• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.201-205
• /
• 2007

This thesis aims to realize an intelligent home service robot that alerts the user to dangerous situations such as fires and gas leaks by utilizing wireless internet platforms in a cellular phone. The intelligent home service robot is composed of the following parts: The robot part consists of a gas sensor, a fire detector, a smoke sensor, ultrasonic sensors, motors, a camera and a Blue-tooth module and perceives various danger circumstances; The middleware part connects the robot part with the mobile part through the middleware applications, monitors the robot and notifies an emergency situation using SMS modules; The mobile part communicates with the middleware using TCP/IP protocol and controls the robot through various commands; The proposed scheme is to control the sensors of the robot part through and Atmega128 processor, and the mobile part was developed based on the WIPI platform. The robot and middleware parts will be installed in the household, and will be controled by mobile part from the outside.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.417-422
• /
• 2015

A service size of the IoT environment is determined by the number of sensors. The number of sensors increase means increases the amount of data generated by the IoT environment. There are studies to reliably operate a network for research and operational dynamic buffer for data when network congestion control congestion in the network environment. There are also studies of the stream data that has been processed in the connectionless network environment. In this study, we propose a sensor gateway for processing big data of the IoT environment. For this, review the RESTful for designing a sensor middleware, and apply the double-buffer algorithm to process the stream data efficiently. Finally, it generates a big data traffic using the MJpeg stream that is based on the HTTP protocol over TCP to evaluate the proposed system, with open source media player VLC using the image received and compare the throughput performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.695-698
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other hone network via Internet through IGD DCP with control commands of UPnP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.142-145
• /
• 2015

Presentation is the form of communication to draw out audience's behaviors in a limited time. The importance of presentation is emphasized over time. So speaker uses various remote toola. Therefor, in this paper, the remote control system for presentation using mobile network was proposed. The existing remote control applications has error on network connection, and are difficult to use without description for use. This system was designed and implemented to compensate the defect of the existing system. The system we have will connect PC and smartphones through socket to communication with TCP, which is connection-oriented transport service. It is made for users to select the files from the list of sent files and operate the process of presentation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.493-497
• /
• 2005

This paper is about the research of the User Agent implementation under wireless embedded environment, using SIP which is one of protocol components construct the VoIP system. The User Agent is made of the User Agent configuration block, the device thread block to control devices and the SIP stack block to process SIP messages. The device thread consists of the RTP thread and the sound lard device processing block. Futhermore, the SIP stack consist of the worker thread to process proxy events, the SIP transceiver and SIP thread to transfer and receive SIP messages. The H/W platform is a board included the Intel's XScale PXA255 processor, flash memory, SDRAM, Audio CODEC module and wireless LAN threough PCMCIA socket, furthermore a microphone and headphone is used by the audio 1/0. The system has embedded linux kernel 2.4.19. For embedded environment, the function of User Agent and SIP method is diminished. Finally, the resource of system could be reduced about $12.9\%$, compared to overall system resource, by minimizing peripherals control and excepting TCP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1051-1058
• /
• 2010

Mobile IP (MIP) and SIP are considered as important technologies to provide the macro mobility in the next generation mobile convergence networks which have heterogeneous access networks. Typically, MIP and SIP are more suitable for the non-real-time TCP connections and the real-time RTP/UDP sessions respectively, hence a handset which uses both of these sessions should simultaneously apply MIP and SIP to perform the efficient mobility management. Existing multi-layered mobility management schemes focus on the signalling order of each protocol. However, simple combining of two protocols cannot provide the performance enhancement of the mobility management. In this paper, a novel multi-layered mobility management algorithm using the combination of SIP and fast MIPv6 (FMIPv6) is proposed. FMIPv6 and SIP mobility is simultaneously performed to reduce the service interrupt time and to guarantee QoS requirement. The delay model is defined to analysis the performance of the algorithm and the simulation results show the performance of the proposed algorithm.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.169-176
• /
• 2006

Since home network system is usually set up based on the built-in system inside home at the time of construction, it has a difficulty in being compatible with new devices after construction. In this paper, we propose DBS(Dynamic Binding System) that can make links effectively among the devices located in inside and outside of home networks. Implementation of the DBS is based on the ZigBee's binding in WPAN(Wireless Personal Area Network). For this research, we constructed the system consisting of home server that contains proxy server and location server, devices inside home in which tinyOS is embedded, and mobile device that is an emulator. The communication inside home is done by IEEE 802.15.4 protocol and the communication between servers and mobile devices outside home is done by TCP/IP protocol. Regardless of device's address format, the DBS facilitates a link among the devices located inside and outside of home networks. And, introducing a new device into home network can be recognized easily by exchanging messages between devices.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.19-28
• /
• 2008

In this paper, we implemented an intelligent home service robot system which alerts users to danger by wireless internet platforms for interoperability(WIPI) of a cellular phone. This paper discusses the three parts of the system: robot, middleware and mobile system. First, the robot consists of a gas sensor, a fire detector, ultrasonic sensors, motors, a camera and a Bluetooth module. The robot perceives various danger circumstances. Second, the middleware connects the robot and the mobile system. It monitors the robot and sends emergency notification SMS message to the user's cellular phone if in danger. Third, the mobile system sends commands which control the robot using TCP/IP protocol. The proposed scheme is to control the sensors of the robot part through Atmega 128 processor, and the robot and middleware parts will be installed in the household, and will be controled by mobile part from the outside.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.909-918
• /
• 2006

Recently, the qualities of the call and QoS of data service in mobile wireless IP networks inclusive of internet wired networks are very challenging issues. IntServ, DiffServ and MPLS model for supporting QoS in wired networks are representative models which are investigated generally up to now. While, MIPv4(Mobile IPv4) and MIPv6 are proposed to support mobility management for mobile wireless internet networks. But, MIPv4 and MIPv6 based UDP and TCP/IP protocol have many issues to be solved like efficient QoS and frequent handover management. In this paper, we propose a efficient management platform to support seamless data services and end-to-end QoS management in IP-based wireless mobility environments using transport layer protocol, SCTP which support multi-homing and multi-streaming. We used SCTP protocol and IntServ technology for end-to-end communications to support multi-homing and seamless QoS management in the IP-based mobile wireless networks.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.221-229
• /
• 2007

Security of the port TCP/80 has been demanded by reason that the others besides web services have been rapidly increasing use of the port. Existing traffic analysis approaches can't distinguish web services traffic from application services when traffic passes though the port. monitoring method based on protocol and port analysis were weak in analyzing harmful traffic using the web port on account of being unable to distinguish payload. In this paper, we propose a method of detecting harmful traffic by web traffic analysis. To begin, traffic Capture by real time and classify by web traffic. Classed web traffic sorts each application service details and apply weight and detect harmful traffic. Finally, method propose and implement through coding. Therefore have a purpose of these paper to classify existing traffic analysis approaches was difficult web traffic classified normal traffic and harmful traffic and improved performance.