• Membrane Journal
• /
• v.24 no.1
• /
• pp.20-30
• /
• 2014

A membrane-coupled sequencing batch reactor (MSBR) was used for the advanced treatment of rural village sewage which is very low C/N ratio. The effect of powdered activated carbon, aeration rate, and external organic material loadings on the treatment efficiency and filtration performance were investigated in sequencing batch reactor, in which a flat-sheet type microfiltration membrane with a pore size of $0.4{\mu}m$ was submerged. At the initial operation (within 54 days) MLSS concentration, and the removal efficiencies of COD, T-N, and T-P were increased with the increase of C/N ratio. After 89 days the removal efficiencies of COD, T-N, and T-P were 97.1%, 75.0%, and 48.3%, respectively. Suspended solid-free effluent was obtained by membrane filtration. The T-P removal was relatively low because of depending on the amount of excess sludge wasting. During the operation of MSBR with powdered activated carbon, the particle size of the sludge reduced by the increase of collision frequency and mixing intensity. In comparison with MSBR without powdered activated carbon, TMP of MSBR with that was significantly elevated.

• Macromolecular Research
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2002

Cure behavior of an epoxy resin was investigated at different cure temperatures (110, 120, 130, 140, and 150 $^{\circ}C$) and cure times in the presence of 2 wt% of an N-benzylpyrazinium hexafluoroantimonate (BPH) cationic catalyst by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The glass transition temperature ( $T_{g}$) and chemical conversion (x) at the different temperatures were determined from DSC thermograms. The $T_{g}$ and x vs. In time data were superposed up to $T_{g}$ = 10$0^{\circ}C$ and x = 0.70 by shifting horizontally at a reference temperature of $T_{g}$ = 13$0^{\circ}C$. It is interesting that the $T_{g}$ and x of the superposed data increase rather slowly in the early stage of cure and rapidly thereafter. Therefore, the increase of the $T_{g}$ and x can be divided into two regions; $R_{I}$= -18.4(= $T_{go}$ ) ~5$^{\circ}C$ and $R_{II}$ = 5 ~ 10$0^{\circ}C$ in $T_{g}$, and $R_{I}$ : 0~0.24 and $R_{II}$ : 0.24~0.70 in x. The $R_{I}$ is closely related to the initiation reactions between BPH and epoxy and between hydroxy group and epoxy in this epoxy/catalyst system. From the kinetic analysis of the $T_{g}$-shift, activation energy was 12.5 kcal/mol. The relationship between $T_{g}$ and x was also considered. The gelation and vitrification times for different cure temperatures were obtained from DMA curves.urves. DMA curves.urves.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.616-622
• /
• 2020

Recently, as the interest in power saving increases with the development of IoT technology, research on power saving of smart devices, which are being miniaturized, is being actively conducted. In particular, due to the diversification of IoT-based smart devices and the increase in personal penetration rate, the issue of standby power even when not in use is increasing. However, there is a drawback of physically unplugging the outlet or turning off the power in order to substantially reduce standby power. Since Zigbee is used instead of the existing IP, it is necessary to change to the IoT standard protocol based on the Internet network. Therefore, this paper designed and implemented the standby power saving system applying CoAP, the IoT standard protocol, to the existing Zigbee technology. Existing systems and evaluations confirmed that the average standby power of about 8.4Wh was reduced.

• Journal of Industrial Convergence
• /
• v.22 no.8
• /
• pp.73-83
• /
• 2024

The study attempted to examine the effects of hybrid simulation practice program on critical thinking disposition, self-efficacy, communication competency, and clinical competency of nursing students. The study was one group pre-test and post-test design. Data were collected between April 24 to May 5, 2023 from 35 nursing students. The collected data was analyzed using the SPSS 25.0 program, frequency analysis, mean, standard deviation, and paired t-test. Research results showed that nursing students' critical thinking disposition(t=7.01, p<.001), self-efficacy(t=2.17, p=.037), communication competency(t=2.70, p=.011), and clinical competency(t=6.60, p<.001) were improved after the simulation program. The hybrid simulation practice program is significant in that it applies various learning tools, including high-fidelity-low-fidelity-role play to strengthen the connection between nursing students' theory and practice.

