thinning was carried out in 2000 on Chamaecyparis obtusa stands (22 years old), and the stands were categorized in terms of the thinning intensity in the experiment: very heavy, heavy, medium, light, and control. The results of monitoring up to 2018 revealed that the diameter at breast height and the growth rate of individual trees after thinning had a positive correlation with the thinning intensity, whereas the stand volume showed a negative correlation. The height to diameter (H/D) ratio decreased by up to 70-80 due to the increased diameter at breast height after thinning and thereby resulted in better quality. The relative yield index right after the first thinning was between 0.75 and 0.95, which suggests the best timing for the first thinning had been missed. This study's findings are expected to serve as a basic reference in establishing the thinning system for Chamaecyparis obtusa forests.