• KSBB Journal
• /
• v.26 no.4
• /
• pp.277-282
• /
• 2011

The penetration of outside material into skin is not easy. It is since the skin, which is a very hard barrier, protects the body against outside chemical and physical stimulation. Microneedle system which can help improve drug penetration into skin is advancing variously in transdermal drug delivery system (TDDS) in the field of skin care. After inserting microneedle into skin by using electrical or artificial forces, it makes microhole and drug penetration easily and induces natural skin rejuvenation. Diffusion and penetration of drug by optical and electrical force of microneedle is better for fast and effective TDDS. This is more developed than the traditional method such as the manual stamp, roller, and meso gun. The drug absorbed into dermal layer by microneedle helps revive and repair damaged skin. In the future, utilization of microneedle for skin care will progress constantly because of its human-friendly biodegradable materials and the development of the no pain microneedle.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.43-50
• /
• 2003

점착제는 경피흡수제제(transdermal drug delivery system, TDDS)의 중요한 구성요소 중의 하나이다. TDDS용 점착제는 일반적인 점착제의 역할 외에도 부착되는 피부에 적합해야 하고, 이것에 포함되는 약물 및 첨가제들과 양립하면서 약물의 전달을 효과적으로 지속해야한다. 본 총설에서는 흔히 사용되는 TDDS용 점착제인 polyisobutylenes, polyacrylates, silicones와 최근에 개발된 제품들을 소개한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.589-590
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.447-448
• /
• 2010

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.181-184
• /
• 2001

The purpose of this study was to develop transdermal drug delivery system (TDDS) for the combination of physostigmine and procyclidine. The effects of various pressure sensitive adhesives (PSA) on the percutaneous absorption of procyclidine across hairless mouse skin were evaluated to select an appropriate PSA. In addition, the influences of various vehicles on the percutaneous absorption of procyclidine from PSA matrix across hairless mouse skin were evaluated using flow-through diffusion cell system at $37^{\circ}C$. Physostigmine did not have any influence on the permeation rate of procyclidine. The flux of procyclidine was the highest in silicone and PIB and was relatively lower in SIS, Acryl, and SBS adhesive matrices, however, their use was limited by the crystallization of the drug in the matrix. Among acrylic adhesives, the permeability of procyclidine was the highest from poly (ethylene oxide) grafted acrylic adhesive. Some enhancers show different enhancing effect depending on the drug, however, many of the tested enhancers showed enhancing effect for the permeation of both procyclidine and physostigmine to some extent. $Crovol^{\circledR}$ EP 40 showed the highest enhancing effect on the permeation of both compounds. The size of TDDS to provide required permeation rate was estimated to be $35\;cm^2$ based on available information.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.556-561
• /
• 2021

Recently, iron oxide nanoparticles have been used as the subject of many studies on drug delivery system (DDS) due to their excellent magnetic properties and biocompatibility in response to external magnetic fields. In this study, hyaluronic acid-superparamagnetic microneedles (HA-SMNs) and carboxy methyl cellulose-superparamagnetic microneedles (CMC-SMNs) containing superparamagnetic iron oxide nanoparticles (SIONs) were prepared with HA and CMC as a matrix materials of MNs (microneedles). Various properties of SMNs were then investigated with scanning electron microscopy (SEM), superconducting quantum interference device-vibrating sample magnetometer (SQUD-VSM), frequency mixing magnetic detection (FMMD), and polymer/bio membrane. The SQUID-VSM measurements showed superparamagnetism of HA-SMNs and CMC-SMNs containing SIONs. The FMMD results demonstrated that the signal intensity changed significantly as the concentration of SIONs increased. In addition, SMNs exhibited the average skin permeability intensities on the bio membrane for HA-SMNs and CMC-SMNs were 92.5 and 98.5%, respectively. These results suggested that SMNs could be utilized as deliver materials for a TDDS and MR molecular imaging.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.223-228
• /
• 2008

The purpose of this study was to investigate the feasibility of developing transdermal drug delivery system (TDDS) for fentanyl used for the management of chronic cancer pain. The effect of type of pressure sensitive adhesive on the permeation of fentanyl from polyisobutylene (PIB), silicone and acrylic adhesive was evaluated. Due to the good adhesive force and relatively steady flux for 3 days, both acrylic and PIB adhesives were chosen for further study. The permeation rate of fentanyl was the highest from acrylic adhesive with hydroxyl functional group. Permeation rate increased linearly as the concentration of fentanyl in acrylic adhesive was increased from 2.5% to 10%. In case of PIB adhesive, crystals of fentanyl were developed above 5% drug load. $Crovol^{(R)}$ A40, $Crovol^{(R)}$ PK40 and Plurol $oleique^{(R)}$ provided higher flux of fentanyl.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.371-378
• /
• 2021

The purpose of study was to evaluate the usefulness a skin patch containing chlorogenic acid to the skin to identify changes in body fat and weight. 16 volunteers, consisting of 8 experimental groups and 8 control groups, participated in the study, and the study period was conducted for 4 weeks from Aug 03, 2020 to Aug 31, 2020. As a result of the inter-group effect test, there was no significant difference in body fat (F=4.38, p<.055), but it can be said that the experimental group had a positive effect because the difference in posterior score was larger than that of the control group. In the change of body weight, it was found that there was a significant difference in weight loss in the experimental group (F=9.43, p<.008). It will be meaningful as a preliminary study applying patches to studies related to obesity, and we hope that the results of the study will be used as basic data for research on patch materials in the future.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.161-169
• /
• 2023

In this study, we prepared naproxen (NP) imprinted biodegradable polymer based multi-layer biomaterials using allbanggae starch (ABS), polyvinyl alcohol (PVA), and alginic acid (SA), and investigated their physicochemical properties and the controlled drug release effects. In addition, the prepared multi-layer biomaterials were characterized by FE-SEM and FT-IR. In order to confirm the controlled drug release effect for the transdermal drug delivery system (TDDS), the NP release properties of NP imprinted multi-layer biomaterials were investigated using various pH buffer solutions and artificial skin at 36.5 ℃. The results of NP release in various pH buffer solutions indicated that the NP release at high pH was about 1.3 times faster than that at low pH. In addition, NP release in multi-layer biomaterials was about 4.0 times slower than that in single-layer biomaterials. It was confirmed that the NP release rate in triple-layer biomaterials was 4.0 times slower than that in single-layer biomaterials while using artificial skin. Also, it could be found that NP in double-layer biomaterials and triple-layer biomaterials was released sustainably for 12 h. The NP release mechanism in pH buffer solutions followed the Fickian diffusion mechanism, but followed the non-Fickian diffusion mechanism with artificial skin.