• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.119-139
• /
• 2017

Static Penetration Test (CPT) and Dynamic Penetration Test (DPT) are commonly used in-situ tests in a routine geotechnical investigation. Besides their use for qualitative investigation (lithology, homogeneity and spatial variability), they are used as practical tools of geotechnical characterization (resistance to the penetration, soil rigidity) and modern foundation design as well. The paper aims at presenting the results of an extensive research work on the evaluation of the 1D primary consolidation settlement of saturated clayey soils on the basis of the CPT or DPT tests. The work is based on an analysis of the correlations between the tip resistance to penetration measured in these tests and the parameters of compressibility measured by the compressibility oedometer test, through a local geotechnical database in the northern Algeria. Such an analysis led to the proposal of two methods of calculation of the settlement, one based on the CPT test and the other one on the DPT. The comparison between the predicted settlements and those computed on the basis of the oedometer test showed a good agreement which demonstrate the possbility to use the CPT and DPT tests as reliable tools of computation of foundation settlements in clayey soils.

• 대한간호학회지
• /
• 제13권3호
• /
• pp.95-105
• /
• 1983

The purpose of this study was investigated the effects of education for nursing concept to the nursing students who are not attended to major course of nursing education in nursing college. it is hoped that this education for nursing concept will be contribute to positive nursing conceptualization for nursing students. The data for this study obtained from 118 students in attending college of nursing Ewha womens University(1st year; 62, End year; 56). 1st year students(experimental group) was attended to the education for nursing concept by investigators and 2nd year students(control .group) did not. After then tested to two group: Pre and post test for experimental group and post test only to control group. The results obtained were as follows: 1) In experimental group, pre-test mean score was 116.19(SD 50.46) and post-test mean score was 253.02 (SD 66.56). Therefore post-test mean score was higher than pre-test mean score (p=0.0001). 2) There were different score between the experimental group and control group. Control group was higher(207.58, SD 52.42) than experimental group(116.19, SD 50.46) at the pre-test (p=0.0002), but experimental group(253.02, SD 66.56) was higher than control group. (207 58, SD 52.42) at post-test(p=0.0001). These results implied that early intensive education for nursing concept might have positive effects on nursing conceptualization for nursing students.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.87-91
• /
• 2015

KT-1P for the Peru Air Force will be used as a utility aircraft with upgraded avionics equipment and arming capability based on KT-1 and KA-1. KT-1P should be shown for compatibility of new store loading configurations loaded with dispenser, bomb, and rocket based on aircraft-store compatibility test and evaluation procedures before KT-1P is operated as a light attack aircraft. The weapon system ground test for installation and flight test for envelope expansion including store separation are described in this paper, which was performed referring 'seek eagle program' under MIL-HDBK-1763 and MIL-HDBK-244A.

• Journal of Periodontal and Implant Science
• /
• 제28권2호
• /
• pp.249-264
• /
• 1998

The present study evaluates the effects of calcium sulfate and DFDB on alveolar bone regeneration and cementum formation and connective tissue adhesion in intrabony angulated 1 wall defects of dogs. Four millimeter-deep angulated one-wall intrabony defects were surgically created in the mesial & distal aspects of premolars and with flap operaion alone(control group), with calcium sulfate(experimental group 1), with composit graft of 50% calcium sulfate and 50% DFDB(experimental group 2), with DFDB alone(experimental group 3). Histologic analysis following 8 weeks of healing revealed the following results: 1. The lengths of connective tissue adhesion was $1.05{\pm}0.48mm$ in the control, $1.30{\pm}0.67mm$ in the test group I, $0.97{\pm}0.22mm$ in the test group II and $0.93{\pm}0.15mm$ in the test group III. There was no statistical significance between control and all experimental groups. 2. Changes in alveolar bone level was $0.97{\pm}0.27mm$ in the control group, $1.45{\pm}0.42mm$ in the test group I, $2.00{\pm}0.33mm$ in the test group II, $1.88{\pm}0.34mm$ in the test group III. There was no statistically significant difference between control and experimental group I. There was a statistically significant difference between the control and experimental group II,III.(p<0.05). There was no statistically significant difference between all experimental group. 3. Cementum formation was $1.13{\pm}0.17mm$ in the control, $1.78{\pm}0.31mm$ in the test group I, $2.17{\pm}0.38mm$ in the test group II, $2.15{\pm}0.47mm$ in the test group III with statistically significant differences between control group and all experimental group(P<0.05). There was no statistically significant differences between all experimental group. These results suggest that the use of composit graft of 50% calcium sulfate and 50% DFDB and DFDB alone in angulated 1 wall intrabony defects has little effects on connective tissue adhesion, but has significant effects on new bone and new cementum formations.

