• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.1
• /
• pp.247-268
• /
• 2003

Recently, the way information is accessed has changed significantly because of the rapid growth of the Internet and a move toward electronic Publishing. With that condition, there in be a need to efficiently determine and extract relevant information from digital documents. This study has proposed that template mining can be used for extracting different kinds of information from digital documents, and described research of reference ]inking system and then built temp]ate for citation information using analysis result of sample articles. Also, this study has shown the potential of template mining to automatically create citation databases.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.3
• /
• pp.198-208
• /
• 1997

The-steady-state creep mechanism and behavior of Zircaloy-4 used as cladding materials in PWR have been investigated in air environment over the temp, ranges from 600 to $645^{\circ}C$ and stress ranges from 4 to $7kg/mm^2$. The stress exponents for the creep deformation of this alloy, n were decreased 4.81, 4.71, 4.64, and 4.56 at 600, 615, 630 and $645^{\circ}C$, respectively; the stress exponents decreased with increasing the temperature and got closer to about 5. The apparent activation energies, Q, were 62.1, 60.0, 57.9 and 55.4 kcal/mole at stresses of 4, 5, 6, $7kg/mm^2$, respectively; the activation energies decreased with increasing the stress and were close to those of volume self diffusion of Zr in Zr-Sn-Fe-Cr system. In results, it can be considered that the creep deformation for Zircaloy-4 was controlled by the dislocation climb over the ranges of this experimental conditions. Larson-Miller parameter, P, for the crept specimens was obtained as P=(T+460)(logt,+23). The failure plane observed by SEM slightly showed up intergranular fracture at this experiment ranges. However, it was essentially dominated by the dimple phenomenon, which was a characteristics of the transgranular fracture.

• International Journal of Automotive Technology
• /
• v.2 no.2
• /
• pp.63-75
• /
• 2001

This paper describes the development of THC reduction technologies compliant with SULEV regulations. Technologies embodied by the developmental work include improvement of fuel spray atomization, quick warm-up through coolant control shut of, and acceleration of fuel atomization for the fast rise of cylinder head temp inside the water jacket as well as the improvement of combustion state. The technologies likewise entail reduced HC while operating in lean A/F condition during engine warm-up with the cold lean burn technology, individual cylinder A/F control for improvement of catalytic converting efficiency, after-treatment such as thin-wall catalyst, HC-adsorber and EHC and etc, through vehicle application evaluation in cold start. We carried out an experimental as well as a practical study against SULEV regulations, and the feasibility of adopting these items in vehicle was likewise investigated.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.374-378
• /
• 2001

We investigated the change of microfloral states during drying processing and storage of dried persimmon. Initial stave of drying, a total bacteria counts of dried persimmon which was made the rural region of Sangju province were higher than that of downtown but after 7 weeks, there was no differents. A total cell count of bacteria decreased during drying processing but mold and yeast increased. In a storage test of dried persimmon at a different temprature, 3$0^{\circ}C$, room temp. 4$^{\circ}C$, respectively, low temprature storage was effectvie not only to retard the growth of microorganism but also maintain the suitable appearence.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.33-38
• /
• 2006

Current coating practice requires the thickness of anti-corrosion organic coatings to be over $250{\mu}m$ for immersion parts of ships and offshore structures and the corrosion resistance of these coatings has been evaluated by destructive and qualitative analysis. Recently, Electrochemical Impedance Spectroscopy(EIS) method has been employed, as an alternative, to evaluate corrosion resistance of organic coatings. This method is characterized as being nondestructive, reproducible, and quantitative in evaluating aging of organic coatings. In this study, EIS method was adopted to quantitatively and effectively select the coating systems having optimized protective performance. Evaluations of several epoxy and epoxy/polyurethane coating systems typically used for ships and offshore structures were carried out in wet($50^{\circ}C$, $90^{\circ}C$) and dry(room temp.) environments to accelerate the degradation of the organic coatings. These results were compared with the conventional scribed(scratched) test results. The plausible prediction model for determining the remaining life-time of coating systems was also proposed based on variations of impedance data, FT-IR and $T_g$ measurements results.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.298-310
• /
• 2011

