• 센서학회지
• /
• 제13권2호
• /
• pp.128-132
• /
• 2004

Short wave infrared (SWIR) photovoltaic devices have been fabricated from metal organic vapour phase epitaxy (MOVPE) grown n- on p- HgCdTe films on GaAs substrates. The MOVPE grown films were processed into mesa type discrete devices with wet chemical etching employed for meas delineation and ZnS surface passivatlon. ZnS was thermally evaporated from effusion cell in an ultra high vacuum (UHV) chamber. The main features of the ZnS deposited from effusion cell in UHV chamber are low fixed surface charge density, and small hysteresis. It was found that a negative flat band voltage with -0.6 V has been obtained for Metal Insulator Semiconductor (MIS) capacitor which was evaporated at $910^{\circ}C$ for 90 min. Current-Voltage (I-V) and temperature dependence of the I-V characteristics were measured in the temperature range 80 - 300 K. The Zero bias dynamic resistance-area product ($R_{0}A$) was about $7500{\Omega}-cm^{2}$ at room temperature. The physical mechanisms that dominate dark current properties in the HgCdTe photodiodes are examined by the dependence of the $R_{0}A$ product upon reciprocal temperature. From theoretical considerations and known current expressions for thermal and tunnelling process, the device is shown to be diffusion limited up to 180 K and g-r limited at temperature below this.

• 대한전자공학회논문지TE
• /
• 제42권2호
• /
• pp.23-28
• /
• 2005

본 논문에서는 밀리미터파 대역의 주파수를 실시간으로 이루어지는 차량간 통신시스템에 적용하기 위해 전파경로 분석과 전파경로손실 예측 모델을 제안하였다. 다중경로에 의한 반사파의 영향을 분석하기 위해 차량정체가 많은 대도시 지역 편도 2차선의 도로에서 차량과 차량 사이에 통신이 이루어지는 경우를 가정하였다. 제안모델의 시뮬레이션 결과, 전파직선경로 100[m]를 진행하는 동안 반사파에 의한 전파경로는 직접파에 비해 0.1[m]$\sim$5.1[m]정도 더 길었다. 또한 전파경로 손실을 비교한 결과 벽면에 의한 반사의 경우 -0.8[dB]$\sim$-4.2[dB], 차량에 의한 반사의 경우 -0.8[dB]$\sim$-1[dB] 정도 더 손실이 커짐을 알 수 있었다. 이상의 결과 벽면에 의해 발생한 반사파의 경로손실이 인접 차량에 의해 발생한 경로 손실 보다 -3.2[dB] 정도 더 큼을 알 수 있었다.

• 한국광학회지
• /
• 제15권6호
• /
• pp.547-554
• /
• 2004

z-축 방향으로 진행하는 Ti:LiNbO$_3$, 광도파로와 전기광학효과를 이용하여 집적광학형 편광조절기를 구현하였다. 소자는 λ/4-λ/2-λ/4 wave-plate들로 구성되었으며, 각 wave-plate에 인가되는 전압들에 따라 나타나는 위상변화량과 이에 대응되는 편광모드 변환을 정량적으로 검토하고, 폴래리미터 (polarimeter)와 Poincare 구 좌표계를 이용하여 편광 조절기의 동작 상태를 체계적으로 측정하였다. 제작된 편광조절기는 각 wave-plate들의 선택과 인가전압에 따라 어떠한 입력 편광 상태도 특정한 출력 편광상태로 변화시킬 수 있음을 확인하였다.

