• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.206-214
• /
• 2014

This study is to evaluate how different bearing surface angles of abutment screw affect the mechanical stability of the joint in the conical seal design implant system. Materials and Methods: Internal connection type regular implants, two-piece cemented type abutments and tungsten carbide/carbon-coated titanium alloy abutment screws were selected. Titanium alloy screws with conical ($45^{\circ}$) and flat ($90^{\circ}$) head designs which fit on to abutment were fabricated. The abutments were tightened to implants with 30 Ncm by digital torque gauge. The loading was applied once to the central axis of abutment. The mean axial displacement was measured using micrometer before and after the tightening and loading (n = 5). The abutment was tightened to implants with 30 Ncm and T-shape stainless steel crown was cemented. Then the change in the amount of reverse-torque was measured after the repeated loading to the central axis, and the place 5 mm away from the central axis. Compressive bending and fatigue strength were measured at the place 5 mm away from the central axis (n = 5). Results: Both groups showed the largest axial displacement when abutment screw tightening and total displacement was greater in the flat head group compared to conical head group (P < 0.05). However, there were no significant differences in reverse torque value, compressive bending and fatigue strength (P > 0.05). Conclusion: Within the limitations of this study, the abutment screw head design had no effect on two groups regarding the joint stability, however the conical head design affected the settlement of abutment resulting in the reduced total displacement.

• Composites Research
• /
• v.13 no.4
• /
• pp.42-53
• /
• 2000

A study has been made to establish an optimum condition in the surface treatment and curing method that is important for the fabrication of Al 7075/CFRP laminates. PAA(Phosphoric Acid Anodizing) provided a good adhesive strength and FPL(Sulfuric / Sodium Dichromate Acid Etching) had a similar adhesive strength with PAA. On the other hand, the poor adhesive strength was shown on vapor degrease and CAA(Chromic Acid Anodizing). By using the atomic force microscope(AFM), it was found that the PAA oxide surface obviously had a greater degree of microroughness as compared to vapor degrease, CAA and FPL treated surfaces. These results support the concept of a mechanical interlocking of the adhesive with-in the oxide pores as the predominant adhesion mechanism. In curing methods, the adhesive strength of co-curing method was higher than that of secondary curing method. With respect to stability of specimen shape, the secondary curing method was better than co-curing method. DMA(Dynamic Mechanical Analysis) test revealed $T_g$ in curing times over 60 min is nearly same, so it is estimated they will have similar degree of curing and joint durability in using FM300M adhesive film.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.2
• /
• pp.20-50
• /
• 2000

This paper was written into condsideration records about the definition of "Ong-Jeo", the difference between "Ong" and "Jeo", the Western medical approach to "Ong-Jeo", and the etiology and pathologic mechanism of "Ong-Jeo". After this study, I report the following results from it. 1. "Ong" is an acute diapyesis disease which is found is in our skin and muscle and flesh. The chrateristics of this disease is that the affacted site is shine, no head, and the size is 3-4 chon. The prossess of the diesease shows that it is very quick, and very easily swell, and becomes pus easily, easily become to ulcer, easily converge. But this don't damage to the muscle and bone. 2. "Jeo" is the disease which damages bone-skeleton, muscle and flesh, and even destroy the stationary tissue. Jeo can be divided into two. One is called "Yudujeo" and it is acute diapydesis disease. The characteriscs of this disease is the miliary abscess, swell, has fever, and has an ache which is feeled spaned. And this is diffused into periphrey tissue and is diffused into deep site. After the ulcer, this becomes to shape the cellula. The size is more than 3-4 chon and this disease goes into chuk if this is serious. The other one is called "Mudujeo" and this disease is the ulcerative one in our joint and skeleton. The characteristic of this disease shows that the color of skin be not changed, and swell diffusely, and is not easily vanished, not easily becomes ulcerative, and not easily becomes converged. 3. "Ong-Jeo" is caused by the bacteriunm named by the "Golden and Yeollw Staphylococcus" in the Western medicine. "Ong" can be applicable to the carbuncle, acute diapyesis lymphadenitis, and some of cellulitis. "Jeo" can belong to cellulitis, and Mudujeo can belong to suppurative arthritis, suppurative osteomyelitis, tuberculous arthritis and osteomyelitis, and tuberculous lymphadenitis. 4. The etiologies of "Ong-Jeo" can be divided three, which are internal, external and other etiology which can not be clasiffied by two etiologies above. The internal etiology is seven emotion, and the external etiology is the six eumsa, unki, chunhang and so on. Other etiology is inadequate absorption of food, and excessive bang-sa. 5. The etiology of "Ong" is suppurative one which is choked between our skin and muscle and flesh, and is congested, become to hot, and finally erodes the muscle and flesh because of the inbalance of cirrculation in the enegy and blood. "Jeo" is the same as the Ong, but this is the suppurative disease which damages the muscle, flesh, and skeleton, and even damages into five Zang, the internal intestine.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.59-64
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.172-182
• /
• 2002

