• Applied Microscopy
• /
• v.38 no.1
• /
• pp.51-61
• /
• 2008

This simulation study examined the effect of data acquisition error including the data type of TEM image, and incident beam intensity of the tilt series on 3D tomograms. Simulation was performed with the 3D head phantom model of Kak and Slaney, and the slightly modified 3D head phantom model with enhanced difference in absorption coefficients. Reconstructed tomogram for the original head phantom model using 8-bit gray-scale image was distorted with extremely high level of noise, while an acceptable result was obtained for the modified model. The results for the original model using wrong formulation for the transmitted beam intensity was proved to be incorrect. The high level of noise along the z direction was found in case of the modified model. On the other hand, the wrong value of incident beam intensity in both models gave distorted results. In order to reconstruct an artifacts-free 3D structure from the projections with invisible features in electron tomography, the 16-bit projection images should be used with the correct incident beam intensity which is applied to Beer's law.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.148-148
• /
• 1999

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic Boron Nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 자료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 이러한 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 증착직후 급격한 박리현상을 보이는 c-BN 박막의 밀착력문제때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용하여 c-BN 박막을 합성하고, 합성된 c-BN 박막의 밀착력에 미치는 공정인자의 영향을 규명하여, 급격한 박리현상을 보이는 c-BN 박막의 밀착력 향상을 위한 최적 공정을 도출하고자 하였다. BN 박막 합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(activated reactive evaporation)에 의해 이루어졌다. 기존의 ARE장치와 달리 열음극(hot cathode)과 양극(anode)사이에 평행자기장을 부여하여 플라즈마를 증대시켜 반응효율을 높혔다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40 mm크기로 절단 후, 100%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한후 사용하였다. c-BN 박막을 얻기 위한 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N가스유량비이었다. 증착공정 인자들을 변화시켜 다양한 조건에서 c-BN 박막의 합성하여 밀착력 변화를 조사하였다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, Bn 박막의 상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 증착된 c-BN 박막은 3~10 GPa의 큰 잔류응력으로 인해 증착직후 급격한 박리현상을 보였다. 이의 개선을 위해 증착중 기판바이어스 제어 및 후열처리를 통해 밀착력을 수~수백배 향상시킬 수 있었다. c-BN 박막의 합성을 위해서는 증착중인 박막표면으로 큰 에너지를 갖는 이온의 충돌이 필요하기 때문에 기판 바이어스가 요구되는데, c-BN의 합성단계를 핵생성 단계와 성장 단계로 구분하여 인가한 기판바이어스를 달리하였다. 이 결과 그림 1에서 나타낸 것처럼 c-BN 박막의 핵생성에 필요한 기판바이어스의 50% 정도만을 인가하였을 때 잔류응력은 크게 경감되었으며, 밀착력이 크게 향상되었다.

• Journal of agricultural medicine and community health
• /
• v.16 no.2
• /
• pp.154-164
• /
• 1991

Albendazole is a broad spectrum anthelmintics with high activity against intestinal nematodes as well as tremtodes and cestodes infections. But so far wormicidal effect of albendazole against Paragonimus westermani is uncertain. The present study undertaken to observe the morphological changes of Paragonimus westermani which was obtained from experimentally infected with metacercariae isolated from Cambaroides similis and 9 of them were given albendazole 2 doses of 25mg/kg daily for the 2 days and 4 days from the day of 20 weeks after infection. The Paragonimus werms were collected from the lung of the cats which were autopsied at 24 hours after treatment. The fine structures of the collected worms were studied by means of scanning and transmission electron microscopy. The findings of the observations were compared with those of untreated worms. The results are as follows : 1) In the scanning electron microscopic(SEM) observations, the worms obtained from 2 days treated group showed many blebs which were formed on the surface of damaged tegument in between two suckers. Protrusion of oral sucker typically observed and surrounding tegumental ridges were damaged. 2) The worms obtained from 4 days treated group showed marked contraction revealing half size of normal worms. 3) The transmission electronmicroscopic(TEM) observations indicated that large blebs of irregular shapes were formed by the destruction of tegumental ridge of tegumental syncytium and also showed degeneration of mitochondriae. 4) Destruction of tegumental syncytium formation of blebs were usually observed in the ventral side of the worms. 5) Differentiation of tegumental layer and basement layer muscular layer and parenchymal layer around two suckers of worms obtained at 4 days treated group was difficult. 6) Many host cells invaded and destroyed the degenerated tegument by the occurrence of blebs or the exposed muscular layer of the worm after exfoliation of the tegument.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.839-844
• /
• 2008

