• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.329-334
• /
• 1986

The bacteria capable of utilizing polyethylene glycol(PEG) 6,000 as a sole carbon source were isolated from soil and sewage water connected to factory area. The isolate designated as EL-033 had high biodegradability on PEG 6,000, and was identified as Micrococcus sp. Micrococcus sp. EL-033 could grow on and degrade di-, tri-, tetraethylene glycols and PEGs with molecular weight up to 6,000 and very slowly stilize PEG 20,000 as sole carbon source, but not degrade ethylene glycol. The growth rate of isolate was increased in the higher molecular weight PEGs. The optical culture medium was established to be as follow: PEG 6,000, 0.2%(w/v); $K_2HPO_4$, 0.1%; $NaH_2PO_4{\cdot}12H_2O,\;0.1%\;:\;MgSO_4{\cdot}7H_2O$, 0.05%; polypeptone, 0.1% in distilled water, pH7.5. About 90% of PEG 6,000 was degraded in exponential phase of 48h culture and PEG 6,000 was completely degraded during 72h.

• Journal of the Korean Ceramic Society
• /
• v.43 no.8 s.291
• /
• pp.463-468
• /
• 2006

Hydrothermal deposition of hydroxyapatite coatings on two types of $ZrO_2$ substrates (3 mol% $Y_2O_3$-doped and 13 mol% $CeO_2$-doped tetragonal $ZrO_2s$) was studied using aqueous solutions of $Ca(NO_3)_2\;4H_2O$ and $(NH_4)_2HPO_4$ containing EDTA (ethylene diamine tetra acetic acid) disodium salt as a chelating agent for $Ca^{2+}$ ions. For the precipitation of the coatings, the $EDTA-Ca^{2+}$ chelates were decomposed by oxidation with $H_2O_2$ at $90^{\circ}C$. The deposition behavior, morphology, and orientation of the coatings were investigated while varying the solution pH using scanning electron microscopy and X-ray diffractometry. For the two sub-strates, sparse deposition of the coating was obtained at pH 5.5, whereas a uniform deposition was obtained at pH 7.1, 9.8, and 11.4 with a denser microstructure for the higher pH. The coating consisted of thin needle-like or plate-like crystals ($1-2{\mu}m$ length or diameter) at pH 7.1, but fine rod-like crystals ($1-2{\mu}m$ length, $0.1{\mu}m$ diameter) at pH 9.8 and 11.4. The coatings were $1-3{\mu}m$ thick and showed a preferred orientation of the hydroxyapatite crystals with their c axis (i.e., the elongated direction) perpendicular to the substrate surface especially for pH 9.8 and 11.4.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.764-772
• /
• 2016

This paper presents on the evaluation of numerical analysis model of a ball valve used for a gas pipeline. The ball valve has important role to control the gas flow of the pipeline as well as safety operation to prevent gas explosion at the emergency. For the validation of numerical simulation, the computational domains are introduced three different types: a hexahedron chamber connected to a pipeline outlet without considering the geometry of pressure tubes, a pipeline only considered the geometry of pressure tubes, and a pipeline connected both of the a hexahedron chamber and pressure tubes. The commercial code, SC/Tetra, is introduced to solve the three-dimensional steady-state Reynolds-averaged Navier-Stokes analysis in the present study. The valve flow coefficient and valve loss coefficient with respect to the valve opening rate of 30%, 50%, and 70% are compared with experimental results. Throughout the numerical analysis for the three analysis domains, pressure computed along the pipeline is affected by computational domains. It is noted pressure obtained by the computational model considering both of the a hexahedron chamber and pressure tubes has a relatively good agreement to the experimental data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.545-545
• /
• 2008

