• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.35-43
• /
• 1995

To obtain high quality of $Ta_{2}O_{5}$ film, two dielectric layers of $Si_{3}N_{4}$ and $Ta_{2}O_{5}$ were subsequently formed on Si wafer. Silicon nitride films were thermally grown in 10 Torr ammonia ambient by R.F induced heating system. The thickness of thermally grown $Si_{3}N_{4}$ film was able to be controlled in the range of tens $\AA$ due to the self-limited growth property. $Ta_{2}O_{5}$ film of 200$\AA$ thickness was then deposited on the as-grown $Si_{3}N_{4}$ film about 25$\AA$ thickness by sputtering method and annealed at $900^{\circ}C$in $O_{2}$ ambient for 1hr. Stoichiometry film was prepared by the annealing in oxygen ambient. Despite the high temperature anneal process, silicon oxide layer was not grown at the interface of the layered films because of the oxidation barrier effect of Si$_{3}$N$_{4}$ film. The fabricated $Ta_{2}O_{5}$/$Si_{3}N_{4}$ film showed low leakage current less than several nA and high dielectric breakdown strength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.379-382
• /
• 2010

In this study, in order to develop the lead-free piezoelectric ceramics with high piezoelectric and dielectric properties, $(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3$ ceramics were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition enhanced density, electromechanical coupling factor($k_p$) piezoelectric constant $d_{33}$ and mechanical quality factor($Q_m$). At the 0.9 mol% $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition, density, electromechanical coupling factor($k_p$), dielectric constant(${\varepsilon}_r$) and piezoelectric constant($d_{33}$) of specimen showed the optimum values of 0.46, 471, and 148 pC/N, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.628-633
• /
• 1996

Large saturation magnetization $4pM_s$ is essentially required for soft magnetic thin layers used in magnetic recording devices. Amorphous Co-based alloys and Fe-Co alloys may be regarded as one of the candidates for soft magnetic materials which possess large $4\piM_s$. Some preparation process to improve soft magnetism of these films were performed in this study. Addition of Ta seemed to be effective to change the magnetostriction constant $\lambda$ from positive value to negative one. The magnetoelastic energy $K_e$ is strongly dependent on $\lambda$. $(Co_{95.7}Zr_{4.3})_{100-x}Ta_x$ films with $K_e$ of negative value have sufficiently soft magnetic characteristics. $Fe_{90}Co_{10}$ alloy exhibits extremely large $4\piM_s$, of about 24 kG. Addition of N and Ta to $Fe_{90}Co_{10}$ films improved the soft magnetism of them. The $Fe_{82.0}Co_{7.6}Ta_{10.4}$:N/Ti multilayered films exhibit better soft magnetic properties and better thermal stability than Fe-Co-Ta:N singlelayer films.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1299-1306
• /
• 1994

Effect of MgO content on microstructural evolution and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 system was investigated. MgO content was varied from 10 mol% deficiency to 10 mol% excess of stoichiometric composition, respectively. It was found that MgO-deficient specimen showed faster grain growth rate than stoichometric and MgO excess BMT system. Besides, sandwich type precipitates of Ba5Ta4O15 which was formed within the BMT grain, might lead to the anisotropic grain growth of BMT grain. On the contrary, in MgO excess specimen, BMT grain growth rate was retarded by precipitations of MgO phase in grain boundary. Besides, the Q values of MgO-deficient showed lower than MgO-excess due to precipitations of Ba5Ta4O15 within BMT grain.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.831-834
• /
• 1995

The nature of hydrogen bonding between thioacetamide and azines has been thoroughly investigated using near IR absorption spectroscopy. The νN-H + amide II combination band in thioacetamide (TA) has been analyzed to determine the thermodynamic constants for the formation of hydrogen bonded 1:1 TA:azine complexes in CCl4 and CHCl3 solutions. The relative stabilities of TA-azine complexes (pyridine->1,2-diazine->1,3-diazine->1,4-diazine-TA) are in good agreement with the relative proton affinities of azines in the gas phase. The results serve as a basis for analyzing the factors which influence the hydrogen bonding formation of TA in nonaqueous solutions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.410-415
• /
• 2008

