• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.697-700
• /
• 2004

The SBT$(Sr_{0.8}Bi_{2.4}Ta_2O_9)$ thin films for semiconductor device were deposited on Pt-coated $Pt/TiO_2/SiO_2Si$ wafer by RF magnetron sputtering method at $400[^{\circ}C]$ and annealed at the temperature range from $600[^{\circ}C]$ to $850[^{\circ}C]$. The top electrodes(Pt) were deposited on SBT thin film by DC sputtering method. The crystallinity of SBT thin films were increased with increase of annealing temperature in the temperature range of $600[{\circ}C]\sim850[^{\circ}C]$. The annealing temperature properties were to be most excellent in the case of annealed SBT thin film at $750^{\circ}C]$. And, the maximum remanent polarization$(2P_r)$ and the coercive electric field$(E_c)$ at annealing temperature of $750[^{\circ}C]$ obtained about $11.60[{\mu}C/cm^2]$ and 48[kV/cm], respectively. Specially, it was seen that fatigue properties does not change in $10^{10}$ switching cycle.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.578-587
• /
• 2019

The purpose of this study is to examine differences in mental health indices such as self-compassion, trait anxiety, and depression, and color preference based on Sasang Constitution type. This study also explored the relationships among self-compassion, trait anxiety, and depression. 205 adults were surveyed for participants of this study. A Two-Step Questionnaire (TS-QSCD) was conducted to diagnose Sasang Constitution such as Tae-yangin, Tae-yinin, So-yangin, and So-yinin. Also, scales for self-compassion, trait anxiety, depression level, and color preference were utilized for measures. The results showed that among Sasang Constitutional groups, Ta-yangin had a higher level of self-compassion and lower trait anxiety than So-yinin. Furthermore, in relationships among mental health indices, trait anxiety and depression tendency were lower with higher self-compassion. No significant differences were revealed in depression level and color preference based on Sasang constitution. Finally, implications of this study for mental health were suggested and limitations were discussed.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.6
• /
• pp.412-420
• /
• 2020

Background: Measurement of chlorophyll fluorescence (CF) is useful for detection the ability of plants to tolerate environmental stresses such as drought, and excessive sunlight. Cnidium officinale Makino is highly sensitive to water stress and excessive sunlight. In this study, we evaluated the effect of soil water and shade treatment on the photosynthesis and leaf temperature change of C. officinale. Methods and Results: C. officinale was cultivated under uniform irrigation for 1 week drought stress (no watering) for 6 days. A significant decrease in CF was observed on the 5th day of withholding water (approximately 6% of soil water content) regardless of shading. Notably, the Rfd_lss parameter (CF decrease rates) with and without shade treatment was reduced by 73.1% and 56.5% respectively, at 6 days compared with those at the initial stage (0 day). The patterns of the degree of CF parameters corresponded to those of the soil water content and difference between leaf temperature (Ts) and air temperature (Ta). Meanwhile, CF parameters recovered to the 3 - 4 days levels after re-watering, while the soil water potential was completely restored. The suitable soil water content for C. officinale optimal growth was between -5 kPa and -10 kPa in this experiment. Conclusions: Lack of soil water in the cultivation of C. officinale, even with shading, decreased latent heat cooling through transpiration. As a result, heat dissipation declined, and the plant was subjected to drought stress. Soil water content plays a major role in photosynthesis and leaf temperature in C. officinale.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.45-56
• /
• 2021

