• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.169-179
• /
• 1987

The change of material J-R (J-T) curve with crack extension and J-calculation method was investigated to give experimental and analytical method for reliable J-R (J-T) curve, which was adapted recently as a tool for instability analysis of Nuclear Pressure Vessel. Experiments were carried out by Single Specimen Unloading Compliance Method using 1/2"T, Compact-Tension Type fracture mechanic specimens which were the same size and material as domestic nuclear pressure vessel material surveillance specimens. The results revealed that crack extension up to 25~30% of initial uncracked ligament and JD (Deformation theory J) calculation method, currently being used in NUREG-0744, could give rather reliable material J-R (J-T) curve than the small crack extension and JM (Modified J) calculation method. But as JM results more or less higher J at instability, the application of JM should be considered regarding to the problem of power plant availability.lity.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.300-308
• /
• 2011

Purpose: The goal of reduction mammaplasty is breast with natural cone shape, minimizing scars, well-placed and sensate nipple-areolar area and maintaining breast physiology. In order to satisfy that goal, variable reduction mammaplasty methods are performed, however, two methods such as vertical reduction method and inverted T-scar method are currently most used. We compared indications and advantages of the two methods and set up useful guidlines. Methods: For 15 years from 1995 to 2010, we experienced 84 patients (162 breasts). We performed vertical reduction method as Lejour's superior pedicle technique (45 patients) and inverted T-scar method as Goldwyn's inferior dermal flap technique (39 patients). We evaluated the result of the operation comparing patient's age, amount of resected tissue, complications and post-operative scars of the two methods. Results: The mean age was 36 years and the vertical reduction group was 3 years younger than inverted T-scar group. The mean breast tissue resection amount per one breast, inverted T-scar group (712 gm) was lagger than vertical reduction group (395 gm). Conclusion: There is no ideal method for reduction mammaplasty until now. However, we suggest that guide line, the vertical reduction method is effective for minimal and moderate macromastia in young and middle aged women and inverted T-scar method is appropriate for severe macromastia with ptosis in elderly women. Recently, all procedures tried shorter and smaller scar on the vertical line as small I, J or L shape scar, and inframammary fold as short inverted T-scar.

• Journal of Food Hygiene and Safety
• /
• v.3 no.2
• /
• pp.65-73
• /
• 1988

T-2 toxin is one of mycotoxins produced by fungi such as Fusarium spp. and possesses a potent cytotoxicity to eukaryotic cell. The contamination of mycotoxins in cereals and feedstuffs is one of the great concerns in health authorities. Therefore, the development of the specific, sensitive and simplified analysis method for T -2 toxin is required. During more than ten years, several chemical and biological analysis methods were proposed and applied for the detection and quantification of T-2 toxin. TLC, GLC-FID and GC-MS are widely employed, but these methods required numerous clean-up procedures before analysis, and the detection limit for T-2 toxin is more than 10 ppb. Biological analysis methods with dermal tissues and cultured cells are not specific to T-2 toxin, since T-2 toxin and other related derivatives possess a similar toxicological activity although their relative activity is different each otber. Based on tbe specific reaction between antibody and antigen, the authors tried to introduce the immunochemical methods for determination of T-2 toxin. The enzyme-linked immunosorbent assay method using monoclonal antibody for T-2 toxin was applied to analyse T-2 toxin. The detection limit of T-2 toxin by ELISA method was 0.1 ppb. The correlation between ELISA and GC-MS method on these samples was very high. ELISA method developed for the detection and quantification of T -2 toxin in this paper possesses simplicity, high sensitivity and specific for T-2 toxin. Furthermore, the ELISA method with T-2 toxin monoclonal antibody was an excellent tool for the screening of Fusarium spp. which was suspected to produce T-2 toxin.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.263-272
• /
• 2017

The concept of Internet of Things (IoT) has been increasingly popular these days, and its areas of application have been broadened. However, if the data stored in an IoT system is damaged and cannot be recovered, our society would suffer considerable damages and chaos. Thus far, most of the studies on fault-tolerance have been focused on computer systems, and there has not been much research on fault-tolerance for IoT systems. In this study, therefore, a fault-tolerance method in IoT environments is proposed. In other words, based on the EVENODD method, one of the traditional fault-tolerance methods, a fault-tolerance storage and recovery method for the data stored in the IoT server is proposed, and the method is implemented on an oneM2M IoT system. The fault-tolerance method proposed in this paper consists of two phases - fault-tolerant data storage and recovery. In the fault-tolerant data storage phase, some F-T gateways are designated and fault-tolerant data are distributed in the F-T gateways' storage using the EVENODD method. In the fault-tolerant recovery phase, the IoT server initiates the recovery procedure after it receives fault-tolerant data from non-faulty F-T gateways. In other words, an EVENODD array is reconstructed and received data are merged to obtain the original data.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.23-35
• /
• 2017