$TiO_2$ is an environment-friendly semiconducting material, and it has photocatalytic and hydrophilic effect. There are a lot of reports on the photocatalytic characteristics of $TiO_2$, such as organic pollutants resolving, anti-bacterial, and self-purification material. In this paper, $TiO_2$ micron-sized powders were deposited on the glass by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $TiO_2$ photocatalytic thin films were fabricated. The thickness of the films were controlled by changing the number of deposition cycle. Morphologies and characteristics of the AD-$TiO_2$ thin films were examined by SEM, TEM, XRD, and UV-Visible Spectrophotometer. As the thickness of $TiO_2$ films increased, surface roughness increased. By this increment, the reaction area between film and pollutant was enlarged, resulting in better photocatalytic property.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.312-316
• /
• 2006

A optimal condition for the Ginkgo biloba extraction in ethanol and water binary solvent system has been proposed based on concentration of bilobalide and ginkgolide known as having a antimicrobial components in the range 5% to 70% ethanol in water at $80^{\circ}C$. Concentration of bilobalide as a single component of Ginkgo biloba leaves extract is the highest at the 60% ethanol and ginkgolide A and B is highest at 50% ethanol. Antimicrobial effect of Ginkgo biloba leaves extracts on the S. aureus was also examined by disc diffusion test and optical density test. In case of the disc diffusion test, the clean zone diameter was increased from 0.95 cm to 1.70 cm as ethanol concentration increased from 5 to 70%. However, over the 40% of ethanol concentration the antimicrobial effect was almost flat. Based on these results, we propose that the 40% of ethanol and 60% water solvent is most desirable for Ginkgo biloba extract considering vapor pressure problem in concentrating process after extraction. We introduced SEM and TEM to figure out the morphological change on the surface and inside body of S. aureus when Ginkgo biloba leaves extract was treated. After mixed with Ginkgo biloba leaves extract blast like blebs appeared on the surface of S. aureus cells and cell wall was not observed. From the these results, it seems that the Ginkgo biloba leaves extract including bilobalide and ginkgolide A, B prevent cell wall synthesis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6039-6046
• /
• 2015

Aims: To investigate effect of metallic nanoparticles, silver (AgNPs) and gold nanoparticles (AuNPs) as antitumor treatment in vitro against human breast cancer cells (MCF-7) and their associated mechanisms. This could provide new class of engineered nanoparticles with desired physicochemical properties and may present newer approaches for therapeutic modalities to breast cancer in women. Materials and Methods: A human breast cancer cell line (MCF-7) was used as a model of cells. Metallic nanoparticles were characterized using UV-visible spectra and transmission electron microscopy (TEM). Cytotoxic effects of metallic nanoparticles on MCF-7 cells were followed by colorimetric SRB cell viability assays, microscopy, and cellular uptake. Nature of cell death was further investigated by DNA analysis and flow cytometry. Results: Treatment of MCF-7 with different concentrations of 5-10nm diameter of AgNPs inhibited cell viability in a dose-dependent manner, with IC50 value of $6.28{\mu}M$, whereas treatment of MCF-7 with different concentrations of 13-15nm diameter of AuNPs inhibited cell viability in a dose-dependent manner, with IC50 value of $14.48{\mu}M$. Treatment of cells with a IC50 concentration of AgNPs generated progressive accumulation of cells in the S phase of the cell cycle and prevented entry into the M phase. The treatment of cells with IC50 concentrations of AuNPs similarly generated progressive accumulation of cells in sub-G1 and S phase, and inhibited the entrance of cells into the M phase of the cell cycle. DNA fragmentation, as demonstrated by electrophoresis, indicated induction of apoptosis. Conclusions: Our engineered silver nanoparticles effectively inhibit the proliferation of human breast carcinoma cell line MCF-7 in vitro at high concentration ($1000{\mu}M$) through apoptotic mechanisms, and may be a beneficial agent against human carcinoma but further detailed study is still needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.381-386
• /
• 1985