• The Korean Journal of Nuclear Medicine
• /
• v.3 no.2
• /
• pp.33-38
• /
• 1969

The serum thyroxine levels were measured by method of Tetrasorb Kit in 69 subjects including 13 subjects in euthyroid state, 31 with hyperthyroidism, 5 with hypothyroidism, 13 with nontoxic diffuse goiter, and 7 with nontoxic nodular goiter. Three parameters of the thyroid function test including thyroxine ($T_4$) levels, $^{131}I$ uptake (24 hrs) values and $PB^{131}I$ conversion ratio were correlated with clinical manifestations and courses of the disease. 1. The serum $T_4$ levels in the normal subjects were in range of $6.0{\mu}g/dl\;to\;14.4{\mu}g/dl$. (The mean $9.4{\mu}g/dl$). 2. The diagnostic compatibility of the serum $T_4$ was 93.5% in hyperthyroidism, 100% both in hypothyroidism and in nontoxic diffuse goiter, 86% in nontoxic nodular goiter, or 95.8% in the entire series. (Table 1). 3. The diagnostic compatibility of $^{131}I$ uptake (24 hrs) values and $PB^{131}I$ conversion ratio were less than the serum $T_4$ levels as summarized in Tables 2 & 3. The serum $T_4$ determination by Tetrasorb Kit is a simple, accurate and very useful test of the thyroid function.

• Steel and Composite Structures
• /
• v.24 no.4
• /
• pp.409-423
• /
• 2017

This paper presents an experimental study on damage evolution laws of solid-web steel reinforced concrete (SRC) T-shaped columns along the direction of the web under various loadings. Ten specimens with a scale ratio of 1/2 and a shear span ratio of 2.5 were designed and fabricated. The influences of various parameters, including the axial compression ratio, steel ratio, and loading mode, were examined. The mechanical performances including load-displacement curve and energy dissipation capacity under the monotonic and low cyclic loadings were analyzed. Compared with the monotonic loading, bearing capacity, ultimate deformation capacity, and energy dissipation capacity of the specimens decrease to some extent with the increase of the displacement amplitude and the number of loading cycle. The results show that the damage process of the SRC T-shaped column can be divided into five stages, namely non-damage, slight-damage, steadily-developing-damage, severe-damage and complete-damage. Finally, based on the Park-Ang model, a modified nonlinear damage model which combines the maximum deformation with hysteretic energy dissipation is proposed by taking into account the dynamic influence of the aforementioned parameters. The results show that the modified model in this paper is more accurate than Park-Ang model and can better describe the damage evolution of SRC T-shaped columns.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.159-165
• /
• 2019

About 58% of fires are electric fires. In this study, we analyzed the factors of fire caused by electricity and studied the system that can prevent fire in advance. In order to prevent disasters, basically, various electrical IoT sensors are needed to detect fire signs. Each of these sensors continuously receives a lot of situation information and sends it to the main system. The collected big data continuously checks whether the disaster is over the threshold that can cause disaster through pattern analysis, and can check whether there is any problem by comparing the data. In the event of a threshold, alarms are signaled and problems are reported. This prevents fire by preventing electrical problems such as overcurrent and leakage current.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.371-375
• /
• 2018

Objectives: To successfully introduce an Internet of Things (IoT) system in the hospital environment, this study aimed to identify issues that should be considered while implementing an IoT based on a user demand survey and practical experiences in implementing IoT environment monitoring systems. Methods: In a field test, two types of IoT monitoring systems (on-premises and cloud) were used in Department of Laboratory Medicine and tested for approximately 10 months from June 16, 2016 to April 30, 2017. Information was collected regarding the issues that arose during the implementation process. Results: A total of five issues were identified: sensing and measuring, transmission method, power supply, sensor module shape, and accessibility. Conclusions: It is expected that, with sufficient consideration of the various issues derived from this study, IoT monitoring systems can be applied to other areas, such as device interconnection, remote patient monitoring, and equipment/environmental monitoring.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.1
• /
• pp.18-22
• /
• 2022

The effect of electron beam (EB) irradiation on superconducting properties and microstructures of MgB₂ bulk superconductors were investigated. At E-beam doses of 1×10¹⁶ e/cm² and 1×10¹⁷ e/cm², the effect of irradiation on a superconducting transition temperature (T_c) of MgB₂ was weak. As a dose increases to 5×10¹⁷ e/cm², T_c decreases by 0.5 K. The critical current density (J_c) measured at 4.2 K and 20 K, and 0 T - 5 T increases slightly as exposure time increases. X-ray diffraction for the irradiation surface of MgB₂ shows that the diffraction intensity of (hkl) peaks decreases proportionally as the exposure time increases. This indicates that the crystallinity of MgB₂ was degraded by irradiation. TEM investigation for the irradiated sample showed distorted lattice structure, which is consistent with the XRD results. The J_c increase and T_c reduction of MgB₂ by irradiation are believed to be caused by the lattice distortion.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.25-35
• /
• 2014

Tremella fuciformis produces white jelly fruitbody which is used as a special food in the orient. Symbiotic relationship between T. fuciformis and Hypoxylon sp. is important for mass production of fruitbody in T. fuciformis. T. fuciformis showed the peak of 24mg/2mL on the 9th day, after that mycelial growth maintained a gentle curve. Protein content increased into 0.69㎍/mL in rapid, T. fuciformis fruiting body maintained high galactose, mycelia of T. fuciformis showed 42.6% trehalose.