• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.249-256
• /
• 1986

The carp (Cyprinus carpio) used in the experiment were hatched in the spring this year and reared to 5.96g($4.84{\sim}6.55g$) in mean weight in a nursery pond at Daeyon fish farm, Pusan, Korea. The sample fish were exposed to different conditions of total ammonia (TA-N) concentrations 10, 20 and 30ppm and pH 6.5, 7.0, 7.5 and 8.0 at water temperatures 20, 25 and $30^{\circ}C$ for 24, 48 and 72 hours. After the procedure, the gill, liver and kidney of the fish were examined histopathologically. In this experiment, with the rise of water temperature, increase of pH and ammonia concentration, and the extension of exposure time the three organs showed the tendency of apparent abnormal changes such as hypertrophy and necrosis in their tissues. At $20^{\circ}C$ of water temperature gill tissue did not show any abnormality regardless of the change of pH at 10 ppm of ammonia concentration for 24 hours of exposure, but beyond the conditions given above, there occurred hypertrophy and the epithelium of gill lamellae was detached. The detach of gill lamellae epithelium initiated from the proximal part of the gill lamellae then gradually spread toward the uppermost tip. The heavier vacuolation of the liver was observed with the rise of water temperature and pH, and such morbid state in the liver was considered to be the result of edema in the liver tissue. The kidney showed no damage to the renal tubule epithelium at pH 6.5, but it was damaged at pH 8.0 when exposed to 30 ppm ammonia at $20^{\circ}C$ for 24 hours.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.3_4
• /
• pp.19-28
• /
• 1990

Nitroarenes are ubiquitous environmental pollutants displaying potent mutagenicity in bacteria and carcinogenicity in mammal. In this study, the concentration of nitroarenes in coarse and fine particles and mutagenicity of POC$\_$N/ fraction was investigated in suspended particulates at the Shinchon and Bulkwang area of Seoul. The suspended particulates were collected bimonthly by a high volume cascade impactor air sampler from July 1987 to May 1988. Extractable organic matter was obtained by ultrasonic extraction on diethly ether/cyclohexane (8/2, v/v). Neutral fraction was obtained by liquid-liquid extraction. Polar neutral organic compounds (POC$\_$N/) was fractionated by thin-layer chromatography. Finally, the concentrations of nitroarenes in POC$\_$N/ fraction were measured and determined by capillary gas chromatography. Direct and indirect mutagenicity of POC$\_$N/ fraction were measured using Salmonella typhimurium TA 98. The result were as follows: 1) Major nitroarenes at the Shinchon area was 1-nitropyrene and at the Bulkwang area it was 2,7-dinitro-9-fluorenone during the year. 2) Average concentration of total nitroarenes measured was 67.26 ng/m$^3$in fine particles which was 1,3 folds higher that in coarse particle (52.30 ng/m$^3$). 3) Annual pattern of nitroarenes concentrations revealed that concentration during heating season (Feb., Jan., Mar.) was 2.2 folds higher than that in non heating season (May, Jul., Sep.). Concentration of each season has 157.68 ng/m$^3$and 80.39 ng/m$^3$. 4) The mutagenic activity of POC$\_$N/ fraction from fine particles was higher compared to that of coarse particles and was increased when metabolically activated, with 59 mixture. Mutagenicities, Metabolically activated, were significantly different between Shinchon and Bulkwang area, 322.8 rev/250 $\mu\textrm{g}$/plate and 286.8 rev/250 $\mu\textrm{g}$/plate, respectively. 5) Annual pattern of mutagenicity of POC$\_$N/ fraction revealed that mutagenicity during the heating season was 1.7 folds higher at Shinchon area and 1.2 folds higher at Bulkwang than during the non heating season. The variable contents and levels of nitroarenes in suspended particulates may affect human health significantly. Further studies such as risk assessment should be conducted on the basis of these kind of studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.24-24
• /
• 1998

