• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.608-615
• /
• 2007

Generally time of arrival (TOA) information via two way communications can be derived by accurate round trip time (RTT) between two devices. However, response time demanded in RTT measurement is long, a serious TOA error is caused by each different clock drift between two devices. In order to solve this problem, we propose the TOA and time difference of arrival (TDOA) estimation scheme with mitigating clock drift effect. To verify the performance of proposed method, we compared the proposed scheme with one way based TDOA acquisition method introduced by IEEE 802.15.4a Task Group and then we could conclude that the proposed method has better performance over other methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4503-4508
• /
• 2010

A direction finding(DF) technology of a signal is very important for electronic warfare and has studied for a long time. The method of TDOA(time difference of arrival) is one of good DF methods in this time, and that is to receive an emitter signal with two antennas, to measure the time difference of a signal at two antennas, and converse the time difference to direction of the signal. For small DF error, high time resolution receiver and long baseline are needed. In this paper we suggest a good baseline with adaptive antenna arrangement into 10m*10m area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1934-1942
• /
• 2015

An estimation problem in the environment which GPS signals do not reach, should be solved by employing an indoor location estimation scheme. Location estimation schemes for indoor environments generally include the AOA, TOA, RSS, Fingerprint, and TDOA. For a ship environment where there exist many spaces enclosed by iron plates, the TDOA scheme is appropriate because location estimation is usually performed at a closed range. In this paper, we address the problem of estimating the location of a terminal under the ship environment. The problem of location estimation by using the TDOA is presented in detail, and then an algorithm for applying the estimation to the ship environment is proposed. Finally, the proposed algorithm of location estimation in a ship by the TDOA scheme is verified through simulations from three viewpoints.

• The Magazine of the IEIE
• /
• v.28 no.4
• /
• pp.102.1-102
• /
• 2001

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.394-397
• /
• 2001

There are several methods of measuring position. For example GPS, AOA, TDOA and using radio camera. In this Paper I used TDOA method in position measuring system. TDOA method uses arrival time difference. In position measuring system, three transfers which is placed in different position transfer signal to receiver in fixed time interval and receiver records arrival time of signal. Because receiver knows idle signal's arrival time, receiver can calculate the difference of the signal's arrival time between idle and real. When we obtain time difference we can know the receiver position by Newton Raphson method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1069-1080
• /
• 2016

TDOA(Time Difference Of Arrival)-based localization system such as the passive surveillance system performs the time synchronization between the receivers after separated installing multiple receivers to set the same clock for all receivers. And it estimates 2D(or 3D) location of the target by solving intersection of the multiple hyperbola(or hyperboloid) using TDOA. To perform time synchronization, one receiver must be set to the master, and it provide the reference data to compensate the clock of the rest of the slaves. The positioning accuracy of TDOA-based localization system is changed in accordance with the master that is selected among multiple receivers. So, the optimum receiver which is selected among multiple receivers must be set to master to get best performance in the considered deployment of receivers. In this paper, we propose a selection scheme of master receiver for time synchronization using DOP(Dilution Of Precision) which is based on location of the target and the multiple receivers. The proposed scheme has low complexity and short processing time, and it is easy to automate in the TDOA-based localization systems.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.15-21
• /
• 2020

This paper presents the outlier detection algorithm in the estimation method of a source location and velocity based on two-step weighted least-squares method using time difference of arrival(TDOA) and frequency difference of arrival(FDOA) data. Since the accuracy of the estimated location and velocity of a moving source can be reduced by the outliers of TDOA and FDOA data, it is important to detect and remove the outliers. In this paper, the method to find the minimum inlier data and the method to determine whether TDOA and FDOA data are included in inliers or outliers are presented. The results of numerical simulations show that the accuracy of the estimated location and velocity is improved by removing the outliers of TDOA and FDOA data.

• The Journal of Korea Robotics Society
• /
• v.3 no.3
• /
• pp.237-244
• /
• 2008

Nowadays, research on human-robot interaction has been getting increasing attention. In the research field of human-robot interaction, speech signal processing in particular is the source of much interest. In this paper, we report a speaker localization system with six microphones for a humanoid robot called MAHRU from KIST and propose a time delay of arrival (TDOA)-based feature matrix with its algorithm based on the minimum sum of absolute errors (MSAE) for sound source localization. The TDOA-based feature matrix is defined as a simple database matrix calculated from pairs of microphones installed on a humanoid robot. The proposed method, using the TDOA-based feature matrix and its algorithm based on MSAE, effortlessly localizes a sound source without any requirement for calculating approximate nonlinear equations. To verify the solid performance of our speaker localization system for a humanoid robot, we present various experimental results for the speech sources at all directions within 5 m distance and the height divided into three parts.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.105-114
• /
• 2015

This paper presents a fast Time Difference of Arrival (TDOA) estimation for sound source localization. TDOA is the time difference between the arrival times of a signal at two sensors. We propose a partial cross correlation method to increase the speed of TDOA estimation for sound source localization. We do this by predicting which part of the cross correlation function contains the required TDOA value with the help of the signal energies, and then we compute the cross correlation function in that direction only. Experiments show approximately 50% reduction in the cross correlation computation time thereby increasing the speed of TDOA computation. This makes it very relevant for real world surveillance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.737-740
• /
• 2009

In this paper, in order to improve the location estimation error existing in RTLS(Real Time Location Service) system for the mobility individual, we proposed a method of speed-adaptive location estimation that the transmitting signaling period is adaptively changed according to the changing speed of a mobility individual for each location interval. To get the more accurate location estimation values, we analyzed both the location values measured by Hybrid(TDOA and RSSI) method by using AeroScout TM RTLS system and the estimated value obtained from the theoretical calculation by using the Least Squares Method. Finally, we compared the analyzed values with a real location of mobility individual. From the experimental results based on our proposed method, it can be seen that the location estimation error for the real location of a mobility individual can be improved.