• Journal of Sensor Science and Technology
• /
• v.22 no.6
• /
• pp.433-438
• /
• 2013

In this paper, we found surface shapes are affected by several parameters of RIE, such as RF power, pressure, temp, and process times. The reflectance of pyramid and half sphere structures show differences among shapes, size, height, and depth of those structures. We made about $1{\mu}m$ pyramid and half sphere shapes of silicon surface with RIE. For comparing the reflectance, pyramid and half sphere structures are fabricated with same height. Pyramid structure cell shows higher cell efficiency of 12.5% by 1.1% than one of half sphere structure of 11.4%. The light absorption is more increased through the pyramid structure than half sphere structure.

• Industrial Engineering and Management Systems
• /
• v.9 no.2
• /
• pp.157-164
• /
• 2010

The objective of this study is to determine the dominance effects of environmental factors such as Illuminance, humidity and Wet Bulb Globe Temperature (WBGT) on the operators' productivity at Malaysian electronic industry. A case study was carried out at an electronic components assembly factory. The environmental factors examined were the Illuminance (lux), humidity and WBGT of the surrounding workstation area. Two sets of representative data including the illuminance, humidity and WBGT level and production rate were collected during the study. The production rate data were collected through observations and survey questionnaires while the illuminance level was measured using photometer model RS 180-7133, the humidity and WBGT level were measured by using Quest Temp apparatus and humidity. Taguchi Method was utilized to find the sequence of dominant factors that contributed to the productivity of operator at that specified production workstation. The study reveals that the dominant factor contributed to the productivity was WBGT, followed by illuminance and humidity.

• Annual Conference on Human and Language Technology
• /
• 2010.10a
• /
• pp.172-176
• /
• 2010

본 논문에서는 위키피디아의 '틀(temp late)'을 기조로 하여 작성된 온톨로지인 OntoCloud의 신뢰도를 보장하고 공유 및 재사용을 가능하게 하기 위하여 또 다른 어휘집합체인 워드넷(WordNet)과의 매핑을 한다. 온톨로지 매핑 기술은 온톨로지 개발 기술의 한 방법으로, 서로 비슷한 도메인을 대상으로 이미 구축되어진 서로 다른 다수의 온롤로지를 연결시킴으로서 하나의 풍부한 정보를 가지고 있는 연결망을 구축하는 방법이다. 본 논문에서는 OntoCloud와 워드넷을 두개의 온톨로지로 정의하고 각 온톨로지의 개념에 대한 정의문 비교 방법을 통해서 두개의 온톨로지에 존재하는 유사한 개념을 연결한다. 이렇게 매핑된 정보들은 OntoCloud 개념을 워드넷 어휘로 연결함으로써 개념에 대한 직관적인 이해를 돕고, 워드넷에 연결된 다른 시소러스 (예: SUMO, CoreNet 등)와 간접적으로 연결할 수 있는 틀을 마련한다. 또한 온톨로지의 상하위 계층정보를 자동으로 보강하는 등의 OntoCloud 유지보수에 활용될 수 있다. 본 논문의 실험에서는 두개의 서로 다른 온톨로지의 정의문에 사용된 어휘의 겹침 정도로 두개의 개념의 유사성을 판별하는 방법을 보인다. 본 논문에서 제시한 방법으로 약 73%의 개념 매핑에 성공하였으나, 추후 매핑 프로세스의 전처리 과정(약자 처리 및 복합명사 대응 모듈)을 추가하고 온톨로지의 구조적 특성을 활용하여 유사 개념 자동 매핑 기술을 향상시키고자 한다.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.244-253
• /
• 2018

Recently, The ministry of Environment in korea have introduced Euro-6d temp which was strengthened at the same time as Europe. Small Light-duty passenger vehicles need the SCR system of after-treatment to meet enhanced emission regulations. However, SCR system has a low conversion efficiency in a low temperature less than 200 degree. In this study, the NOx conversion efficiency of SCR system was analyzed by installing a NOx sensors and a temperature sensors in a diesel vehicle. Also, in order to analyze the effect of the cold-start, the test was performed on the same RDE route and compared with the test of hot-start. As a result, SCR system has characteristics of low conversion efficiency under cold-start conditions.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.7-12
• /
• 2021

Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al₂O₃ coating and DLC coating were compared to find the optimal surface treatment method. Al₂O₃ coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.289-291
• /
• 1988

The ratio of trivalent to divalent copper has been determined by the redox titration for two superconducting phases of $YBa_2Cu^{3+}_{2x}Cu^{2+}_{3-2x}O_{6.5+x}$ with the onset temp. of 60K (x = 0.23 ${\pm}$ 0.01) and 90K (x = 0.35 ${\pm}$ 0.02), and for the insulating one (x ${\cong}$ 0) which was kept in an ambient atmosphere for 72 hrs. It is found that $T_c$, and the ratio of $Cu^{3+}/Cu^{2+}$ depend strongly on the annealing temperature and time. A typical orthorhombic phase can easily be obtained by a slow cooling or stepwise cooling at $PO_2$ = 1 atm, and shows a high Tc (ca. 90K) superconductivity.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.41-45
• /
• 2003