• International Journal of Contents
• /
• 제7권4호
• /
• pp.44-49
• /
• 2011

The scattering solutions for multiple rectangular metallic gratings in a perfectly conducting plane excited by the TE and TM delta sources are presented using an overlapping T-block method. A reflectarray composed of rectangular metallic gratings shows fanbeam radiation patterns that are useful for an electromagnetic fence. The scattering characteristics of multiple rectangular gratings were computed in terms of total radiated power and antenna directivity. The design method of a fan-beam reflectarray to obtain high directivity was also compared with superdirective radiation and parabolic reflector phase.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.319-320
• /
• 2007

We report on the fabrication of two-dimensional Silicon On Insulator (SOI) photonic crystal (PhC) superprism. To optimize the design of 2-D SOI PhC superprism, the photonic band structures (TE-polarization) for triangular lattices and the dispersion surfaces were calculated and analyzed by the plane wave expansion method. Dense 2-D SOI PhC superprism nanostructures with taper input and output waveguide microstructures were successfully fabricated by nanoimprint lithography, followed by inductively coupled plasma (ICP) etching.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.398-400
• /
• 1987

Using the transmission line model, we have developed a formalism which is fairly accurate and convenient for analyzing the dispersion characteristics of rectangular dielectric waveguides for integrated optics. The fields in open half space regions are expressed as a Fourier integral form. Including all the TE and TM polarized discrete modes in slab waveguide region, our calculation shows that the discrepancies between the previous vectorial wave analysis using one discrete mode and the brute-force numerical analysis for the rectangular dielectric waveguides can be fully reduced with this method.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.247-249
• /
• 2004

본 논문에서는 격자구조의 유전체에 수직으로 입사된 전자기파의 산란, 투과 특성을 얇은 위상 막 근사화 이론을 이용하여 분석하였다. 위상 막 근사화 이론은 격자구조가 입사되는 전자기파의 위상 변화만을 주는 것으로 간주하는 것으로 이를 이용하여 격자구조를 통과한 직후인 근거리 필드 분포를 TE 모드에서 계산하였다. 기존의 제시된 이론에 비해 비교적 간단하고 빠르게 산란 필드를 분석할 수 있다.

• 천문학회보
• /
• 제40권2호
• /
• pp.38.1-38.1
• /
• 2015

Supernova remnants (SNRs) are one of the most energetic astrophysical events and are thought to be the dominant source of Galactic cosmic rays (CRs). A recent report on observations of gamma rays from the vicinity of SNRs have shown strong evidence that Galactic CR protons are accelerated by the shock waves of the SNRs. The actual gamma-ray emission from pion decay should depend on the diffusion of CRs in the interstellar medium. In order to quantitatively analyze the diffusion of high-energy CRs from acceleration sites, we have performed test particle numerical simulations of CR protons using a three-dimensional magnetohydrodynamics (MHD) simulation of an interstellar medium swept-up by a blast wave. We analyse the CRs diffusion at a length scale of order a few pc, and show the Richtmeyer-Meshkov instability can provide enough turbulence downstream of the shock to make the diffusion coefficient close to the Bohm level for energy larger than 30 TeV for a realistic interstellar medium.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.175-178
• /
• 2005

중첩 T블록 방법을 이용하여 네모난 금속 홈에 평면파가 입사되는 경우의 해석적인 산란해를 구한다. 여러 개의 금속 홈이 있는 경우에도 각 영역을 세부 영역으로 나누어 수치효율을 증대시킨다. 최종 산란해가 빠른 적분식을 가진 간단한 닫힌 해로 표시된다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.286-293
• /
• 2009

In this paper, we present an optimal shape design method for a dielectric microlens which is used to focus an incoming infrared plane wave in wideband, by exploiting the finite difference time domain (FDTD) technique and the topology optimization technique. Topology optimization is a scheme to search an optimal shape by adjusting the material properties, which are design variables, within the design space. And by introducing the adjoint variable method, we can effectively calculate a derivative of the objective function with respect to the design variable. To verify the proposed method, a shape design problem of a dielectric microlens is tested when illuminated by a transverse electric (TE)-polarized infrared plane wave. In this problem, the design variable is the dielectric constant within the design space of a dielectric microlens. The design objective is to maximally focus the incoming magnetic field at a specific point in wideband.