반도체장비를 포함하는 초고진공장비의 園훌化가 급속히 그리고 절실히 요구되고 있는 것이 현실정이다. 當面해서 실현할 국산진공장비의 대상은 廣範圍하다. 즉, 각종 진공 pump ( (rotary, dry, diffusion, cryo, ion, turbo melecular pump), 진공 chamber, 진공 line, gate valve 를 위 시 한 진공 V머ve, flange, gasket, fl않d야lU, mainpulater 퉁 진공 部品이 다. 진공계 의 핵심 은 適切하고 優良한 진공재료의 선태파 사용이다. 진공장비는 사용자가 원하는 진공도를 원하 는 시간 동안 륨空度를 유지해 주어야 한다. 진공재료 선태의 기준사항은:(1) 기체의 透過성 (2) 薰했훌 (3) 혔體放出특성 - -outgassing과 degassing- (4) 機械的 량훌度 (5) 온도 의존성 (6) 化學톡성 (7) 加I성 및 鎔接 성 (8) 課電특성 (9) 磁氣특성 (10) 高速함子 및 放射線 특성 (11) 經濟성 및 調達생 둥이 다. 우량한 초고진공계재료는 풍부하게 개발되어 왔고, 또 新材料들이 개발되고 있다. 여기에서는 주로 초고진공 내지는 극고진공계의 構造材料, 機能材料, 部品材料 일반파 몇가지 신재료의 특 성에 관해서 記述한다. M Mild SteeHSAE, 1112, 1010, 1020, 1022, etc)., S Stainless SteeHAlSI, 304, 304L, 310, 316, 321, 347): 구조재료, chamber, fl하1ges A Aluminum과 Alloys (1060, 1100, 2014, 4032, 6(뻐1): 구조재료, chamber, flanges, gaskets A AI, Al 떠loy는 SS에 代替하는 역 할올 시 작하고 있다. C Copper, Copper Alloys(C11$\alpha$)0, C26800, C61400, Cl7200): 내장인자, gasket, cryopanel, tubing T Titanium, Ziriconium, Haf띠um 및 Alloys: 특히 Ti은 10n pump 용 getter material 이 외 에 U UHV,XHV용 chamber계로서 관심올 끌고 있다. N Nickel, Nickel Alloys (200, 204, 211, monel, nichrome): 부식 방지 , 전자장치 , 자기 장치 귀 금속(Ag, Au, Pt, Pd, Rh, Ir, Os, Ru): 보조부품, gasket, filament, coating, thermocouple, 접 합부위 T TiC, SiC, zrC, HfC, TaC 둥의 탄화물과, BN, TiN, AlN 동의 질화물, 붕화물이 둥장하고 었 다. 유리: Soda Lime, Borosilicate, Potash Soda Lead: View Port, Chamber envelope C Ceramics: AlZ03, BeO, MgO, zrOz, SiOz, MgOzSiOz, 3Alz032SiOz, Z$textsc{k}$hSiOz S상N4: e electrical, thermal insulators, crucibles, boats, single crystals, sepctr려 windows 저자는 최근 저자들이 발견한 Zr-Ti-Cu-Ni-Be amorphous alloys coated cham뾰r가 radiation p proof로 이용될 수 있는 사실을 점검하고 었다 .. Z.Y. Hua 들은 Cs3Sb를 새로운 photocathode 재료로 보고하고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3458-3464
• /
• 2009

This study was conducted to investigate the relationship between maximum oxygen uptake and its related factors including body measurement and vascular compliance. The subjects of our study were 43 males and 53 females aged 40 to 59 who were visited in military health center. The main results were that 1.the degree of obesity had significantly negative correlation to vascular compliance in male, and waist-hip ratio in female. 2. The degree of obesity, body mass index, waist-hip ratio and body fat percent had significantly negative correlation to maximum oxygen uptake in male, and waist-hip ratio & body fat percent in female. 3. Maximum heart rate had significantly positive correlation to maximum oxygen uptake in male, and vascular compliance & maximum heart rate in female. 4. In multiple regression analysis which maximum oxygen uptake was as dependent variable, body fat percent, vascular compliance and maximum heart rate were significant variables for both male and female. In conclusion, Maximum oxygen uptake of some rural people age 40 to 59 were affected by various factors such as body fat percent, vascular compliance, and maximum heart rate.

• Journal of Oral Medicine and Pain
• /
• v.34 no.3
• /
• pp.317-324
• /
• 2009

This study aimed to assess stiffness and elasticity of the masticatory muscle in the patients with the masticatory muscle pain using a tactile sensor and to investigate whether the masticatory muscle pain affects the facial expression muscles. From those who visited Department of Oral Medicine in Dankook University Dental Hospital, 27 patients presenting with unilateral muscle pain and tenderness in the masseter muscle (Ms) were selected (mean age: $36.4{\pm}13.8$ years). Exclusion criterion was those who also had temporomandibular joint (TMJ) disorders or any neurological pain. Muscle stiffness and elasticity for the muscles of mastication and facial expression was investigated with the tactile sensor (Venustron, Axiom Co., JAPAN) and the muscles measured were the Ms, anterior temporal muscle (Ta), frontalis (Fr), inferior orbicularis oculi (Ooci), zygomaticus major (Zm), superior and inferior orbicularis oris (Oors, Oori) and mentalis (Mn). t-tests was used to compare side difference in muscle stiffness and elasticity. Side differences were also compared between diagnostic groups (local muscle soreness (LMS) vs myofascial pain syndrome (MPS) and between acute (< 6M) and chronic ($\geq$ 6M) groups. This study showed that Ms and Zm at affected side exhibited significantly increased stiffness and decreased elasticity as compared to the unaffected side.(p<0.05) There was no significant difference between local muscle soreness and myofascial pain syndrome groups and between acute and chronic groups. The results of this study suggests that masticatory muscle pain in Ms can affect muscle stiffness and elasticity not only for Ms but also for Zm, the facial expression muscle.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.142-147
• /
• 2020