In this study, woodceramics were made from MDF with various resin impregnation rate. To investigate the change of surface temperature of woodceramics, the impregnated MDF was burned at the temp. 600, 800, 1,000, 1,200℃. Surface temperature of woodceramics was increased as impregnation rate and burning temperature was increased. The specimen burned at 800℃ was lower than others. Change of temperature under given temperature increased as time passed and it showed more increased in temperature at burning temperature of 1,200℃. Change of surface temperature increased when floor temperature increased and the temperature was 49.2℃ at 70℃ in floor temperature of 1,200℃ specimen. The decent in surface temperature of woodceramics was the fastest decrease at the burning temperature of 800℃ specimen.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.297-300
• /
• 2006

Various buildings constructed by environmentally friendly resources are being built in KOREA. Especially the building made by the wood, which has environmental characteristics that the reinforced concrete and brick doesn't have, are acknowledged with its superiority. Then, studies on indoor thermal control capability of the wooden building and influence of its indoor environment to sensory environment of occupants are not enough proceed. Thus, there were proceeded 24 hours measurements for indoor and outdoor thermal environmental elements of Log Cabins and the hourly subjective tests to evaluate indoor amenity of occupants in this study. The results of the study are following: 1) Upon evaluation on thermal environment elements, indoor and outdoor dry bulb temp were 22.0$^{\circ}C$ and -2.9$^{\circ}C$, and Indoor and outdoor average relative humidity were 25.8%and 52.7%. Differences of indoor and outdoor temperature and humidity were 24.9$^{\circ}C$ and 26.9%. 2) Upon contrastive analysis between the results of subjective tests, warm and cold sensation vote, and PMV (Predicted Mean Vote) and PPD (Predicted Percent Dissatisfaction), values of subjective tests W.9

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.962-971
• /
• 2013

In this paper, we propose a method to infer the user's behavior and situation through collected data from multi-sensor equipped with a smart clothing and it was implemented as a smart-phone App. This smart-clothes is able to monitor wearer users' health condition and activity levels through the gyro, temp and acceleration sensor. Sensed vital signs are transmitted to a bluetooth-enabled smart-phone in the smart-clothes. Thus, users are able to have real time information about their user condition, including activities level on the smart-application. User context reasoning and behavior determine is very difficult using multi-sensor depending on the measured value of the sensor varies from environmental noise. So, the reasoning and the digital filter algorithms to determine user behavior reducing noise and are required. In this paper, we used Multi-black Filter and SVM processing behavior for 3-axis value as a representative value of one.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.66.2-66.2
• /
• 2010

미니탭(Minitab) 프로그램에 있는 실험계획법(Design of experiment)를 이용하여 박막실리콘 I-layer의 주효과 및 교호작용에 대한 연구를 실시하였다. I-layer의 주요 특성은 증착속도 및 전도도에 대하여 분석을 하였으며, 최종적으로 선택된 증착조건을 사용하여 비정질 실리콘 태양전지를 제조하여 확인 하였다. 실험설계는 2수준 5인자 완전설계요인법을 사용하였다. 분석결과 단막의 증착속도에 영향을 주는 주효과로는 Power와 E/S거리고 나타났으며, Power와 E/S거리, Power와 Pressure에서 큰 교호작용이 일어남을 확인 할 수 있었다. 암전도의 영향을 주는 주효과는 Sub. Temp.를 제외하고는 모두 영향을 주고 있었으며, 상당히 복잡한 교호작용을 이루고 있어 정확한 분석을 할 수는 없었다. 광전도도의 경우도 주효과에서 SiH4 flow rate를 제외하고는 모두 영향을 주고 있었으며, 복잡한 교호작용으로 정확한 분석이 어려웠다. 따라서 P-value를 분석하여 최종 R-제곱값이 증착속도는 97%이상의 높은 값을 얻었으나 전도도의 경우 최대차수 3차항으로 70~80%정도의 낮은 값을 얻었을 수 있었다. 낮은 값을 얻은 이유로는 실험설계시 몇몇 조건이 불안정한 plasma 상태로 인하여 전도도의 측정 편차가 커 분석오차가 높았을 것으로 추정된다. 암전도를 망소특성, 광전도도를 망대특성으로 광민감도 $10^5$으로 최적화 하여 비정질 태양전지를 만들어 평가한 결과 약 9%대의 광변환 효율을 얻을 수 있었으나 만족도 40%대의 낮은 값으로 향후 이와 관련한 더 정밀한 측정 및 분석이 요구된다.