• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.211-212
• /
• 2014

기존의 단방향 동작만 고려한 인버터에서 반송파 기반 PWM 방식의 중성점 전압 제어기법을 양방향 동작의 인버터에 그대로 적용할 경우 역방향 동작에서 중성점 전압이 오히려 벌어지는 문제가 있다. 본 논문에서는 구현이 간단한 반송파 기반 PWM 방식의 중성점 전압 제어기법을 양방향 인버터에 적용하여 인버터의 전류 방향에 상관없이 하나의 제어기로 구현된 제어기법을 제안한다. 제안하는 기법은 양방향 모드전환 시에도 끊김없는 제어가 가능하고 초기 동작과 무부하 동작에서도 중성점 전압의 불평형을 제거할 수 있다. 양방향 T-type 인버터를 제작하여 본 논문에서 제안한 제어기법을 검증 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.199-200
• /
• 2015

The paper describes the development of Fast Charger by using Vienna Rectifier as AC/DC converter. The Vienna Rectifier is proven to have a high efficiency performance as well as a prominent power quality performance on AC side of the fast charger. The Vienna Rectifier is compared to other topology, especially T-type inverter, and analyzed carefully. Experimental results from a 10kW prototype are provided to validate the theoretical consideration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.13-14
• /
• 2010

본 논문에서는 경계 모드(Critical Mode) 플라이백 타입의 DC-AC 인버터에 인터리빙을 적용한 디지털 제어를 제안한다. 연속모드(CCM)나 불연속모드(DCM)와 달리 경계 모드의 경우 주파수가 가변되기 때문에 인터리빙으로 구현하기는 상당히 까다로운 측면이 있다. 또한 아날로그 제어기로 구현에 한계를 지니기 때문에 보다 간편한 구현을 위해 디지털 제어IC을 이용하여 구현하는 방법에 대해 기술한다. 본문에서 200W급 플라이백 타입의 DC-AC 인버터에 경계모드 인터리빙을 방법을 적용한 후 실험으로 검증한다.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.105-110
• /
• 2019

This study proposed a reactive power variation (RPV) method equipped with positive feedback (PF) for detecting the islanding operation of distributed generation systems. The proposed RPV consists of the constant reactive power component and a certain reactive power term and uses the frequency deviation between the rated and the measured frequencies. The constant reactive power is injected from distributed generation system and power factor is to 0.9975 in grid-connected operation. PF is activated from generation of the frequency deviation and the injected reactive power is continuously increased due to PF when islanding occurs. Consequently, the increasing reactive power causes the point of common coupling frequency to deviate from the maximum/minimum threshold level. Performance of the proposed RPV is verified in a 1.7 kW T-type inverter, and the detection times are 53 and 150 ms.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.221-227
• /
• 2022

The reliability improvement of PV systems is an important factor in reducing the cost of PV energy because it is closely related to the annual energy production as well as the maintenance cost of PV systems. The reliability of PV inverters plays a key role in the reliability of PV systems because it is regarded as one of the most reliable critical parts of PV systems. The lifetime evaluation of PV inverters considering the mission profile in the design phase plays an important role in reliability design to ensure the required lifetime of PV inverters. In this paper, the lifetime of representative single-phase T-type and I-type NPC inverters are comparatively evaluated by considering the mission profile of a PV system recorded at Iza, Spain. Furthermore, the effect of the pulse width modulation methods on the lifetime is also discussed. The lifetime evaluation of PV inverters is performed at the component-level first and then the system level by considering all power devices.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2018-2030
• /
• 2015

A two stage ac drive configuration consisting of a single-phase line commutated rectifier and a three-phase voltage source inverter (VSI) is very common in low and medium power applications. The deterministic pulse width modulation (PWM) methods like sinusoidal PWM (SPWM) could not be considered as an ideal choice for modern drives since they result mechanical vibration and acoustic noise, and limit the application scope. This is due to the incapability of the deterministic PWM strategies in sprawling the harmonic power. The random PWM (RPWM) approaches could solve this issue by creating continuous harmonic profile instead of discrete clusters of dominant harmonics. Insufficient filtering at dc link results in the amplitude distortion of the input dc voltage to the VSI and has the most significant impact on the spectral errors (difference between theoretical and practical spectra). It is obvious that the sprawling effect of RPWM undoubtedly influenced by input fluctuation and the discrete harmonic clusters may reappear. The influence of dc link fluctuation on harmonics and their spreading effect in the VSI remains invalidated. A case study is done with four different filter capacitor values in this paper and results are compared with the constant dc input operation. This paper also proposes an ingenious RPWM, a ripple dosed sinusoidal reference-random carrier PWM (RDSRRCPWM), which has the innate capacity of suppressing the effect of input fluctuation in the output than the other modern PWM methods. MATLAB based simulation study reveals the fundamental component, total harmonic distortion (THD) and harmonic spread factor (HSF) for various modulation indices. The non-ideal dc link is managed well with the developed RDSRRCPWM applied to the VSI and tested in a proto type VSI using the field programmable gate array (FPGA).