• 아동학회지
• /
• 제6권1호
• /
• pp.41-59
• /
• 1985

The present research investigated the validity and reliability of the Verbal and Figural tests of the Torrance Tests of Creative Thinking(TTCT). Its potential as a basis of normative data, and differences in children's sex and grade in school were also examined. The subjects of this study were 360 children (180 boys, 180 girls) enrolled in two public elementary schools grades 1-6. Pearson's product-moment coefficient and two-way analysis of variance were used for analyzing data collected from these tests. The present research showed a coefficient of concurrent validity of the TTCT-Verbal test of .40. The coefficient of equivalence from reliability between the TTCT-Verbal test and TTCT-Figural test was .65 (p<.01). Regarding the coefficient of interscorer reliability, the total score of the TTCT-Verbal test was .86 and that of the TTCT-Figural test was .95. The coefficient of intrascorer reliability on the total score of the TTCT-Verbal test was .93 and that of the TTCT-Figural test was .96. Generally, score reliability was .86 to .96 in total score but there were great differences in the reliability of sub-factor scores. There were no significant differences between boys and girls in the distribution of scores on the TTCT-Verbal test and the TTCT-Figural test. There were significant differences between grades (p<.01) on the distribution of total scores and subfactor scores of the TTCT-Verbal Test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.445-450
• /
• 2003

This study was performed 10 develop the accelerated life test method using Weibull-IPL(Inverse Power Law) model for mechanical components. Weibull-IPL model is concerned with determining the assurance life with confidence level and the accelerated life test time From the relation of weibull distribution factors and confidence limit, the testing times on the no number of failure acceptance criteria arc determined. The mechanical components generally represent wear and fatigue characteristics as a failure mode. IPL based on the cumulative damage theory is applied effectively the mechanical components to reduce the testing time and to achieve the accelerating test conditions. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% confidence level for one test sample. According to IPL, because test time call be shorten in case increase test load test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6666-6672
• /
• 2015

전력 케이블의 고장에 대한 위치를 검출하기 위한 다양한 반사파 계측법들이 연구되고 있다. 하지만 대부분 관련 연구들이 시뮬레이션과 실험실에서의 성능 검증이 이루어지고 있고, 실제 현장과 비슷한 조건에서의 연구는 실증 시험장의 부재로 인해 이루어지지 못하고 있다. 따라서 본 논문에서는 케이블 고장 검출 장치의 표준화된 성능 시험과, 장비 운영 교육을 위한 실증 시험장을 설계 및 구축하였다. 구축된 실증시험장에서는 100m, 200m 거리에서 단선, 합선, 반단선, 접촉 불량 고장을 발생시켰고 최대 거리 측정 시험을 위해 1km 케이블을 설치하였다. 이러한 실증시험장은 향후 케이블 고장 검출 기술의 개발과 표준화, 그리고 장비 성능 검증 및 인증 시험 등을 위해 활용될 수 있을 것이다.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.

• 한국군사과학기술학회지
• /
• 제21권1호
• /
• pp.69-73
• /
• 2018

Korean-peacekeeper's transparent armors in Iraq showed delamination, cracking and clouding a decade ago. And there were also similar deterioration recurrences in KLTV during the operational test a few years ago. Also, the differences between operational capability & lab Bullet-proof test condition, and insufficiency of military protection spec resulted in incomplete bullet-proof results. Moreover, although so many ground weapon systems have been developed, there were not secure test & evaluation codes to verify transparent armoured glasses equal to advanced-overseas products. So in this study, first, environmental test codes were established that all tests should be carried out as the application of only one specimen with newly adopted thermal shock test instead of completing each test with different one. Second, protection standards were integrated through the analysis of global developed country's specifications and reinforced as adding to the real mock-up condition if vehicle's glasses are smaller than standard specimen. Hereby, by applying to test-codes which including actual operational & vehicular conditions, the gap between development test and operational environment was minimized.

• 약학회지
• /
• 제43권5호
• /
• pp.606-613
• /
• 1999

To survey the possibility of replacing the pyrogen test with Limulus Amebocyte Lysate(LAL) test and to find out a standard methods suitable to our blood products made in Korea, 100 samples of 20% human serum albumin were tested by commercial LAL test kits and results of those were compared with rabbit pyrogen test. The LAL test is used both dinetic-chromogenically and kinetic-turbidimetrically. Both methods equally showed broad detection range (5.0~0.005 EU/ml), excellent sensitivity ($\geq$ 0.005 EU/ml) and predominant recovery rate within valid dilution range, but kinetic-turbidimetric method seemed to be more reproducible than kinetic-chromogenic method(kinetic-chromogenic method : S.D. = 15.88, kinetic-turbidimetric method : S.D. = 8.12). After heating the sample at 75$^{\circ}C$ for 15 min, the results showed a little elevated recovery rate with both methods. After performing the test on 100 albumin samples with both kits, the results were analysed using the USP standard (1.33 EU/ml). 7% of samples in kinetic-chromogenic methods and 1% of samples in kinetic-turbidimetric method exceeded the limit of endotoxin levels regulated for blood products in USA. Because this phenomenon was not observed in both methods at the same time and both methods have high sensitivity ($\geq$0.005 EU/ml), these results seemed to depend on nonspecific reaction. Considering its sensitivity and reproducibility, we could assure that LAL test is proper to detecting pyrogenic with good sensitivity.