• 제목/요약/키워드: TBCC(Turbine Based Combined Cycle)

검색결과 3건 처리시간 0.017초

재사용 우주 발사체의 TBCC 엔진 성능 설계 기법 (TBCC Engine Performance Design Technique of Reusable Launch Vehicle)

  • 김성진;성홍계
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.167-170
    • /
    • 2008
  • 아음속과 초음속 영역에서 모두 비행하는 재사용 비행체의 추진기관인 TBCC(Turbine Based Combined Cycle)엔진의 성능 설계 기법에 대한 연구를 수행하였다. 이 엔진은 터보제트엔진과 램제트 엔진의 복합 사이클 엔진으로 구성되어 있으며, 비행 마하수 영역별로 터보제트엔진의 작동과 램제트 엔진의 작동 그리고 터보제트엔진과 램제트엔진이 동시 작동하는 구간으로 구성된다. TBCC엔진의 성능해석 기법을 제안하고, 개별 엔진의 성능 결과를 검증 하였으며, 가상의 비행 영역에서 TBCC엔진의 성능을 해석하였다.

  • PDF

터보제트-램제트 엔진의 천이모드를 고려한 TBCC 엔진의 성능 특성 (Performance Characteristics of a TBCC Engine with Turbo-Ramjet Engine Transition Mode)

  • 문규환;성홍계
    • 한국항공우주학회지
    • /
    • 제44권2호
    • /
    • pp.116-122
    • /
    • 2016
  • 터보제트 엔진에서 램제트 엔진으로의 작동 천이를 고려한 TBCC엔진의 성능 특성을 연구하였다. 터보제트 엔진과 램제트 엔진의 성능모델을 제시하고 터보제트와 램제트의 작동 비율을 조절하여 성능 변화가 연속적으로 발생하도록 엔진 작동의 천이 모드를 고려하였다. 이를 통해 다양한 마하수와 고도에서의 완만한 엔진 성능 변화를 나타냈음을 확인하였다. 일정고도(11km)와 가상의 비행 궤적에 대하여 천이 모드를 적용하여 TBCC 엔진의 추력과 비추력의 변화를 분석하였으며, 이를 통해 예상 비행 조건과 엔진의 천이 모드를 고려한 성능 변화와 복합 사이클 엔진 작동 천이 모드의 필요성을 제안하였다.

Effect of control route on the unstart/restart characteristics of an over-under TBCC inlet

  • Li, Nan;Chang, Juntao;Tang, Jingfeng;Yu, Daren;Bao, Wen;Song, Yanping
    • Advances in aircraft and spacecraft science
    • /
    • 제5권4호
    • /
    • pp.431-444
    • /
    • 2018
  • Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.