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.953-965
• /
• 2023

The stratospheric drones are developed to perform missions such as weather observation, communication relay, surveillance, and reconnaissance at 18km to 20km, where climate change is minimal and there is no worry about a collision with aircraft. It uses solar panels for daytime flights and energy stored in batteries for night flights, providing many advantages over existing satellites. The electrical and power systems essential for stratospheric drone flight must ensure reliability, efficiency, and lightness by selecting the optimal circuit topology. Therefore, it is necessary to analyze the circuit topology of various types of multi-level inverters with high redundancy that can ensure the reliability and efficiency of the motor driving power required for stable long-term flight of stratospheric drones. By quantifying the switch element voltage drop and the number and weight of inverter components for each topology, we evaluate efficiency and lightness and propose the most suitable circuit topology for stratospheric drones.

• 한국전자파학회논문지
• /
• 제19권12호
• /
• pp.1462-1469
• /
• 2008

본 논문에서는 VHF($169{\sim}211\;MHz$)용 대역 통과 여파기의 소형화와 향상된 차단 대역 저지 특성을 구현하기 위하여, 기존의 Right-Handed 전송선에 Left-Handed 특성을 가미한 복합 구조를 이용하여 설계하였다. 대역 통과 여파기를 CRLH의 0차 공진기의 공진점을 사용하고 공진 기간의 결합을 인버터 이론으로써 구현하였다. 제안된 기법의 타당성은 예측 특성과 실험 결과로써 확인되며(삽입 손실<2 dB, $S_{11}$<-15 dB, 3체배 차단 특성), 평행 결합 선로형 여파기와 같은 기존 기술의 여파기보다 약 60 %의 소형화가 이뤄짐을 알 수 있었다.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.399-407
• /
• 2021

본 논문에서는 계통망 사업자의 High Voltage Ride-Through(HVRT) 기능 요구조건을 만족하며, 정상상태에서의 손실을 최소화할 수 있는 Type 4 풍력발전기의 직류단 전압 설계 방법을 제안한다. 대용량 해상 풍력 발전에 사용되는 Type 4 풍력발전기는 전력 계통과 연계된 컨버터와 풍력 발전기와 연계된 컨버터가 직류단을 공유하는 Back-to-Back 컨버터 형태이다. Type 4 풍력발전기에서 HVRT 조건인 계통 고전압 사고가 발생한 경우 사고 전압 크기에 비해 직류단 전압이 부족하다면 과변조로 인해 계통측 컨버터의 전류 제어기가 원활하게 동작되지 못한다. 따라서 HVRT 기능을 만족하기 위해서는 고전압 사고의 전압 크기를 기준으로 직류단 전압을 설계해야 한다. 그러나 직류단 전압의 크기의 증가는 정상상태에서의 컨버터 손실 증가를 야기하므로, 직류단 전압을 크게 설계하였을 때 증가될 손실에 대한 고려가 포함되어야 한다. 본 논문에서는 사고 전압의 크기와 발생 손실이 고려된 직류단 전압을 설계하는 방법에 대해 설명하고, 제안하는 설계 방법의 타당성을 2MVA급 Type 4 풍력발전기의 PSCAD 모델 기반 HVRT 기능 시뮬레이션을 통해 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.461-466
• /
• 2003

This paper presents the speed control of the surface-mounted permanent-magnet synchronous motors (SMPMSM) for the elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA (EPF10K10-Tl144-3) to design compactly and Inexpensively The proposed scheme is verified through digital simulation and experiments for a three-phase 13.3kW SMPMSM as a MRL(MachineRoomless) elevator motor ill the laboratory. Finally, experiment of the test tower was performed with a 48kW PWM converter-inverter system for a high- speed elevator .