• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.748-755
• /
• 2004

본 논문에서는 나카가미-m 다중 경로 페이딩 환경에서 MC/DS-CDMA 시스템에 하이브리드 SC/MRC 기법을 적용하여 MRC 기법이 적용된 경우와 비교, 분석하였다. 분석결과. 각 반송파의 입력 다이버시티 가지 수(L)가 3이고 선택된 가지 수( Lc)가 2인 경우 Lc=2 일 때의 MRC 기법보다는 성능이 우수하지만 Lc=3일 때의 MRC 기법을 적용한 경우보다는 성능이 떨어짐을 알 수 있었다. 그러나. 페이딩 지수가 낮을 경우 즉, 환경이 열악해질수록 Lc=3일 때의 MRC 기법과 하이브리드 SC/MRC-(2/3) 다이버시티 기법의 성능이 거의 같음을 확인 할 수 있었고 Lc=4일 때의 MRC 기법과 하이브리드 SC/MRC-(2/4) 다이버시티 기법인 경우도 유사한 성능을 가짐을 확인하였다. 따라서 MC/DS-CDMA 시스템에서 모든 다이버시티 가지에 대해 비트 동기 및 페이딩 진폭, 위상동기를 요구하는 MRC 다이버시티 기법보다는 이를 필요로 하지 않는 SC기법의 장점과 성능이 우수한 MRC 기법의 장점을 이용한 하이브리드 SC/MRC 기법을 적용함으로써 복잡도는 줄이면서 MRC 기법을 사용한 경우의 성능에 근접함을 확인하였다.

• 한국물환경학회지
• /
• 제33권3호
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.425-430
• /
• 1995

핵자기 공명 뇌기능 영상에서 상관관계를 이용한 데이터 해석기법이 많이 사용되고 있다. 이 논문에서 새롭게 제안된 CLT 기법은 상관관계(CCT)를 이용한 기법을 변화시켜서, 이 CCT기법의 단점을 보완하고자 하였다. CLT기법은 다음의 두 단계로 이루어진다. 첫째, 잡음을 포함한 CCT기법의 상관계수결과로 부터 잡음은 제거하고 실제 자극반응 픽셀들은 추출한다. 둘째, 이산적인 분포를 가지는 반응 픽셀들을 두 가지의 선별법으로 군집을 이루도록 한다. 이 CLT기법을 이용해서 실제 자극에 반응하는 픽셀들은 서로 모이게 하였고, 잡음에 기인한 오류의 픽셀들은 제거 되어질 수 있었다. 본 논문에서 제안된 CLT기법은 기존의 다른 기법에 비해 여러 잇점이 있고, 특히 잡음에 강한 특성이 있다.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.245-252
• /
• 2022

Objective: This study aimed to investigate the abdominal muscle activity difference while performing the abdominal bracing technique focusing on inspiration (abdominal bracing group), the general abdominal bracing technique (general bracing group), and the abdominal hollowing technique (abdominal hallowing group) Design: A cross-sectional study design. Methods: Thirty-three healthy participants were recruited for this study. The participants were allocated to 3 different groups; Abdominal bracing group, general bracing group, and abdominal hallowing group. The surface electromyography was placed over the rectus abdominis, external oblique, and internal oblique muscles to collect the activation of abdominal muscles during the trial. Results: The muscle activity of the abdominal bracing group and general bracing groups was significantly higher in all abdominal muscles than in the abdominal hollowing group (p<0.05) Both rectus abdominis and external oblique muscles showed higher muscle activations in the abdominal bracing group over the general bracing group (p<0.05). However, the ratio of bilateral external obliques and rectus abdominis to bilateral internal obliques was highest when the hollowing technique was applied (p<0.05). Conclusions: The results of study showed the abdominal bracing technique that emphasized inhalation rather than the abdominal hollowing technique or general abdominal bracing technique increased the activity of the abdominal muscles. Therefore, this study is considered to be a data for effective training if the abdominal bracing technique that emphasizes inhalation is applied as a method to increase the activation of the abdominal muscles.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.113-120
• /
• 2000

This study has developed a new liquid crystal calibration technique using Neural networks with median filtering and applied this technique to heat transfer measurements. To verify the validity of this new measurement technique, the local Nusselt numbers on a flat plate surface subjected to an axisymmetric impinging jet were measured and compared with the results by the conventional Hue-temperature calibration technique under the same conditions. Because the Neural networks predict the non-linear relations between temperatures and corresponding R, G, B values, Neural networks-median filtering calibration technique can utilize a much wider color band in the experiment than the Hue-temperature calibration technique, resulting in a significant reduction in the experimental time.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• 대한물리의학회지
• /
• 제8권3호
• /
• pp.433-441
• /
• 2013

PURPOSE: The purpose of this study was to determine the effectiveness of three PNF stretching techniques for improving hamstring flexibility and to compare the effectiveness of three PNF stretching techniques(direct and indirect and mix(direct&indirect) of hold-relax technique). METHODS: The subjects were randomly assigned into three groups: group1-direct-hold-relax technique(n=10); group2-indirect-hold-relax technique(n=8); group3-mix(direct&indirect)-hold-relax technique(n=10). For each group, stretch was performed three times a week for a period of three weeks. Hamstring flexibility for each group was measured using the ASLR and PSLR. RESULTS: The results showed significant improvement in hamstring flexibility for all subjects of three groups. However, were not significantly different between the three groups. CONCLUSION: In conclusion, three PNF stretching techniques are confirmed to be useful for improving hamstring flexibility. The choice for a qualified technique has to be made individually according to patient and therapist.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.9-14
• /
• 2006

Averaged heat transfer coefficients in the trailing edge model of a turbine blade with double impingements were measured using transient liquid crystals technique and conventional copper plate-thermocouple technique. The detailed distributions of heat transfer coefficients by transient liquid crystals technique were also presented. Results showed that increased heat transfer coefficient due to the inpingements and the averaged heat transfer coefficients increased as Reynolds number increased. Results by transient liquid crystals technique showed that the heat transfer coefficient strongly depended on the main stream temperature used in heat transfer coefficient calculation. The averaged heat transfer coefficients measured by different methods showed similar trend as Reynolds number changed, but the value varied up to 40% depending on the measurement technique.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.180-185
• /
• 2000

In this paper, a local remeshing technique assisted by flexible user-interface capabilities is presented for precise forging simulation. The rigid-plastic finite element formulation is introduced and the detailed approach to the new local remeshing technique is given. A piercing process in cold forging is simulated by the presented technique and the simulated results are compared with those obtained by the technique and the simulated results are compared with those obtained by the conventional approach and experiments. A typical application example is also given, which emphasizes the capability of the local remeshing technique in forging simulation.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1633-1637
• /
• 2009

We propose a new technique for sidelobe suppression in orthogonal frequency division multiplexing (OFDM) systems. Sidelobe suppression is an essential technique to design OFDM based overlay system. The proposed technique is based on the combination of the multiple choice sequence (MCS) with the conventional windowing of OFDM signal in time domain. The MCS is choosing the one sequence which has lowest power in sidelobes from the produced set of sequences. The main advantage of proposed technique is that it fully utilizes the available bandwidth to transmit data. Simulation results show that by combining MCS with conventional windowing technique, the sidelobes in OFDM system can be significantly reduced