• Applied Microscopy
• /
• v.42 no.1
• /
• pp.49-52
• /
• 2012

For TEM study of biological samples or polymers that are contained in organic structure, it is often required that the sample is prepared by using ultramicrotome and stained with proper agents to increase the contrast of organic structure. In this study, we investigated an efficient TEM sample preparation method for ductile heterogeneity material by using ultramicrotomy. Cryo-ultramicrotomy is a suitable method that is capable of rendering sample hardness for various ductile materials. However, it has several factors to consider, such as experimental cost, working time and finding the optimal staining conditions. To satisfy these considerations, we prepared TEM sample by using ultramicrotome without cryofunction, and secured the sample hardness by applying the staining process prior to ultrathin sectioning. The cross-linked polyethylene structure in the sample was stained with the 2% $RuO_4$ solution in a sealed test tube for 24 hours at $4^{\circ}C$. After the sample staining, ultrathin sections of sample were prepared using ultramicrotome. As a result, it was revealed that the difficulties associated with staining of ultrathin sections prepared by low-temperature conditions were improved. In addition, appropriate staining depth of sample could be selected for sectioning process. The quality of TEM sample obtained by using this method was better than that of cryo-ultramicroscopy. Finally, it is expected that our method could be effectively applied in TEM sample preparation for a variety of nano-bio convergence materials.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.886-889
• /
• 1997

The crystal structure and optical properties of copper nanoparticles, prepared in fused silica by ion-implantation and subsequent heat-treatment, were characterized by X-ray, TEM, linear absorption, and degenerate four-wave mixing (DFWM) technique. The X-ray data show fcc lattice structure of the nanocrystals and their size was measured as 8-20 nanometer by high resolution TEM. Using DFWM, the third-order nonlinear optical coefficient of the Cu-SiO2 thin films was measured as 0.4-1.1×10-8 esu in the surface plasmon resonance absorption region (540-570 nm).

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.658-663
• /
• 2007

Bacillus thuringiensis is a well-known species of entomophathogenic bacteria that is widely used as a biopesticide against many insect pests. It produces parasporal crystals ($\delta$-endotoxin) and endospores during sporulation. In this report, the $\delta$-endotoxin produced by Bacillus thuringiensis BT-1 and BT-2 were characterized by Scanning Electron Microscope(SEM), Transmission Electron Microscope(TEM), SDS-PACE, and solubilization activity by alkaline solution. BT-1, BT-2 were cultured in the GBY medium, and the $\delta$-endotoxin of them was purified with discontinuous sucrose density gradient centrifugation. Their $\delta$-endotoxin was observed by SEM and TEM. Morphologically, the $\delta$-endotoxin of BT-1 was a square and flat type, whose size was $1.73{\mu}m{\times}0.7{\mu}m$, and the $\delta$-endotoxin of the BT-2 was spherical form whose size was $1.1{\mu}m{\times}0.9{\mu}m$ determined by SEM and TEM. The $\delta$-endotoxin of the BT-1 was composed of 28 kDa and 21 kDa, however, it of the BT-2 was composed of 50 kDa, 35 kDa, and 22 kDa bands determined by SDS-PACE. The purified crystals of BT-1 and BT-2 were dissolved gradually in alkaline solution as time goes by, and it was perfectly dissolved after 3 hours. It is supposed that the $\delta$-endotoxin of crystal was converted to a state of activation in the course of time in the intestines of insect.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2193-2198
• /
• 2011

We prepared polycatenar 1H-imidazole amphiphiles having a structure in which a 1H-imidazole head was connected through a benzene ring to a pheny group having two or three oligo(ethylene glycol) chains and studied their supramolecular assembly by fluorescence spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM). When the aqueous solutions of the amphiphiles ($5{\times}10^{-5}M{\sim}10^{-3}M$) were deposited onto a carbon-coated copper grid and dried, twisted structures with diameters of ~200-300 nm were imaged by TEM and AFM. We presume that the structures comprised a chain of the amphiphile dimers formed via successive hydrogen bonding between the 1H of the imidazole group and 3N of the neighboring one. In a solution of pH 4, entangled fibers with diameters of several nanometers were observed by TEM. In a pH 10 solution, film-like aggregates formed exclusively. The 1H-imidazole amphiphiles hydrolyzed tetraethoxysilane to induce gelation to form fibrous and spherical silica structures at neutral pH in aqueous solutions. No silica was formed when imidazole was used instead of the amphiphiles, suggesting that the selfassembled aggregates of the amphiphiles were responsible for the gelation.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.124-131
• /
• 1995

High resolution transmission electron microscopic observations on the $Hg_{1-x}\;Tl_{x}\;Ba_{2}(Ca_{0.86}\;Sr_{0.14})_{2}\;Cu_{3}\;O_{8+\delta}$(x=0.00, 0.25, 0.50, 0.75) were carried out using side-entry type TEM working at 300 kV. The TEM samples are prepared by powder method. The pellets are crushed in agatar motar and suspended in $CCl_4$, solution and scooped in holely carbon microgrid. The 1223 structures are observed in all samples with [010] zone axis. Except x=0.25 sample, the lattice parameter a and c tend to decrease as the thallium contents are increased ranging from 0.3936 nm to 0.3713 nm for a, and from 1.6131 nm to 1.5138 nm for c parameter. Those of x=0.25 sample are reduced too much, 0.3785 nm for a, 1.5375 nm for c. The sample with x=0.25 shows the intergrowth of 1223 and 1234 structure with the ratio of 19 to 1. As the thallium content increases, the structures become more stable without having any defect. The samples are damaged by electron beam irradiation during the observation, however the structure can endure longer as the thallium contents are increased.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.15-23
• /
• 2014

