• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.268-277
• /
• 2019

Flight test systems should monitor various conditions in real time during flight tests and take safety measures in an emergency. The importance of ensuring test safety increases in more complicated and wider test environments. Also, due to the transition of wartime operational authority, many guided missile systems must be developed simultaneously. Early deployment and budget reduction by shortening the development and T&E periods are also necessary. Consequently, the risk of flight tests under the circumstance of inefficient test resources is increasing. To address this deficiency, a flight test system model using SysML was proposed in this study. The method of designing and verifying the test system is based on the agile shift left testing methodology of advanced T&E labs and utilizing a system reference model in the aerospace field. Through modeling and simulation analysis, early identification and correction of faults resulting from inconsistent test requirements can mitigate the risk of delays during the T&E phase of flight tests. Also, because the flight test system model was constructed using SysML, it can be applied to test various guided missile systems.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.70-75
• /
• 2009

In this experiment, we did sampling 6 kinds of photovoltaic modules and analyzed the discrepancy of measurement results between l laboratory and 4 PV makers to have performance repeatability at Standard Test Condition(STC) condition. From the KIER's results, Korea's standard test laboratory, other laboratory showed -10% measurement variation. The causes came from correction of reference cell, test condition and the state of skill. Form the comparison test, we analyzed the problems. But three PV maker reduced measurement variation, other one PV maker and one test laboratory didn't improve the problems of correction of reference cell, test condition and the state of skill. Also, High Efficiency Module had a big discrepancy of -10.0$\sim$-6.2% among 3 laboratories which have a less than 10msec light pulse duration time. This made low spectrum response speed so the Fill Factor decreased maximum output power under 10msec light pulse duration time

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.375-385
• /
• 2015

The study is to develop specific strategies to prevent adolescents' depression, early detection and intervention services. This study was a descriptive research study with the purpose of predictors of protective factors for depression in adolescent using decision making tree analysis. The subjects for the study were 485 student in G city. This study collected data between September 23, 2013 and September 26, 2013 and analyzed them with frequency analysis, percentage, the mean and standard deviation, ${\chi}^2$-test, t-test, and a decision-making tree by using SPSS 20.0 program. From the data analysis, the predictive model for protective factors related to depression in adolescent with 4 pathways, 12 nodes. The common predicting variables of depression in adolescent were characteristics, family cohesion, parent adolescent communication, peer communication. The specialty of training data and test data was 76.0% and 65.4%. The sensitivity of training data was 78.2% and 63.7%. As for the classification accuracy, training data and test data explained 70.1% and 69.7%. Parent adolescent communication and peer communication to decrease depression of Korean middle and high school students are necessary. This study should contribute as baseline data for intervention strategies and planning ability of depression prevention in adolescents.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.226-231
• /
• 2001

The purpose of this paper is to propose the experimental method of thermal properties of Phase Change Materials (PCMs) by using T-history method. As far, in order to measure the heat of fusion and specific heat of PCMs, conventional thermal analysis methods such as DSC and DTA have been used. Because these methods test very small samples, thermal properties of samples are usually different from those of materials consisting of several components. For these reasons, T-history method, the simple measurement method of the heat of fusion and specific heat of PCMs have been performed. In this paper, we investigated the thermal properties of low temperature PCMs(below $0^{\circ}C$) under the charging process by using T-history method. The results are compared to those of DSC method. The T-history method will be useful for selection of the best PCM from lots of candidates and development of new PCMs.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.53-64
• /
• 1996

In this paper, rotating bending fatigue tests have been carried out to investigate the growth behabiors of surface fatigue crack initiated from a small artificial surface defect, that might exist in real structures, on 2024-T3 and 6:4 brass. The test results are analysed in the viewpoints of both strength of materials and fracture mechanics, it can be concluded as follows. The effect of a small artificial surface defect upon the fatigue strength is very large. The sensitivity of 2024-T3 on the defect is higher than that of 6:4 brass. The growth behavior of the surface fatigue crack of 2024-T3 is different from that of 6:4 brass. The growth rate of the surface fatigue crack of 2024-T3 is considerably rapid in the early stage of the fatigue life and apt to decrease in the later stage. It was impossible to establish a unifying approach in the analysis of crack growth begabior of 2024-T3 and 6:4 brass using the maximum stress intensity factor because of their dependence on stress level. But if the elastic strain and cyclic total strain intensity factor range were applied to obtain the growth rate of surface fatigue cracks of the materials, the data were found to be nearly coincided.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.255-261
• /
• 2020

