• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권10호
• /
• pp.703-711
• /
• 2017

Today, men's appearance is an important part of the global fashion industry, including Korea, with such fashion concepts as the Metrosexual and Ubersexual. Domestic and overseas beauty and cosmetics related organizations are using this phenomenon for marketing and researching to improve the function of cosmetics. The purpose of this study was to investigate the effect of Prunus persica L. Batsch leaf extract on the skin condition after clinical application to male subjects with oily skin to determine the possibility of functional cosmetics utilizing this extract. The cleansing bars were prepared by the MP method and the cleansing packs were prepared using natural ingredients. After 8 weeks of application, moisture, oil, erythema, melanin, pH, elasticity and tactile sensation were measured using MPA5. The results showed that there was a statistically significant difference in T-zone moisture and T-zone oil after using the natural cleansing bar, but there was no significant difference between the two groups for other items. However, the statistically significant changes were found in the individual skin condition change items of the subjects in each group, and it was judged that the two kinds of formulations could be used at the same time to have a higher skin improvement effect. Thus, Prunus persica L. Batsch leaf extract demonstrates potential to be used as a functional cosmetics item.

• 콘크리트학회지
• /
• 제7권2호
• /
• pp.117-125
• /
• 1995

본 연구에서는 유조차의 추락으로 인해 화재를 입은 콘크리트 교각의 손상 정도에 대하여 조사하였다. 화재에 의한 콘크리트의 조직 변성 및 파손 깊이는 유한요소법으로 계산하여 현장 실측치와 비교분석하였고, 철근의 손상도는 인장시험을 통하여 파악하였다. 유한요소법에 의한 계산에서는 콘크리트의 열 전달 계수 ${\alpha}=2000Ｗ/m^2{\cdot}K$ 콘크리트의 초기 온도 $T_0=5^{\circ}C$ 그리고 화재 지속 시간 t=30분으로 고정하였고, 화재 온도 $T_a=500~800^{\circ}C$로 변화시켰다. 계산 결과 콘크리트 조직 변성 깊이는 1.5~4.1cm 그리고 압축 파열 깊이는 8.7~10.1cm로서 각각 실측치인 2~4cm 및 8~10cm와 근접한 결과를 얻었다. 그리고 화재후 철근의 인장강도는 별 손실이 없는 것으로 나타났다.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권2호
• /
• pp.16-27
• /
• 2003

해상에 유출된 유류의 생물정화방법은 자연상태로 존재하고 유류분해능력이 있는 박테리아, 균류 또는 효모와 같은 토착미생물의 환경요인을 최적화하거나, 병원성 또는 유전자조작미생물을 제외한 특별한 환경정화능력을 가진 미생물을 오염된 지역에 투입하여 유류오염물질을 자연적으로 분해함으로써 오염된 환경을 원래의 상태로 회복시키는 기술이다. 현재 우리나라규정에는 해양오염사고시 생물정화제제를 사용할 수 있는 제도적인 근거가 마련되어 있지 않아 실제사용 뿐만 아니라 관련 기술개발에 있어 많은 제약이 따르고 있다. 본 연구에서는 생물정화제제의 개발과 활용을 위해 관련규정에 대한 법률적 개정방향을 제시하였고 사람의 건강과 생태계의 유해한 성분을 포함하고 있는지 혹은 발생가능성이 여부를 확인하기 위하여 4단계의 생물정화제제 성능시험방법, 검정기준 및 형식승인절차를 제시하였다. 1, 2단계의 절차를 통해 생물급성독성 및 유류분해성능을 평가하여 형식승인을 여부를 결정하고 3, 4단계 절차를 통해 현장적용 가능성을 평가하는 단계로 구분하였다.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.140-146
• /
• 2005

Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.

• 미생물학회지
• /
• 제7권2호
• /
• pp.57-62
• /
• 1969

The experiments attempted to basic studies on the atmospheric dioxide in Korea and on the elimination of sulfur in oil Thiobacilli in order to control of atmospheric sulfur dioxide. The results of experiments are following as : 1) Content of atmospheric sulfur dioxide in industrial zone which used kerosene for fuel was 0.092 ppm(average) and 0.16ppm(maximum). 2) Content of sulfur dioxide at room air which used briquet for stove fire was 0.44ppm (average) adn 0.50 pp,(maximum). 3) Thirteen strains of thiobacilli were isolated from Korean soil and sewage and they were identified with T. thiooxidans (5strains), T. thioparus(3strains), T.ferrooxidans 3 man's observation and the description in Bergey's manual. 4) Two promising strains, one of T. thiooxidans and one of T. ferooxidans. were selected for elimieation of in kerosene.