Improved amylases were developed from protoplast fusants of two amylase-producing Aspergillus species. Twenty regenerated fusants were screened for amylase production using Remazol Brilliant Blue agar. Crude enzyme extracts produced by solid state fermentation of rice bran were assayed for activity. Three variable factors (temperature, pH and enzyme type) were optimized to increase the amylase activity of the parents and selected fusants using rice bran medium and solid state fermentation. Analysis of this optimization was completed using the Central Composite Design (CCD) of the Response Surface Methodology (RSM). Amylase activity assays conducted at room temperature and 80℃ demonstrated that Aspergillus designates, T5 (920.21 U/ml, 966.67 U/ml), T13 (430 U/ml, 1011.11 U/ml) and T14 (500.63 U/ml, 1012.00 U/ml) all exhibited improved function making them the preferred fusants. Amylases produced from these fusants were observed to be active over the entire pH range evaluated in this study. Fusants T5 and T14 demonstrated optimal activity under acidic and alkaline conditions, respectively. Fusants T13 and T14 produced the most amylase at 72 h while parents TA, TC and fusant T5 produced the most amylase after 96 h of incubation. Response surface methodology examinations revealed that the enzyme from fusant T5 was the optimal enzyme demonstrating the highest activity (1055.17 U/ml) at pH 4 and a temperature of 40℃. This enzyme lost activity with further increases in temperature. Starch hydrolysis using fusant T5 gave the highest yield of glucose (1.6158 g/100 ml). The significant activities of the selected fusants at 28 ± 2℃ and 80℃ and the higher sugar yields from cassava starch hydrolysis over their parental strains indicate that it is possible to improve amylase activity using the protoplast fusion technique.

• Journal of Gastric Cancer
• /
• v.22 no.4
• /
• pp.348-368
• /
• 2022

Purpose: Chromosomal instability is a hallmark of gastric cancer (GC). It can be driven by single nucleotide variants (SNVs) in cell cycle genes. We investigated the associations between SNVs in candidate genes, PLK2, PLK3, and ATM, and GC risk and clinicopathological features. Materials and Methods: The genotyping study included 542 patients with GC and healthy controls. Generalized linear models were used for the risk and clinicopathological association analyses. Survival analysis was performed using the Kaplan-Meier method. The binding of candidate miRs was analyzed using a luciferase reporter assay. Results: The PLK2 C_rs15009-C_rs963615 haplotype was under-represented in the GC group compared to that in the control group (P_corr=0.050). Male patients with the PLK2 rs963615 CT genotype had a lower risk of GC, whereas female patients had a higher risk (P=0.023; P=0.026). The PLK2 rs963615 CT genotype was associated with the absence of vascular invasion (P=0.012). The PLK3 rs12404160 AA genotype was associated with a higher risk of GC in the male population (P=0.015). The ATM T_rs228589-A_rs189037-G_rs4585 haplotype was associated with a higher risk of GC (P<0.001). The ATM rs228589, rs189037, and rs4585 genotypes TA+AA, AG+GG, and TG+GG were associated with the absence of perineural invasion (P=0.034). In vitro analysis showed that the cancer-associated miR-23b-5p mimic specifically bound to the PLK2 rs15009 G allele (P=0.0097). Moreover, low miR-23b expression predicted longer 10-year survival (P=0.0066) in patients with GC. Conclusions: PLK2, PLK3, and ATM SNVs could potentially be helpful for the prediction of GC risk and clinicopathological features. PLK2 rs15009 affects the binding of miR-23b-5p. MiR-23b-5p expression status could serve as a prognostic marker for survival in patients with GC.

• Microbiology and Biotechnology Letters
• /
• v.16 no.5
• /
• pp.369-373
• /
• 1988

The gene for thermostable alpha-amylase from the thermostable bacterium Bacillus licheniformis has been cloned and expressed in Escherichia coli. The Alpha-amylase producing E. coli cells contained a 7.4 kb chimeric plasmid (pTA 322) which was composed of the vector pBR322 and a 3.1 kb EcoRI fragment of B. licheniformis DNA. The alpha-amylase from cloned fragement was shown to be indistlnguishable from that of B. licheniformis in the optimum temperature of 9$0^{\circ}C$, heat stability and the pH stability. The foreign gene was expressed efficiently in E. coli and stably maintained.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.71-76
• /
• 2002

