• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Journal of Korean Biological Nursing Science
• /
• v.2 no.2
• /
• pp.67-80
• /
• 2000

The purpose of this study was to identify hindlimb muscle atrophy in stroke induced rat and determine the effect of endurance exercise on body weight, weight of hindlimb muscle during 7 days after stroke induction. Thirty four male Sprague-Dawley rats with 200-270g body weight were divided into four groups : control, control+exercise(Con+Ex), stroke, and exercise after stroke(St+Ex) group. The control group and Con+Ex group received sham operation and the stroke group and St+Ex group received right MCA occlusion operation by using silicon-coated probe. The Con+Ex and St+Ex groups ran on a treadmill for 20min/day at 10m/min and $10^{\circ}grade$. Daily body weight and diet intake were measured every morning for 7 days. Cerebral infarction of stroke and St+Ex groups were identified by staining with TCC for 30minutes. The data were analyzed by Kruskal-Wallis test and Mann-Whitney U test using the SPSSWIN 9.0 program. Body weight of the control group at the 7th day increased by 18.3% significantly from the first day of experiment, that of the stroke group at the 7th day decreased by 6.7% significantly compared to the day of receiving right MCA occlusion operation. Body weight of the Con+Ex group at the 7th day increased by 10.3% significantly form the first day of experiment, that of St+Ex group at the 7th day also increased by 13.4% significantly compared to the day of receiving right MCA occlusion operation. The total amount of diet in stroke group decreased significantly compared to that of St+Ex and that of control group. In stroke group the wet weight of both sides of soleus, plantaris, and gastrocnemius muscles decreased significantly compared to that of control group. The relative weight of affected(left) plantaris and gastrocnemius muscles decreased significantly compared to that of the control group. The difference between the weight of affected and unaffected soleus, plantaris, and gastrocnemius muscles were not significant in stroke group. The wet weight of right gastrocnemius muscles in Con+Ex group increased compared to that of control group. The relative weight of right gastrocnemius muscle increased significantly compared to that of the control group. The wet weight of St+Ex group increased significantly compared to that of the stroke group in both sides of soleus, plantaris, and gastrocnemius muscles. The relative weight of affected plantaris muscle increased significantly compared to that of the stroke group. The difference between the weight of affected and unaffected soleus, plantaris, and gastrocnemius muscles were not significant in St+Ex group. Body weight and wet weight of soleus, plantaris, and gastrocnemius muscles in the St+Ex group did not recover to the values of control group. Based on these results, it can be suggested that endurance exercise during acute stage of stroke can reduce muscle atrophy related to denervation, inactivity and undernutrition.

• Journal of Korean Biological Nursing Science
• /
• v.4 no.1
• /
• pp.51-69
• /
• 2002

The purpose of this study was to identify the effect of cerebral ischemia on affected(Lt) and unaffected(Rt) side of soleus, plantaris and gastrocnemius muscle mass and determine the effect of exercise on affected and unaffected side on soleus, plantaris and gastrocnemius muscle mass during acute stage of stroke. Sixteen male Sprague-Dawley rate with 200-270g body weight were randomly divided into three groups: control, stroke, and exercise after stroke(St+Ex) group. The control group received sham operation and the stroke group and St+Ex group received transient right MCA(middle cerebral artery) occlusion operation. The St+Ex groups ran on a treadmill for 20min/day at 10m/min and $10^{\circ}$ grade for 6days. During the experimental period body weight and diet intake was measured every morning. On the 7th day after operation, muscles were dissected from both affected and unaffected side of hindlimb. Cerebral infarction of stroke and St+Ex groups were identified by staining with TCC for 30 minutes. The data were analyzed by Kruskal-Wallis test and Mann-Whitney U test using the SPSSWIN 9.0 program. Significance was accepted at the level of p<0.05. The results were summarized follows : 1) There were no significant difference of the body weight on the first day of experiment among 3 groups. Whereas on the 7th day, the body weight of both stroke group and St+Ex group were significantly smaller than that of control group. Body weight of St+Ex group on the 7th day tended to be larger than that of stroke group. 2) Total diet intake of both stroke group and St+Ex group were also significantly smaller than that of control group. While total amount of diet intake in St+Ex group tended to be larger than that of stroke group. 3) The weight of gastrocnemius muscle of affected side in stroke group significantly decreased compared to that of control group and the weight of soleus and plantaris muscle of affected side in stroke group tended to decrease compared to that of control group. 4) The weight of plantaris muscle of unaffected side in stroke group significantly decreased compared to that of control group and the weight of soleus and gastrocnemius muscle of unaffected side in stroke group tended to decrease compared to those of control group. 5) The weight of gastrocnemius muscle of affected side in stroke group significantly decreased compared to that of unaffected side and there was no significant difference of the weight of soleus and plantaris muscle in stroke group between affected side and unaffected side. 6) The weight of soleus, plantaris and gastrocnemius muscle of both affected side and unaffected side in St+Ex group had a tendency of increase compared to those of stroke group. The relative weight of soleus and gastrocnemius muscle of affected side and soleus muscle of unaffected side in St+Ex group had a tendency to increase compared to those of stroke group. Based on these results, exercise during acute stage of stroke might attenuate muscle atrophy of both affected and unaffected side of hindlimb muscles.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.17-26
• /
• 2018