With the popularization of mobile devices, the number of social network service users is increasing, thereby the amount of data is also increasing accordingly. As Internet of Things environment is expanding to connect things and people, there is information much more than before. In such an environment, it becomes very important to recommend the necessary information to the user. In this paper, we propose a recommendation method that considers new users in IoT environment. In the proposed method, we recommend the information by applying the centrality-based social network analysis method to the recommendation method using the social relationships in the social IoT. We describe the seven-step recommendation method and apply them to the music circle scenario of the IoT environment. Through the music circle scenario, we show that we can recommend more suitable information to new users in the IoT environment than the existing recommendation method.

• Computers and Concrete
• /
• v.17 no.1
• /
• pp.67-86
• /
• 2016

Strengthening as well as correcting unsightly deflections of reinforced concrete (RC) beam may be accomplished by retrofitting. An innovative way to do this retrofitting that is proposed in this study utilizes turnbuckle to apply external post-tensioning. This Turnbuckle External Post-Tensioning (T-EPT) was experimentally proven to improve the serviceability and load carrying capacity of reinforced concrete beams. The T-EPT system comprises a braced steel frame and a turnbuckle mechanism to provide the prestressing force. To further develop the T-EPT, this research aims to develop a numerical scheme to analyze the structural performance of reinforced concrete beams with this kind of retrofitting. The fiber method analysis was used as the numerical scheme. The fiber method is a simplified finite element method that is used in this study to predict the elastic and inelastic behavior of a reinforced concrete beam. With this, parametric study was conducted so that the effective setup of doing the T-EPT retrofitting may be determined. Different T-EPT configurations were investigated and their effectiveness evaluated. Overall, the T-EPT was effective in improving the serviceability condition and load carrying capacity of reinforced concrete beam.

• Journal of KIISE:Software and Applications
• /
• v.41 no.8
• /
• pp.545-556
• /
• 2014

Internet of Things (IoT), one of the emerging research areas, is the computing paradigm where various things connect to the network and cooperate with their neighbors to reach common goals. Computing with IoT devices opens up a new array of opportunities for providing value-added smart services and applications to end users. That is, IoT devices play an important role of providing useful services to the users. However, the states of IoT devices are dynamically changed at runtime, which come from their mobility, network connectivity, and a battery drain problem. This dynamism results in difficulties in managing these IoT devices. In this paper, we propose a framework to manage those IoT devices with dynamism. Hence, we first derive issues from IoT devices' dynamism. And, we define a set of requirements to manage the IoT devices and present a framework to manage the device dynamism. The framework is equipped by a device discovery method, a device status monitoring method, a device selection and connection method, and a device replacement method. Finally, we verify the feasibility and effectiveness of the framework through experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.759-768
• /
• 2012

This paper proposes a method to determine the elastic follow-up factors for the $C(t)$-integral under secondary stress. The rate of creep crack growth for transient creep is correlated with the $C(t)$-integral. Elastic follow-up behavior, which occurs in structures under secondary loading, prevents a relaxation of stress during transient creep. Thus, both the values of $C(t)$ and creep crack growth increase as increasing elastic follow-up. An estimation solution for $C(t)$ was proposed by Ainsworth and Dean based on the reference stress method. To predict the value of $C(t)$ using this solution, an independent method to determine the elastic follow-up factors for cracked bodies is needed. This paper proposed that the elastic follow-up factors for $C(t)$ can be determined by elastic-plastic analyses using the plastic-creep analogy. Finite element analyses were performed to verify this method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1223-1229
• /
• 2001

Though conventional calorimetry methods such as differential scanning calorimetry (DSC) and differential thermal analysis (DTA) are used generally in measuring heat of fusion, T-history method has the advantages of a simple experimental apparatus and no requirements of sampling process, which is particularly useful for measuring thermal properties of inhomogeneous phase change materials (PCMs) in sealed tubes. However, random criteria (a degree of supercooling) used in selecting the range of latent heat release and neglecting sensible heat during the phase change process can cause significant errors in determining the heat of fusion. In the present study, it was shown that a 40% discrepancy exists between the original T-history and the present methods when analyzing the same experimental data. As a result, a reasonable modification to the original T-history method is proposed.