There have been CFIT(Controlled Flight Into Terrain) accidents that can be prevented if the crew executed go-around. This study is to analyse the common factors of three typical CFIT accidents of Korea in TEM(threat and error management) frame, and the examples of go-around gate and the countermeasures of eight airlines through the survey facilitating go-around to prevent CFIT. The common factors found in three typical CFIT accidents occurred in Korea or by Korean carriers turned out to be in mountainous terrain, in bad weather while in non-precision approach or circling approach by captain as PF(Pilot Flying) when crew make monitoring errors and communication errors. It also turned out that the crew in all three typical tragic CFIT accidents did not execute go-around in unstabilized approaches. The captains did not respond immediately when first officers advised them to go-around until it is too late. Seven out of eight Airlines answered that they use stabilized approach height as 1,000 feet to be stabilized earlier to have more safety margin by enhancing go-around gate regardless of the weather to prevent CFIT in the survey.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.399-406
• /
• 2000

A thermotropic liquid crystalline polymer (TLCP) containing a flexible spacer was synthesized from hydroquinone, p-hydrofybenzoic acid, and 1,6-dibromohexane. Intercalation of TLCP in layered clays is accomplished by heating the polymer with dodecyl ammonium-montmorillonite (C$_{12}$-MMT) above melt transition temperature (T$_{m}$). Liquid crystallinity of the TLCP/C$_{12}$-MMT hybrid was not observed when $C_{12}$-MMT content was above 1 wt%. Some of the $C_{12}$-MMTs in TLCP were highly dispersed in a nanometer scale, but some of them were agglomerated. Thermal and morphological properties of the nanocomposites were examined by differential scanning calorimetry (DSC), thermogravimetric analyzer (TGA), polarized optical microscope, and electron microscopes (SEM and TEM). TEM).

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.282-288
• /
• 1997

To obtain a basic information on the development of Genus Viola, ultrastructure and electrofusion process between the two protoplasts from wild Viola callus cells and pansy mesophyll cells were observed with a scanning electron microscopy(SEM) and transmission electron microscopy(TEM). In the ultrastructural observation of wild viola callus protoplasts and pansy mesophyll protoplasts using SEM, their cell walls were removed completely. A knob-like formation was observed on the enlarge surface of viola callus protoplasts. On the surface of pansy mesophyll protoplasts net-like chloroplasts were observed. In SEM observation of pansy mesophyll protoplasts, chloroplasts devoid of membrane were observed on the surface the protoplasts. Pearl chain was formed by applying AC field of 200 V/cm at 1.0 MHz for 43 sec. The lysis of plasma membranes and fusion process occurred by applying a 1,600 V/cm DC pulse twice for 1 sec. After 1-2 hours of a DC pulse application, it was observed that the two protoplasts were fused completely into one cell. In TEM observation of the fused cell, many small vacuoles were located in the fusion area of the two protoplasts. Indeed, two distinct regions were observed during fusing process; in one region, a nucleus was found, while in the other region, both nucleus and nucleous were found.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.72-81
• /
• 2015

Objectives: The aim of this study was to investigate the exposure and risk assessment of residents near asbestos mines in Korea. Methods: To assess asbestos types and airborne concentrations, air monitoring was performed in the neighborhoods of Kwangcheon (KC) and Sinsuk (SS) mines, which were leading South Korean mines in the past. In addition, activity-based-sampling (ABS) of residents' particular activities were conducted in order to estimate the Excess Lifetime Cancer Risks (ELCRs) for the residents. Conclusions: The average concentration of airborne asbestos in KC was 0.0014 f/cc and 0.0015 f/cc by PCM and TEM, respectively. In SS it was equal at 0.0012 f/cc by PCM and TEM. No statistically significant difference was found in the average concentration of airborne asbestos between the two mines. The average asbestos concentration of ABS was 0.0048 f/cc (PCM) and 0.0042 f/cc (TEM) in KC, while it was 0.0137 f/cc (PCM) and 0.0125 f/cc (TEM) in SS. It was found that the average asbestos concentration of ABS in SS was statistically significantly higher than that of KC (p<0.01). The results of ELCRs by scenario in KC showed that the scenarios of bicycle, car, weed control, weed whacking, child playing in the dirt, and physical training fell within $1{\times}0^{-6}-1{\times}10^{-4}$, which is the acceptable range of ELCR. The scenarios of motorcycle, walker, digging, and field sweeping, however, exceeded the acceptable range. In SS, only the scenario of car fell within the acceptable range, while all of the other scenarios exceeded the acceptable range.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.209-215
• /
• 1997

Aluminum nitride(AIN) thin films were deposited by reactive single ion beam sputtering using N2 or NH3 as reactive gas. The structural, compositional and optical properties of AIN thin films were characterized by XRD, GAXRD, TEM, SEM, XPS UV/VIS spectrophotometer, and FT-IR. All the deposited AIN thin films were amorphous by the analysis fo XRD and GAXRD. However, TEM analysis showed that AIN nano-crystallites were uniformly distributed in the films. The presence of Al-N bonds were also confirmed by FT-IR and XPS analyses. The optical bandgap of AIN films increased up to 6.2 eV and the transmittance was a-bout 100% in visible range with approaching the stoichimetric composition. Irrespective of using N2 or NH3 as reactive gas, the deposited AIN thin films had very smooth surface morphologies. Their refractive index ranged from 1.6 to 1.7.