Recently the traffics and transportation hazzards by fog are tremendously Increased. There occurred the greater traffic disaster by Dense Fog of Oct.2006. In this study frequent occurrences of advection fogs centerd over Honam Prov are investigated. Increment of transportation during the Fog period for 1996~2005(decade)are statistically analyzed with Honam Prov.'s fogs. For Honam west coast(Gunsan, Mokpo), inland of Honam(Junju, Gwangju, Suncheon), Honam south coast(Wando, Yepsu), Wind, Dew point, Diff. of air and sea temp. relative humidity are classified between 12 hours before and on time of fog with three Dimensional Analysis System(KLAPS). High frequencies of advection-radiation Fog occurrence in western Coasts except for Suncheon. The application of fog characteristics analyzed by KLAPS for denser fog over the western coast in Fall to Fog prediction and special advisory issues. The advection-radiation fog can occure favorably when the moisture index is less than $2^{\circ}C$, relative humidity is greater than 90%, but the moisture depth is under 1.5 km. In addition when the height of 925 hPa is rising, then fog occurs, but for sinking is disappearing.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.783-788
• /
• 2002

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp.:$250^{\circ}C$and conveyer speed:0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was $250^{\circ}C$. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn ($5\mu\textrm{m}$), Cu/Ni ($5\mu\textrm{m}$), and Cu/Ni/Au ($5\mu\textrm{m}/500{\AA}$) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.106-108
• /
• 2005

The instrumented fuel irradiation test at a research reactor is needed to evaluate the performance of the developed nuclear fuel. The fuel elements can be designed to measure the center line temperature of fuel pellets during the irradiation test by using temperature sensor. The thermal sensor was composed of thermocouple and sensor sheath. Micro-laser welding technology was adopted to seal between seal tube and sensor sheath with thickness of 0.15 mm. The soundness of welding area has to be confirmed to prevent fission gas of the fuel from leaking out of the element during the fuel irradiation test. In this study, fundamental data for micro-laser welding technology was proposed to seal temperature sensor sheath of the instrumented fuel element. And, micro-laser welding for dissimilar metals between sensor sheath and seal tube was characterized by investigating welding conditions. Moreover, the micro-laser welding technology is closely related to advanced industry. It is expected that the laser material processing technology will be adopted to various a pplications in the industry.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1490-1492
• /
• 1994

Diamond thin films were deposited on Si substrate from $CH_4-H_2-O_2$ system by MWPECVD at the condition of power of 800W, pressure of 80torr, $H_2$ flow rate of $75{\sim}81sccm$, $O_2$ flow rate of $0{\sim}3.8sccm$, $CH_4$ flow rate of $4.8{\sim}9sccm$, substrate temp, of $950{\sim}1010^{\circ}C$ and deposition time of 5hr. The deposited films were characterized by SEM, XRD and Raman spectroscopy. The growth rates of thin films and particles was measured. Good quality were synthesized at 40% of oxygen concentration which 6% of fixed metane concentration, and at 50%. Its deposition rates were $2.4{\mu}m/h$ respectively. As oxygen concentration increased, it was known that the broad peak of $1350 cm^{-1}$ was shifted to $1332cm^{-1}$ due to etching of carbon component.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.161-167
• /
• 2009

The bifunctional Xylanase-Cellulase hybrid protein was constructed by gene fusion. Two genes corresponding to endoxylanase gene (xylS) and endocellulase gene (celA) were amplified by PCR from Bacillus licleniformis NBL420. It was then linked through splicing by overlap extension (SOE) by PCR method. The two resulting fused hybrids, xyl/cel and cel/xyl, which differ by its orientation, were confirmed by its nucleotide sequencings. One of two fusion genes, xyl/cel was successfully expressed into pET22b(+) vector (pxyl/cel) with bifunctional xylanase-cellulase activity. On the contrary, the other cel/xyl fusion protein showed only cellulase activity with much decreased xylanase activity. Enzymatic properties of Xyl/Cel fusion protein were investigated regarding optimum pH, optimum temp, thermostability, and pH stability. It was revealed that Xyl/Cel fusion protein retained the bifunctional xylanase-cellulase activities eventhough two enzymes were connected with each other directly. These informations could be useful for construction of other hybrid proteins as well as increased range of substrate utilization.