Objectives: We did research in the cause of the Pitchers' injury and their recovery process to make a detailed injury list for the purpose of finding the cause of the Korean professional pitchers' injury and its classification. We drew the conclusion through the results as following. Methods: We posed a question to the 80 pitchers playing in the first team of the eight Korean professional baseball team and analyzed the 62 pieces of question paper except the paper having a mistake. We used SAS/PC statistical package in analyzing the data. Results: In the frequency of the pitchers' shoulder injury in the last three years, the injured of all the players were 61.3$\%$ and the injury free players were 28.7$\%$. The cause of the injury was 45.2$\%$ wrong pitching motion, which was the highest value. For the shape of a pain when injured, the reverberation ache feeling when he is hit in the weight commanded an absolute majority as 19.4$\%$. Those who had muscular pain were 17.7$\%$, which was felt mostly at the pitching motion. The most trouble name of the injured shoulder was bicepstendinitis as 16.1$\%$ while the injury of shoulder joint was the lowest as 1.6$\%$. As the most widely used treatment, 25.8 percent of all the players had taken an electronical thraphy after injury. 14.5 percent of the players who had an injury to the shoulder told that they have an operation and 85 percent of them didn't. As a sort of the operation, a repairing of labrum was 44.4 percent, which is the highest value and the 77.8 percent pitchers are performing a normal pitching through rehabilitation after the operation and 22.2 percent of them are undergoing rehabilitation training. Conclusion: The research have shown that the main cause of the injury, concerning the Korean professional pitchers throwing lots of ball in both matches and practices, is overuse syndrome, bad mechanism, muscle weakness and instability of balance. I think that the role of trainer, physical therapy, and team physician taking charge of the players' injury must learn physical test method by heart exactly to check up the state of the injury definitely at the initial phase. Moreover, when the cause of the injury part after a close examination is discovered, the scientific and good surgery is essential to the rehabilitation success and making a classification of shoulder instability is useful to make a operation plan as well as the players' rehabilitation, treatment.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2009

Purpose: We wanted to report the clinical characteristics and arthroscopic findings of radial tear in medial meniscus posterior horn insertion, commonly occurs in patient over middle age with documentary review. Materials and Methods: Retrograde study using hospital records was done to 40 cases in 40 patients who visited our hospital and had been performed knee arthroscopic surgery due to medial meniscus posterior horn insertion tear between January, 2005 to April, 2007. Seven cases were male and 33 cases were female with the mean age of 61 (range, 47-80). Trauma history, stage of arthritis, period between pain and operation, MRI findings, clinical symptoms and operation methods were evaluated. Results : Six cases had trauma history while 34 cases didn't. In simple x-ray, using Kellgren-Lawrence classification, 31 cases were between stage 0 and II while 9 cases were stage III. In arthroscopic exam, there were 17 cases of Outerbridge grade IV, 4 cases of grade III, 9 cases of grade II, 9 cases of grade I. The mean duration of pain was 5.3 months. In MRI, at least one finding of cleft in axial or coronal view or ghost sign in sagittal view was found in all cases. The shape of meniscus tears were blunt in 18 cases, transverse in 12 and degenerative tear in 10. Subtotal meniscectomy was performed in 16 cases, partial meniscectomy in 10 cases and meniscal repair in 14 cases. Conclusion : Medial meniscus posterior horn insertion tear occurs in patients over middle age is rarely related to trauma history but causes painful mechanical symptom and usually accompany arthritis. Meniscectomy can be done for the treatment but repair can be considered is some cases. Further study on the treatment result will be needed.