• 대한한의학회지
• /
• 제40권2호
• /
• pp.133-141
• /
• 2019

Objectives: The condition of the skin is greatly influenced by seasonal changes. We wanted to know the seasonal change of skin condition and to find out the difference in the efficacy of Seoshiokyongsan (SSOOS) CP soap in spring and autumn. We are to help people who use soap to make a wise choice in choosing a cleanser according to the season. Methods: To investigate the seasonal skin condition, this experiment was conducted to examine the skin condition of spring and autumn in 20 students at A university. To compare the seasonal efficacy of Seosiokyongsan (SSOOS) CP soap, we had skin test 10 students in spring and autumn. We made herbal fermented soaps using SSOOS and distributed them to experiment participants. We let them wash their face in the morning and evening for 6 weeks using herbal fermented soap. Prior to the experiment, their skin condition was checked and assessed using A-ONE Smart One-Click Automatic Facial Diagnosis System three times at 3-week intervals. After the experiment, the changes of skin were measured and analyzed through facial analysis test. Results: In spring and autumn, the oil of T zone and U zone was significantly less and the water content was significantly higher in autumn than in spring. In the case of using the SSOOS CP soap, water content increased and oil content decreased in spring, oil content and elasticity increased in autumn. Conclusion: There is a difference in the skin condition according to the season and SSOOS CP soap showed difference in efficacy in spring and autumn. So we should pay attention to seasonal soap selection.

• 한국표면공학회지
• /
• 제43권5호
• /
• pp.230-237
• /
• 2010

FTMP(friction thermo-mechanical process) is an adaptation of friction stir welding, and can be used as a generic process to modify the microstructure at selective locations. In this study, in order to analyze characteristics of surface modification of ACA4 castings by FTMP, change of rotating speed(R/S) and traveling speed(T/S) of tool were applied as conditional parameter. Analysis of microstructure, hardness, surface roughness and depth of modified zone(MZ) were searched. The best condition were obtained at R/S 600 rpm and T/S 100 mm/min. At this time, hardness was 82 HV, the surface roughness was 0.07 mm and the depth at MZ was 1.72 mm. Free defects microstructure and fine Si particles formation and strong forging effects were analyzed at MZ.

• Toxicological Research
• /
• 제29권3호
• /
• pp.187-193
• /
• 2013

The effects of toluene in dimethylformamide (DMF)-induced hepatotoxicity were investigated with respect to the induction of cytochrome P-450 (CYP) and the activities of related enzymes. The rats were treated intraperitoneally with the organic solvents in olive oil (Single treatment groups: 450 [D1], 900 [D2], 1,800 [D3] mg DMF, and 346 mg toluene [T] per kg of body weight; Combined treatment groups: D1+T, D2+T, and D3+T) once a day for three days, while the control group received just the olive oil. Each group consisted of 4 rats. The activities of the xenobiotic metabolic enzymes and the hepatic morphology were assessed. The immunoblots indicated that the expression of CYP2E1 was considerably enhanced depending on the dosage of DMF and the CYP2E1 blot densities were significantly increased after treatment with both DMF and toluene, compared to treatment with DMF alone. The activities of glutathione-S-transferase and glutathione peroxidase were either decreased or remained unaltered after treatment with DMF and toluene, whereas the lipid peroxide levels were increased with increasing dosage of DMF and toluene. The liver tissue in the D3 group (1,800 mg/kg of DMF) showed signs of microvacuolation in the central vein region and a large necrotic zone around the central vein, in rats treated with both DMF (1,800 mg/kg) and toluene (D3T). These results suggest that the expression of CYP2E1 is induced by DMF and enhanced by toluene. These changes may have facilitated the accelerated formation of N-methylformamide (NMF) from toluene, and the generated NMF may directly induce liver damage.

• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

• 유공압시스템학회논문집
• /
• 제2권1호
• /
• pp.9-14
• /
• 2005

Hydraulic excavators have been popular devices in construction field because of its multi-workings and economic efficiency. The mathematical models of excavators have many nonlinearities because of nonlinear opening characteristics and dead zone of main control valve, oil temperature variation, etc. The objective of this paper is to develop a simulator for hydraulic excavator using AMESim. Components and whole circuit are expressed graphically. Parameters and nonlinear characteristics are inputted in text style. The simulator can be used to forecast excavator behavior when new components, new mechanical attachments, hydraulic circuit changes, and new control algorithm are applied. The simulator could be a kind of development platform for various new excavators.