If a photovoltaic (PV) system is installed in a primary feeder interconnected with the PV system, bi-directional power flow can occur, and then, the magnitude and direction of the fault current can change, depending on the fault location and point of common coupling (PCC) of the PV system, and the time current curve (TCC) cannot be properly coordinated between protection devices. Also, it is difficult to obtain a proper time interval for protection devices because the conventional setting approach is applied, even though the PV system is installed and operating. Therefore, this paper presents three operation modes considering the operational conditions of the PV system to obtain setting values for protection devices. Based on the mode, this paper proposes an algorithm to calculate the optimal protection coordination time interval according to the introduction capacity of the PV system. In addition, this paper performs modelling of a distribution system with the PV system and protection devices by using Off-DAS S/W, and analyzes the characteristics of the time interval between the protection devices, such as substation relays, reclosers, customer relays, and PV customer relays. The simulation results confirmed that the proposed operational modes and setting-value algorithms are useful and effective for protection coordination in a distribution system for a PV system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.61-66
• /
• 2017

Poly lactic acid(PLA) and poly butylene adipate-co-terephthalate(PBAT) film was prepared using a twin extruder. PLA (25%) and PBAT (75%) were mixed with various ratio of chain extenders, such as $Joncryl^{(R)}$ and hexamethylene diisocyanate(HDI) to improve the mechanical and thermal properties of produced bio composite films. Tensile strengths of films were steadily increased with increasing ratio of chain extender. The tensile strength of control films was about 25 MPa, and the tensile strength of films with combined chain extenders was above 40 MPa. The films with $Joncryl^{(R)}$ resulted in improved tensile strength, while the film with HDI alone showed improved percent elongation at break. By adding chain extenders into PLA/PBAT resin, the cold crystallization temperature (Tcc) and decomposition temperature (Td) of the produced bio composite films increased. It revealed that the addition of two types of chain extenders was efficient way to get PLA/PBAT film with improved strength and elongation.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.11-11
• /
• 2000

이동통신기술의 급격한 발달로 고주파회로의 packaging과 interconnect 기술의 고성능화 와 저가격화에 대한 새로운 도전이 요구되고 있다‘ 대부분 기존의 무선통신 부품은 P PCB(Printed Wiring Board)기술을 활용하고 있으나 이러한 기술이 점차로 고주파화되는 경 향을 만족시킬수 없어 새로운 고주파 부품기술이 요구되고 있는 실정이다 .. RF 회로를 구성 하기 위하여 PCB소재의 환경적, 치수안정성 문제를 극복하기 위하여 L TCC(Low T Temperature Cofired Ceramics)기술이 최근 주목을 받고 있다. 차세대 이동통신 기술은 수십 GHz 이상의 고주파특성이 우수하고, 고성능의 초소형의 부품을 저가격으로 제조할수 있으며, 시장의 변화에 기민하게 대처할수 있는 기술이 요구되 고 있으며, 이러한 기술적 필요성에 부합할수 있도록 LTCC 기술이 제안되었다. 이러한 C Ceramic Interconnect 기술은 높은 신뢰성을 바탕으로 fine patterning 기술과 저가의 m metallizing 기술로 가능하게 되었다. 초고주파 통신부품기술은 미국과 유럽 등을 중심으로 G GHz 대역또는 mm wave 대역의 기술에 대하여 치열한 기술개발 경쟁을 벌이고 있으며, 이 러한 고주파 패키징 기술을 바탕으로 미래의 군사, 항공, 우주 및 이동통신 기술에 지대한 영향을 미칠수 있는 기반기술로 자리잡을 전망이다. L LTCC 기술은 기존의 후막혼성기술에 비하여 공정이 단순하고 대량생산이 가능하고 가 격이 비교적 저렴하다. 또한 다층구조로 제작할수 있고, 수동소자를 내장할수 있어 회로의 소형화와 고밀도화가 가능하다. 특히 무선으로 초고속 정보를 처리하기 위하여 이동통신기 기의 고주파화가 빠르게 진행됨에 따라서 고분자재료에 비하여 고주파특성이 우수할뿐아니 라 환경적, 치수안정성이 우수한 세라믹소재플 사용함으로써 고주파 손실율을 저감할 수 있 다 .. LTCC 기술은 후막회로 기술과 tape dielectric 기술이 결합된 기술이다. 표준화된 소재 와 공정기술을 활용하여 저가격으로 고성능소자플 제작할 수 있으며, 전극재료로서 높은 전 도도를 갖고 있는 Ag, Cu, Au 및 Pd! Ag릎 사용함으로써 고주파 손실을 저감시킬 수 있다. L LTCC 기술이 최종적으로 소형화, 고기능 고주파 부품기술로 지속적으로 발전하기 위하여 무수축(Zero shrinkage) 소성기술, 광식각 후막기술 등이 원천기술로서 확립될 수 있어야 하 며, 특히 국내의 이동통신 기술에 대한 막대한 투자에도 불구하고 차세대 이동통신 부품기 술에 대한 개발은 상대적으로 미흡한 실정이므로 국내에 LTCC 관련 소재공정 및 부품소자 기술에 대한 개발투자가 시급히 이루워져야 할 것으로 판단된다. 본 발표에서는 지금까지 국내외 LTCC 기술의 발전과정을 정리하였고, 현재 이 기술의 응용과 소재와 공정을 중심으로한 개발현황에 대하여 조사하였으며, 앞으로 LTCC가 발전 해야할 방향을 제시하고자 한다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5941-5948
• /
• 2013