As the accidents of cargo and passenger carrying ships occur, the stress faced by the vessel users is increasing. The risk factors for accident deterioration in remote marine area are stronger than those in road accidents, and therefore the need for safety control is greatly emphasized. To overcome such issue, a lot of effort has been made in terms of conducting research and development of the passengers and freights location tracking system. However, the inner bulkhead structures are made of aluminum/steel which is a difficult material to transfer location information through. This study aims to measure the receiving rate of LoRaWAN signal inside the aluminum/steel bulkhead structures with variation in reception strength and distance. The test was taken place at platforms with 6T and 8T enclosures to reflect the same conditions found in fishery patrol boats. The receiving rate of through-the-wall communication at 10M distance turned out to be 86% in case of using two 6T enclosures, and 73% in case of using one 8T enclosure. The result showed that the receiving rate was more affected by the thickness rather than the number of enclosures.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.229-239
• /
• 2022

Today's Internet of Things (IoT) has had a dramatic increase in the use of various daily aspects. As a consequence, many homes adopt IoT technology to move towards the smart home. So, the home can be called smart when it has a range of smart devices that are united into one network, such as cameras, sensors, etc. While IoT smart home devices bring numerous benefits to human life, there are many security concerns associated with these devices. These security concerns, such as user privacy, can result in an insecure application. In this research, we focused on analyzing the vulnerabilities of IoT smart home cameras. This will be done by designing a new model that follows the STRIDE approach to identify these threats in order to afford an efficient and secure IoT device. Then, apply a number of test cases on a smart home camera in order to verify the usage of the proposed model. Lastly, we present a scheme for mitigation techniques to prevent any vulnerabilities that might occur in IoT devices.

• The Journal of Korean Medicine
• /
• v.43 no.2
• /
• pp.27-41
• /
• 2022

Objectives: There should be an objective analysis on the academic competency for incorporating Computer-based Test (CBT) in the education of traditional Korean medicine (TKM). However, the Item Response Theory (IRT) for analyzing latent competency has not been introduced for its difficulty in calculation, interpretation and utilization. Methods: The current study analyzed responses of 390 students of 8 years to the herbology test with 14 items by utilizing Rasch model, and the characteristics of test and items were evaluated by using characteristic curve, information curve, difficulty, academic competency, and test score. The academic competency of the students across gender and years were presented with scale characteristic curve, Kernel density map, and Wright map, and examined based on T-test and ANOVA. Results: The estimated item, test, and ability parameters based on Rasch model provided reliable information on academic competency, and organized insights on students, test and items not available with test score calculated by the summation of item scores. The test showed acceptable validity for analyzing academic competency, but some of items revealed difficulty parameters to be modified with Wright map. The gender difference was not distinctive, however the differences between test years were obvious with Kernel density map. Conclusion: The current study analyzed the responses in the herbology test for measuring academic competency in the education of TKM using Rasch model, and structured analysis for competency-based Teaching in the e-learning era was suggested. It would provide the foundation for the learning analytics essential for self-directed learning and competency adaptive learning in TKM.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.87-96
• /
• 2002

The strain holding test(SHT) or the sell-boring pressuremeter test(SBPT) has been effectively utilized to determine the horizontal coefficient of consolidation$(c_h)$ of clayey soils. However, a commonly used procedure proposed by Clarke et al.(1979) can lead to an erroneous estimation of $(c_h)$ because of its simplified assumptions. This paper deals with numerical analyses based on realistic test conditions of the generally accepted testing procedure, and .using the most commonly used type of pressuremeter. The effects of pressuremeter geometry, partial drainage during cavity expansion, and the cavity strain level for the holding test are investigated with the radial distributions of the initial excess pore pressure and their dissipation rate. Based on the results of the numerical analyses, the curve of the time factor for the 50% degree of consolidation($T_{50}$) needed to estimate $(c_h)$ is proposed. Comparisons are made between $(c_h)$ values estimated from the SHT or the SBPT and those obtained from other in situ and laboratory tests performed at two sites in Korea. These results suggest the improved capability of the $T_{50}$ curve proposed herein.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.4
• /
• pp.111-120
• /
• 2022

Objective: This study investigated the effect of pelvic tiltng according to the paralytic side on gait in stroke patients during a 10 m functional movement timed up and go (TUG) test. Method: In this study, gait parameters were measured using a gait analyzer for 20 stroke patients and their gait was analyzed during a 10 m TUG test. For statistical analysis, an independent sample t-test were performed for age, height, and weight among general characteristics of subjects and homogeneity was tested by performing a chi-square test for gender, paralysis side, period of onset, and K-MMSE score. In order to understand the relationship between each variable, Pearson correlation analysis was performed on the variables. Results: First, the right-hand paralyzed group showed correlations in cadence and gait velocity in the up and down tilt of the pelvis, and the left-hand paralyzed group showed correlations in cadence and step length in the anterior and posterior tilt of the pelvis. Second, the tilt of the pelvis was correlated with the Sit to stand, walk forward, walk backwards, turn around at the end point, sit on a chair and the total TUG time in the right hemiplegic group compared to the left hemiplegic group. Conclusion: In this study, a significant correlation was confirmed as a result of gait analysis of right-handed stroke patients divided into a right paraplegic group and a left paraplegic group. In the future, it is suggested that treatment for improving gait of stroke patients should be treated differently for the right and left paralyzed side.