In this paper, we report highly efficient second harmonic generation of continuous-wave Yb fiber lasers incorporating a periodically poled LiTaO₃ device (MgO:PPSLT) as a frequency converter. The seed laser output from a Yb fiber master oscillator using a Fabry-Perot feedback cavity was amplified in a Yb fiber amplifier stage, yielding 28.5 W of linearly polarized output at 1064 nm in a beam with beam quality, M², of ~1.07. Second harmonic generation was achieved by passing the laser beam through MgO:PPSLT. Under optimized conditions, we obtained 11.1 W of green laser output at 532 nm for an incident signal power of 25.0 W at 1064 nm, corresponding to a conversion efficiency of 44.4%. The detailed investigation to find the optimized operating conditions and prospects for further improvement are discussed.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.651-660
• /
• 2011

This study was conducted to evaluate the quality characteristics of and chilling injury development in 'Ooishiwase' plum fruits after harvest, according to the ripening stage and storage temperature. The fruits were harvested at three ripening stages (60, 80, and >90% skin color) and were then stored at 1, 4, 5, 6, and $20^{\circ}C$ cold-storage rooms for up to 48 days. The fruit quality parameters, respiration patterns, and chilling injury development were monitored during the storage periods and the three days of subsequent ripening at $20^{\circ}C$. The fruits harvested at the 60%-skin-color stage maintained the flesh firmness, color, weight loss, and TA, and their respiration rates and ethylene production were decreased compared with the 80%-or >90%-skin-color fruits, at a lower storage temperature. The major symptoms of chilling injuries in the Ooishiwase plums were gel breakdown, flesh browning, and flesh translucency. These symptoms appeared at all the low-storage-temperature and ripening treatment stages. When the fruits, however, were harvested at a more immature stage and were stored at a lower storage temperature, the chilling injury development decreased. These results show that the development of chilling injury in Ooishiwase plums is related to the climacteric behavior during cold storage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).

• Journal of Environmental Health Sciences
• /
• v.41 no.4
• /
• pp.241-248
• /
• 2015

Objectives: This study was conducted to provide scientific and effective information on phytoncides, which are associated with forest healing, and to activate recreational forests. Methods: The target sites were natural recreation forests, a forest park and an arboretum, and the control sites were three urban parks. The samples were collected at a volume of 6.0 L and a flow rate of 0.1 L/min for one hour using a low volume pump and the solid adsorbent sampling method. The phytoncide compounds adsorbed in the Tenax TA tube were analyzed by a automatic heat desorption unit and GC-MS. Results: By type of recreational forest, the annual concentrations of phytoncide (monoterpene) for the forest park showed the highest concentration with $1.450{\mu}g/m^3$, while those for the arboretum showed the lowest concentration at $0.892{\mu}g/m^3$, and thus the concentration of the forest park was approximately 1.6 times higher than the arboretum. The season showing the highest concentration of phytoncides was summer (June) and the forest park was the highest among the recreational forests. The concentrations of major components for phytoncide showed in descending order: ${\alpha}-pinene$, ${\beta}-pinene$, camphene, 3-carene and limonene. The seasonal concentration of ${\alpha}-pinene$, camphene and ${\beta}-pinene$ by type of recreational forest increased in April, which is characterized by low temperature and humidity, and the seasonal concentration of camphene decreased with higher humidity. The meteorological factors which had the high correlation with the concentration of total terpene were temperature and humidity. $CO_2$ and $O_2$ showed an inverse correlation. Conclusion: The major components of phytoncide were ${\alpha}-pinene$, ${\beta}-pinene$, camphene, 3-carene and limonene in descending order of concentration. Further and systematic study on the chemical nature of individual phytoncides, and on the effect of phytoncides on humans needs to be performed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.9-15
• /
• 2007

In this paper, we present the design of Schottky diodes and voltage multiplier for UHF-band passive RFID applications. The Schottky diodes were fabricated using Titanium (Ti/Al/Ta/Al)-Silicon (n-type) junction in $0.35\;{\mu}m$ CMOS process. The Schottky diode having $4{\times}10{\times}10\;{\mu}m^{2}$ contact area showed a turn-on voltage of about 150 mV for the forward diode current of $20\;{\mu}A$. The breakdown voltage is about -9 V, which provides sufficient peak inverse voltage necessary for the voltage multiplier in the RFID tag chip. The effect of the size of Schottky diode on the turn-on voltage and the input impedance at 900 MHz was investigated using small-signal equivalent model. Also, the effect or qualify factor of the diode on the input voltage to the tag chip is examined, which indicates that high qualify factor Schottky diode is desirable to minimize loss. The fabricated voltage multiplier resulted in a output voltage of more than 1.3 V for the input RF signal of 200mV, which is suitable for long-range RFID applications.