Poly-Si is an essential material for floating gate in NAND Flash memory. To fabricate this material within region of floating gate, chemical mechanical polishing (CMP) is commonly used process for manufacturing NAND flash memory. We use colloidal silica abrasive with alkaline agent, polymeric additive and organic surfactant to obtain high Poly-Si to SiO2 film selectivity and reduce surface defect in Poly-Si CMP. We already studied about the effects of alkaline agent and polymeric additive. But the effect of organic surfactant in Poly-Si CMP is not clearly defined. So we will examine the function of organic surfactant in Poly-Si CMP with concentration separation test. We expect that surface roughness will be improved with the addition of organic surfactant as the case of wafering CMP. Poly-Si wafer are deposited by low pressure chemical vapor deposition (LPCVD) and oxide film are prepared by the method of plasma-enhanced tetra ethyl ortho silicate (PETEOS). The polishing test will be performed by a Strasbaugh 6EC polisher with an IC1000/Suba IV stacked pad and the pad will be conditioned by ex situ diamond disk. And the thickness difference of wafer between before and after polishing test will be measured by Ellipsometer and Nanospec. The roughness of Poly-Si film will be analyzed by atomic force microscope.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.246-251
• /
• 2013

With -$OCH_2CO$- as a linker, a non ${\beta}$-substituted cationic bisporphyrin (4a) and a ${\beta}$-substituted cationic bisporphyrin (4b) were prepared through methylation of the intermediate which was obtained from ${\beta}$-amino-5,10,15,20-tetra (4-cyanophenyl) porphyrin or 5-hydroxylphenyl-10,15,20-tris(4-cyanophenyl) reacting with 5-hydroxy-10,15,20-trispyridinylporphyrin. Their structures were confirmed by $^1H$ NMR, IR, UV-vis, MS and elemental analysis. DNA photocleavage ability and the singlet oxygen ability of those cationic bisporphyrins were investigated. DNA photocleavage activity of ${\beta}$-substituted cationic bisporphyrin was significantly weaker than that of $H_2TMPyP$, but similar to that of non ${\beta}$-substituted cationic bisporphyrin. While 4a and 4b showed substantial photocleavage activities toward DNA, with 68% and 66% observed at 10 ${\mu}M$. The assessment of indirectly measured $^1O_2$ production rates against $H_2TMPyP$ were described and the relative singlet oxygen production yields were: free cationic bisporphyrins > $H_2TMPyP$. The results showed the cationic bisporphyrins with ${\beta}$-substitution and non ${\beta}$-substitution could be developed as potential photodynamic agents.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.2
• /
• pp.99-114
• /
• 2005

Chromosome number, morphological variation and RAPD analysis were investigated to study on the speciation of Indigofera in Korea. Chromosome numbers of I. kirilowii (2n=16) and I. koreana (2n=32) are consistent with the previous reports. In this study tetraploid (2n=32) and hexaploid (2n=48) of I. grandiflora are newly observed. Indigofera grandiflora is distributed around Mt. Kaya area together with I. kirilowii and I. koreana. The former species has the larger sizes in plant height, leaves and flowers than the latter two and shows intermediate form between the two species in hairs on leaves and flowers which are one of the most important taxonomic characters in this group. In the RAPD analysis, I. grandiflora is similar to I. koreana than I. kirilowii but RAPD band patterns revealed difference between tetra- and hexaploid of the species. These results suggested that Korean endemic species of I. grandiflora (2n=16, 32, 48) might has multiple origin through polyploidization and/or hybridization between I. kirilowii (2n=16) and I. koreana (2n=32) around Mt. Kaya area where the latter two grow together.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2002

Polymerization of carboxylated styrene-butadiene latex takes longer time than that of acrylic emulsion due to delocalization of radical in butadiene unit having conjugated double bond. A latex stability is the most important properties owing to use intact without separating polymer from base latex. For reducing polymerization time without decreasing any properties of latex, carbon tetra-chloride which has been used as the most popular chain transfer agent was replaced to combination of tert-dodecylmercaptane and ${\alpha}$-methylstyrene dimer. The replacement yielded reducement or 2 hr in polymerization time. In the increment step, charge amount of acrylic acid was limited to 0.3 part to restrain viscosity enhancement. Just after initial step, addition of 0.1 part acrylamide prevent polymer chain from diffusing between two region followed by giving hardness and final good adhesive force to latex particles.

