• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.165-165
• /
• 2006

We prepared nonlinear optical (NLO) polymers possessing thermal and temporal stability, which were based on the polyimides appended with NLO chromophores. NLO chromophores with a terminal hydroxyl group have been synthesized by coupling between aminobenzene or julolidine donor and phenylene bridge, and then subsequent coupling between the resulting product and tricyanofuran acceptor. The chromophores were chemically bonded to the polyimides backbone through Mitsunobu reaction. The NLO polymers showed $160-170^{\circ}C$ of Tgs and were thermally stable up to $200^{\circ}C$. We obtained optical quality films by spincoating and evaluated their electro-optical properties and temporal stability.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.493-496
• /
• 2010

At present, Metal Oxide gas Sensors (MOXs) are widely used in gas detection because of its advantages, including high sensitivity and low cost. However, MOX presents well-known problems, including lack of selectivity and environment effect, which has motivated studies on different measurement strategies and signal-processing algorithms. In this paper, we present an artificial neural network (ANN) that models an MOX sensor (TGS822) used in a dynamic environment. This model takes into account dependence in relative humidity and in gas nature. Using MATLAB interface in the design phase and optimization, the proposed model is implemented as a component in an electronic simulator library and accurately expressed the nonlinear character of the response and that its dependence on temperature and relative humidity were higher than gas nature.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.353-355
• /
• 1988

The properites of Zn-diffusion in III-V ternary alloy semiconductor $In_{1-x}Ga_{x}p$, which was grown by the temperature gradient solution (TGS) method, have been investigated. The composition, x, dependence of the Zn-diffusion coefficient at $850^{\circ}C$ and the activation energy for Zn-diffusion into $In_{1-x}Ga_{x}p$ were found to be $D850^{\circ}C$(x)= $3.935{\times}10^{-8}exp(-6.84{\cdot}x)$, and $E_{A}(x)=1,28+2,38{\cdot}x$, respectively. From this study, we confirm that the Zn-diffusion in $In_{1-x}Ga_{x}p$ was explainable with the diffusion mechanisms of the interstitial-substitutional, which was widely accepted mechanisms in the III-V binary semiconductors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.881-884
• /
• 2002

Kerberos 시스템은 MIT에서 Athena 프로젝트의 일환으로 개발된 인증 시스템으로 인증되지 않은 사용자들의 불법 접속을 방지하고, 인증된 사용자에게 서비스 이용 권한을 제공하려는 목적을 가지고 있다. 이 시스템은 인증 서버(AS: Authentication Server)와 티켓 승인 서버(TGS: Ticket Granting Server) 그리고 서비스 제공 서버(SPS; Service Provide Server)로 구성된다. 사용자는 서비스 제공 서버와 관용 암호 알고리즘에 사용할 비밀키를 공유하고, 이를 이용하여 서비스를 제공받는다. 본 논문에서는 키 복구 기능과 향상된 인증 서비스를 제공하는 Kerberos 시스템을 제안한다. 제안하는 시스템은 사용자와 서비스 제공 서버간에 키 분배를 수행하고, 서비스 제공 서버는 분배된 키를 이용하여 서비스를 제공한다. 이때 분배된 키는 사용자의 요청에 따라 인증 서버와 티켓-승인 서버에 의해 복구될 수 있다.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.211-214
• /
• 2020

Chlorine dioxide is very effective gas for sterilization or disinfection (in manufacturing), and does not produce harmful by-products after use. However, if its concentration exceeds 10 %, it become explosive and cannot be compressed or stored. Therefore, it is necessary to measure its concentration. In this study, the concentration of chlorine dioxide with a high oxidizing strength was measured using a metal oxide sensor. The sensor was a commercially available TGS series from Figaro. The sensitivity of the sensor was inversely proportional to a low concentration of chlorine dioxide gas below 6 ppm and returned to the initial resistance at about 6 ppm. When the gas concentration reached multiples of 10 ppm, resistance of the sensor increased to several megaohms.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.443-449
• /
• 1995

N-(Isopropyloxycarbonyloxy)maleimide (iPOCMI) has been synthesized and polymerized to give both the homopolymer and copolymers with substituted styrenes. These polymers were readily deprotected by thermolysis of the isopropyloxycarbonyl (iPOC) groups to provide the corresponding N-hydroxymaleimide (HOMI) polymers. The homopolymer and styrenic copolymers of iPOCMI were radically obtained in higher conversion and higher molecular weight than those obtained by direct polymerizations of N-hydroxymaleimide. The homopolymer of iPOCMI was transformed into poly(N-hydroxymaleimide)P(HOMI) by thermolysis of iPOC groups at 205 $^{\circ}C$ with concurrent release of propene and carbon dioxide. The copolymer of iPOCMI and styrene was thermally deprotected to the copolymer of HOMI and styrene at 235 $^{\circ}C.$ The mass loss was 28% and the Tg of the resulting copolymer was 250 $^{\circ}C.$ The thermal deprotection readily provided the desired, polar HOMI polymers which have Tgs above 240 $^{\circ}C.$ The deprotection was accompanied by large changes in aqueous base solubility.