This experiment was conducted to investigate changes of soybean curd yield according to the extension of soaking time during manufacturing of soybean curd. To investigate those changes systematically, transmission electron microscopy and disc-gel electrophoresis were used. The soybean curd yield was increased from 45.0% to 50.5% and 55.4% respectively as soaking time is extended from 5 hours to 10 and 24 hours. The solid extraction and soybean milk coagulation were also increased according to the extension of soaking time. From disc-gel electrophoresis patterns of soybean milk protein and soybean curd protein, numbers of band were increased and major band thickened by expending the soaking time. Most of high molecular bands of soybean milk protein were transfered to soybean curd. Crude 7S proteins of soybean milk and soybean curd in dis-gel electrophoresis were appeared to be 4 and 5 bands respectively, and crude 11S proteins of soybean milk and soybean curd were appeared to be 9 and 8 bands respectively. Of soybean milk bands, most of 11S component transfered to soybean curd. Transmission electron photomicrographs revealed that the dimension of each protein body became larger and the numbers of spherosome around the protein bodies in unit area fewer by extending the soaking time of soybean.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.4
• /
• pp.316-333
• /
• 1998

Obstructive sialadenitis of major salivary glands is a common entity that occurs either in sialolithiasis or in foreign-body obstruction of the excretory ducts. This is characterized histologically by the presence of duct-like structural groups in a highly fibrotic stroma. Although the pathologic features are well recognized, the various cell types involved in the atrophy and subsequent regeneration of the obstructed salivary gland have been controversial. For this reason, an animal model of obstructive sialadenitis that induced atrophy in the salivary gland was used. Experimental study was performed to observe changes of submandibular gland in rabbit and apply the results to clinical activity. Forty-five rabbits each weighing about 3Kg were used and divided into control and experimental group. In the experimental group, ducts of submandibular gland was ligated and cutted divided into each twenty rabbits. Rabbits were serially sacrificed on the 3rd, 5th, 14th, 30th day of experiment. The submandibular glands were dissected out at sacrifice and stained with H&E, MT, immunohistochemical stain and the histological examinations were carried out under the light and transmission electron microscope. After examination and comparison of all specimens, the results of this study were as follows: 1. In the features of H&E stain, moderate infiltration of inflammatory cell were present at 3rd day of experiment. The features of ductal metaplasia was observed after 7th day in the ligation group and destructive changes was continued. In the cutting group, atrophic changes were less severe than ligation group but the small ductule were separated from stroma after 7th day. 2. In the feature of MT stain, apposition of connective tissue was increased in all group, more active in ligation group. 3. In the features of immunohistochemical stain, ligation group showed increased PCNA positive response at 7th day and the higher activity of duct cells was observed. Severance group showed more PCNA positive response than ligation group at 30th day. 4. In TEM features, ductal metaplasia was started at 7th day and degenerative change with margination of nucleus had been severe. Although ductal metaplasia was seen in the severance group, more numerous granule in different size was founded than ligation group. From above results, degenerative change was identified with ductal metaplasia, apically apposition of granule, r-ER destruction in ligation group. Severance of duct elicit degenerative change of grandular cells but the change was less severe than ligation group and more PCNA positive cell was founded at acinar cell.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.569-575
• /
• 2020

Recently, research on renewable energy technologies has come into the spotlight due to rising concerns over the depletion of fossil fuels and greenhouse gas emissions. Demand for portable electronic and wearable devices is increasing, and electronic devices are becoming smaller. Energy harvesting is a technology for overcoming limitations such as battery size and usage time. In this paper, the V-I characteristic curve and internal resistance of thermal electric devices were analyzed, and MPPT control methods were compared. The Perturbation and Observation (P&O) control method is economically inefficient because two sensors are required to measure the voltage and current of a Thermoelectric Generator(TEG). Therefore, this paper proposes a new MPPT control method that tracks MPP using only one sensor for the regulation of the output voltage. The proposed MPPT control method uses the relationship between the output voltage of the load and the duty ratio. Control is done by periodically sampling the output voltage of the DC-DC converter to increase or decrease the duty ratio to find the optimal duty ratio and maintain the MPP. A DC-DC converter was designed using a cascaded boost-buck converter, which has a two-switch topology. The proposed MPPT control method was verified by simulations using PSIM, and the results show that a voltage, current, and power of V=4.2 V, I=2.5 A, and P=10.5 W were obtained at the MPP from the V-I characteristic curve of the TEG.