• The Korea Journal of Herbology
• /
• v.23 no.3
• /
• pp.155-162
• /
• 2008

Objectives : This study was evaluated to elucidate the inhibitory potential of Bodusan (BDS) and its components, Strychnos ignatii semen (SIS) and Glycyrrhizae Radix (GR), on human aortic smooth muscle cells (HASMC) migration and production of matrix metalloproteinase (MMP)-2 and MMP-9 by $TNF-{\alpha}$ treatment. Methods : Cytotoxic activity of BDS and its components on HASMC was using 5-(3-caroboxymeth- oxyphenyl)-2H-tetra-zolium inner salt (MTS) assay. Effect of BDS, SIS and GR on $TNF-{\alpha}-induced$ HASMC migration underside of matrigel filter was stained with hematoxylin-eosin. And total number of cells that migrated to the underside of the filter was counted. MMP-2 and MMP-9 activity was evaluated by gelatin zymography assay. Results : The matrigel migration assay showed that BDS effectively inhibited the $TNF-{\alpha}-induced$ migration of HASMC. Moreover, BDS significantly inhibited MMP-9 activity. Our present study demonstrates that BDS and its components inhibits $TNF-{\alpha}-induced$ HASMC migration and MMP-9 activity. The inhibitory effect of BDS extract is more potent than that of its component herb extracts. Conclusions : These results provide evidence that BDS has multiple effects in the inhibition of HASMC migration and may offer a therapeutic approach to block HASMC migration.

• The Korea Journal of Herbology
• /
• v.25 no.2
• /
• pp.89-98
• /
• 2010

Objective : The aim of this study was to determine whether methanol extract of Keum-Ryung-Ja-San (KRJS) inhibit production of NO, $PGE_2$, iNOS, COX-2 and pro-inflammatory cytokines in lipopolysaccharide (LPS)-treated RAW 264.7 macrophages. Methods : Cytotoxic activity of extracts on RAW 264.7 cells was measured using 5-(3-caroboxymeth-oxyphenyl)-2H-tetra-zolium inner salt (MTS) assay. The nitric oxide (NO) production was measured by Griess reagent system. And proinflammatory cytokines and PGE2 were measured by ELISA kit. The levels of inducible nitric oxide synthase (iNOS), cyclooxygenase-2(COX-2), $I{\kappa}-B-\alpha$ and nuclear NF-${\kappa}B$ p65 expression were detected by western blot. Results : Our results indicated that methanol extract of KRJS significantly inhibited the LPS-induced NO, $PGE_2$ production and iNOS, COX-2 expression accompanied by an attenuation of TNF-$\alpha$, IL-$1{\beta}$ and IL-6 production in RAW 264.7 cells. Moreover, methanol extract of KRJS treatment also blocked LPS-induced NF-${\kappa}B$ activation. Conclusion : These findings indicate that methanol extract of KRJS inhibits the production of pro-inflammatory mediators and cytokines via suppression of NF-${\kappa}B$ activation. Take together, these results indicate that methanol extract of KRJS has the potential for use as an agent of anti-chronic inflammatory diseases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.4
• /
• pp.318-323
• /
• 2000

The intercalated compounds of alkylsulfonates into hydrated zinc were synthesized. From the high temperature powder X-ray diffraction (HTXRD), FT-IR, and molecular size, the temperature dependence of orientation for the intercalated alkylsulfonates were determined. In the temperatures range 1, alkylsulfonates were intercalated into hexa aqua zinc layer with the bilayer structure of $32.9^{\circ}$angle for ${Zn(H_2O_4]^{2+}[C_nH_{2n+1}SO_3]_2\;^-$. In the temperatures range 2, alkylsulfonates were intercalated into tetra aqua zinc layer with the bilayer structure of $55.2^{\circ}$angle for ${Zn(C_nH_{2n+1}SO_3)_2$. In the temperatures range 3, alkylsulfonates were directly bonded to zinc ion with the bilayer structure of $76.5^{\circ}$angle for ${Zn(C_nH_{2n+1}SO_3)_2$.