Tumor response to antineoplastic drugs is not always predictable. This is also true for bladder carcinoma, a highly recurrent neoplasia. Currently, the combination of cisplatin and gemcitabine is well accepted as a standard protocol for treating bladder carcinoma. However, in some cases, this treatment protocol causes harmful side effects. Therefore, we investigated the roles of the genes TP53, RASSF1A (a tumor suppressor gene) and hMLH1 (a gene involved in the mismatch repair pathway) in cell susceptibility to cisplatin/gemcitabine treatment. Two bladder transitional carcinoma cell (TCC) lines, RT4 (wild-type TP53) and 5637 (mutated TP53), were used in this study. First, we evaluated whether the genotoxic potential of cisplatin/gemcitabine was dependent on TP53 status. Then, we evaluated whether the two antineoplastic drugs modulated RASSF1A and hMLH1 expression in the two cell lines. Increased DNA damage was observed in both cell lines after treatment with cisplatin or gemcitabine and with the two drugs simultaneously, as depicted by the comet assay. A lack of RASSF1A expression and hypermethylation of its promoter were observed before and after treatment in both cell lines. On the other hand, hMLH1 downregulation, unrelated to methylation status, was observed in RT4 cells after treatment with cisplatin or with cisplatin and gemcitabine simultaneously (wild-type TP53); in 5637 cells, hMLH1 was upregulated only after treatment with gemcitabine. In conclusion, the three treatment protocols were genotoxic, independent of TP53 status. However, cisplatin was the most effective, causing the highest level of DNA damage in both wild-type and mutated TP53 cells. Gemcitabine was the least genotoxic agent in both cell lines. Furthermore, no relationship was observed between the amount of DNA damage and the level of hMLH1 and RASSF1A expression. Therefore, other alternative pathways might be involved in cisplatin and gemcitabine genotoxicity in these two bladder cancer cell lines.

• KSBB Journal
• /
• v.32 no.1
• /
• pp.63-70
• /
• 2017

Bamboo leaf has many nutritional and bioactive compounds such as polyphenols, and it can be used for various foods application. Fermentation is one of appropriate processes that can affect the nutrition, taste and flavor, and antioxidant activities of foods. In this study, a representative domestic bamboo tree (Sasa coreana Nakai) leaves were fermented by Bacillus subtilis KCCM 11315 and the changes of carbohydrates, minerals, amino acids, and phenolic compounds and antioxidant activities were investigated before and after fermentation. During the fermentation period, firstly, the leaf was softened and turned to brown. The constituent carbohydrates were slightly increased from $432.09{\pm}5.38mg/g$ to $458.42{\pm}7.39mg/g$, and free sugars decreased by 95% from $28.12{\pm}2.03mg/g$ to $1.4{\pm}0.14mg/g$. Mineral was $20987.5{\pm}345.1{\mu}g/mL$, which was slightly increased after the fermentation compared to $20804.1{\pm}364.6{\mu}g/mL$ before that. The total amino acids were increased to $73881.94{\pm}137.59mg/100g$ compared to $58464.51{\pm}109.12mg/100g$ before fermentation, and free amino acids decreased by more than 85% from $32782.67{\pm}92.49mg/100g$ to $4827.83{\pm}19.76mg/100g$. Total polyphenols content (TPC) increased from $25.51{\pm}1.04GAE^*mg/g$ to $35.34{\pm}0.91GAE^*mg/g$, and the total flavonoid content (TFC) increased to $80.57{\pm}0.22QE^*mg/g$ compared to $69.64{\pm}0.26QE^*mg/g$. The total catechin content (TCC) of TFC was decreased from $69.64{\pm}0.94mg/L$ to $58.23{\pm}0.76mg/L$. The DPPH radical $IC_{50}$ of bamboo leaves decreased to $2624.85{\pm}37.03{\mu}g/mL$ and the ABTS radical $IC_{50}$ of $187.26{\pm}4.78{\mu}g/mL$ was increased after the fermentation. These results could be used as essential nutritional data before developing processed food products using the bamboo leaf.