Several antagonistic bacteria, SD-1, 4, 10, 11, 14, 15, and 16, which have strong CMCase and amylase activities, were isolated from the fermented mushroom media. Among them, SD-1, 10, 11, and 15 have strong antibacterial activities against the mushroom pathogenic bacteria Pseudomonas sp., and SD-1, 10, 11, 14, and 16 have strong antifungal activities against the mushroom pathogenic fungi, Trichoderma sp. SD-14, 15, and 16 did not inhibit the growth of mushroom Pleurotus eryngii ASI-2302, and Pleurotus ostreatus ASI-2042 and ASI-2180. When the culture broth mixture of the seven bacterial strains was applied to the mushroom media, the growths of pathogens, Pseudomonas sp. and Trichoderma sp., were inhibited.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.452-460
• /
• 2007

Ultra-low loss ZERODUR and fused silica mirrors were manufactured and their light scattering characteristics were investigated. For this purpose, ZERODUR and fused silica substrates were super-polished by the bowl feed method. The surface roughness were 0.292 ${\AA}$ and 0.326 ${\AA}$ in rms for ZERODUR and fused silica, respectively. To obtain the high reflectivity, 22 thin film layers of $SiO_2$ and $Ta_2O_5$ were deposited by Ion Beam Sputtering. The measured light scattering of ZERODUR and fused silica mirror were 30.9 ppm and 4.6 ppm, respectively. This shows that the substrate surface roughness is not the only parameter which determines the light scattering of the mirror. In order to investigate the mechanism for additional light scattering of the ZERODUR mirror, the surface roughness of the mirror was measured by AFM and was found to be 2.3 times higher than that of the fused silica mirror. It is believed that there is some mismatch at the interface between the substrate and the first thin film layer which leads to the increased mirror surface roughness. To clarify this, the contact angle measurements were performed by SEO 300A, based on the Giriflaco-Good-Fowkes-Young method. The fused silica substrates with 0.46 ${\AA}$ in its physical surface roughness shows lower contact angle than that of the ZERODUR substrate with 0.31 ${\AA}$. This indicates that the thin film surface roughness is determined by not only its surface roughness but also the surface energy of the substrate, which depends on the chemical composition or crystalline orientation of the materials. The surface energy of each substrate was calculated from a contact angle measurement, and it shows that the higher the surface energy of the substrate, the better the surface roughness of the thin film.

• Journal of the Korean Magnetics Society
• /
• v.15 no.6
• /
• pp.315-319
• /
• 2005

To obtain low switching field ($H_{SW}$) we introduced amorphous ferromagnetic $Co_{70.5}Fe_{4,5}Si_{15}B_{10}$ single and synthetic antiferromagnet (SAF) free layers in magnetic tunnel junctions (MTJs). The switching characteristics for MTJs with structures $Si/SiO_2/Ta$ 45/Ru 9.5/IrMn 10/CoFe 7/AlOx/CoFeSiB 7 or CoFeSiB (t)/Ru 1.0/CoFeSiB (7-t)/Ru 60 (in nm) were investigated and compared to MTJs with $Co_{75}Fe_{25}$ and $Ni_{80}Fe_{20}$ free layers. CoFeSiB showed a lower saturation magnetization of $560 emu/cm^3$ and a higher anisotropy constant of $2800\;erg/cm^3$ than CoFe and NiFe, respectively. An exchange coupling energy ($J_{ex}$) of $-0.003erg/cm^2$ was observed by inserting a 1.0 nm Ru layer in between CoFeSiB layers. In the CoFeSiB single and SAF free layer MTJs, it was frond that the size dependence of the $H_{SW}$ originated from the lower $J_{ex}$ experimentally and by micromagnetic simulation based on the Landau-Lisfschitz-Gilbert equation. The CoFeSiB SAF structures showed lower $H_{SW}$ than that of NiFe, CoFe and CoFeSiB single structures. The CoFeSiB SAF structures were proved to be beneficial far the switching characteristics such as reducing the coercivity and increasing the sensitivity in micrometer to submicrometer-sized elements.