This study was performed to observe the antimutagenic and cytotoxic activities of methanol extract of kochujang added with sea tangle and deep sea water salts (SDK) and kochujang added with sea tangle (SK) using the Ames test and SRB assay, respectively. The direct antimutagenic effect of SDK and SK methanol extracts were examined by Ames test using Salmonella Typhimurium TA98 and TA100. In the Ames test, methanol extract of SDK and SK alone did not exhibit mutagenicity and most of the samples showed high antimutagenic effects against mutation induced by N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) and 4-nitroquinoline-1-oxide (4NQO). Methanol extract of SDK ($200{\mu}g$/plate) showed approximately 71.4% inhibitory effect on the mutagenesis induced by 4NQO against TA98 strain; whereas 56.1% and 83.6% inhibitions were observed on the mutagenensis induced by 4NQO and MNNG against TA100 strain. The cytotoxic effects of SDK and SK increased with increasing sample concentration against human cervical adenocarcinoma (HeLa), human hepatocellular carcinoma (Hep3B), human breast adenocarcinoma (MCF-7), human stomach adenocarcinoma (AGS), and human lung carcinoma (A549). The SDK at the concentration of 1 mg/ml showed cytotoxicities of 61.5%, 61.3%, 51.4%, 57.9% and 77.7% against HeLa, Hep3B, MCF-7, AGS and A549, respectively. In contrast 1 mg/ml treatment of SDK and SK methanol extract had only $2{\sim}38%$ cytotoxicity on human transformed primary embryonal kidney cell (293).

• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.139-142
• /
• 2009

Recently, quaternary titanium alloys of the system Ti-Nb-Ta-Zr received considerable research interest as potential implant materials because of their excellent mechanical properties and biocompatibility. However, only few reported works were available on the corrosion behavior of such alloys. Hence, in the present work, electrochemical corrosion of Ti-35Nb-5Ta-7Zr alloy, which has been fabricated by arc melting and heat treatment, was studied in 0.9 wt% NaCl at $37\pm1^{\circ}C$, along with biomedical grade Ti-6Al-4V and CP-Ti. The phase and microstructure of the alloys were investigated employing XRD and SEM. The results of electrochemical studies indicated that the corrosion resistance of the quaternary alloy was inferior to that of Ti-6Al-4V and CP Ti.

• Tribology and Lubricants
• /
• v.32 no.4
• /
• pp.125-131
• /
• 2016

In recent years, thick ta-C coating has attracted considerable interest owing to its existing and potential commercial importance in applications such as automobile accessories, drills, and gears. The thickness of the ta-C coating is an important parameter in these applications. However, the biggest problems are achieving efficient coating and uniformity over a large area with high-speed deposition. Feasibility is confirmed for the ta-C coating thickness of up to 9.0 µm (coating speed: 3.0 µm/h, fixed substrate) using a single FCVA cathode. The thickness was determined using multiple coating cycles that were controlled using substrate temperature and residual stresses. In the present research, we have designed a coating system using FCVA plasma and produced enhanced thick ta-C coating. The system uses a specialized magnetic field configuration with stabilized DC arc plasma discharge during deposition. To achieve quality that is acceptable for use in automobile accessories, the magnetic field, T-type filters, and 10 pieces of a multi-cathode are used to demonstrate the deposition of the thick ta-C coating. The results of coating performance indicate that uniformity is ±7.6 , deposited area is 400 mm, and the thickness of the ta-C coating is up to 5.0 µm (coating speed: 0.3 µm/h, revolution and rotation). The hardness of the coating ranges from 30 to 59 GPa, and the adhesion strength level (HF1) ranges from 20 to 60 N, depending on the ta-C coating.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.627-631
• /
• 2011

[ $[Li_{0.04}(Na_{0.54}K_{0.46})_{0.96}](Nb_{1-0.04-X}TaxSb_{0.04})O_3$ ]lead-free piezoelectric ceramics have been prepared by normal sintering at $1,100^{\circ}C$ for 5 h. X-ray diffraction analysis indicated that specimens demonstrate orthorhombic symmetry when $Ta\leq5$ mol%. While transforming into tetragonal symmetry when $x\geq20$ mol%. These suggest that the orthorhombic and tetragonal phases co-exist in the ceramics with 5 mol% $cm^3$. As the result of SEM images, the grain growth was decreased with the increase of Ta substitution. The ceramics become 'softening', leading to improvements in $k_p$, $\varepsilon_r$ and $d_{33}$, but a decrease in $Q_m$. Excellent properties of $k_p$= 0.46, $d_{33}$= 293 pC/N, ${\varepsilon}_r$= 1,583 and Tc= $340^{\circ}C$ were obtained when Ta= 15 mol%.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.354-359
• /
• 2003

The microwave dielectric characteristics of (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ (0$\leq$x$\leq$1.0) ceramics were investigated by crystalstructure, variations of ionic polarizability, and microstructures. As x increased, (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ transformed to tetragonal structure. Because the ionic radius of (Mg$\_$1/3/Ta$\_$2/3/)$\^$4+/was slightly bigger than one of (Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)$\^$4+/, the cell parameters increased with increase of (Mg$\_$1/3/Ta$\_$2/3/)O$_2$concentration and coincided with prediction of the molecular additivity rule. As x increased, the compositions revealed ordered phase and were of single phase above 60 mol%. The increase of the ordered phase and grain size enhanced the Q and when ordering was completed at x over 0.6, the grain size was major factor for the increase in the a. Though the grain size increased, however, the porosity deteriorated the q. Therefore, the a depended on the order/disorder, the porosity, and the grain size in regular order.