• Korean Journal of Exercise Nutrition
• /
• v.17 no.2
• /
• pp.49-55
• /
• 2013

Our purpose was to investigate the effect of a 5-week high-fat diet on the body weight, blood components [triglycerides (TGs), free fatty acids (FFAs), and glucose], and lipoprotein lipase (LPL) mRNA expression in the skeletal muscles of rats. Body weight increased overtime in experimental and control groups without significant differences. In terms of the blood components, the density of TG was significantly lower in the high-fat diet group compared to the control, whereas FFA and glucose levels were similar in the two groups. Although the levels of glyceraldehyde 3-phosphate dehydrogenase(GAPDH) mRNA expression were similar between the groups, LPL mRNA expression was significantly higher in the high-fat diet group than that in the control group. The results of this study suggest that a high-fat diet enhances LPL mRNA expression, as well as possibly increases fat metabolism. For a better understanding of the relationship between diet patterns and fat metabolism, further analysis of genes related to the fat metabolism is warranted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.375-383
• /
• 2011

Recent advances in digital technology and diversified internet services have resulted in a rapid growth of research on monitering systems using embedded web servers in USN systems. In designing USN systems equipped with wireless sensor modules requiring extra power for heating sensors for their appropriate operations, excessive power consumption introduces inefficiency to the entire system. In this paper, using embedded systems in web environment, we develop a remote-monitoring system with VOC (Volatile Organic Compounds) sensor signal, and propose a real time method of processing sensor-data streams by way of the serial bus from the sensor module in the USN system. The proposed system has an advantage of monitering the harmful gases on real-time basis and can be used semi-permanently by providing the sensor module with power through the serial bus. The harmful gas to be detected by the VOC sensor module is Toluene and the sensor module is composed of TGS-2602 VOC(Volatile Organic Compounds) sensors of FIGARO. The detected signal is transferred to the embedded web server using the RS-485 serial communication device. The proposed remote VOC monitering system is designed to coordinate in such a way that the VOC sensor module and embedded web server (EMPOS-II) work together effectively for real time monitering of harmful gases on the web at any places where the internet is connected.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.372-375
• /
• 1988

The III-V ternary alloy semiconductor $In_{l-x}Ga_{x}As$ were grown by the temperature Gradient of $0.60{\leq}x{\leq}0.98$. The electrical properties were investigated by the Hall effect measurement with the Van der Pauw method in the temperature range of $90{\sim}300K$. $In_{l-x}Ga_{x}As$ were revealed n-type and the carrier concentration at 300K were in the range of $9.69{\times}10^{16}cm^{-3}{\sim}7.49{\times}10^{17}cm^{-3}$. The resistivity was increased and the carrier mobility was decreased with increasing the composition ratio. The optical energy gap determined by optical transmission were $20{\sim}30meV$ lower than theoretical valves on the basis of absorption in the conduction band tail and it was decreased with increasing the temperature by the Varshni rule. In the photoluminescence of undoped $In_{l-x}Ga_{x}As$ at 20K, the main emission was revealed by the radiative recombination of shallow donor(Si) to acceptor(Zn) and the peak energy was increased with increasing the composition, X. The diffusion depth of Zn increases proportionally with the square root of diffusion time, and the activation energy for the Zn diffusion into $In_{0.10}Ga_{0.90}As$ was 2.174eV and temperatures dependence of diffusion coefficient was D = 87.29 exp(-2.174/$K_{B}T$). The Zn diffusion p-n $In_{x}Ga_{x}As$ diode revealed the good rectfying characteristics and the diode factor $\beta{\approx}2$. The electroluminescence spectrum for the Zn-diffusion p-n $In_{0.10}Ga_{0.90}As$ diode was due to radiative recombation between the selectron trap level(${\sim}140meV$) and Zn acceptor level(${\sim}30meV$). The peak energy and FWHM of electroluminescence spectrum at 77K were 1.262eV and 81.0meV, respectively.

• Clean Technology
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2019

Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.