• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.373-377
• /
• 2018

In this paper, we propose an implementation of a neural network accelerator for reducing the rendering noise using OpenCL. Among the rendering algorithms, we selects a ray tracing to assure a high quality graphics. Ray tracing rendering uses ray to render, less use of the ray will result in noise. Ray used more will produce a higher quality image but will take operation time longer. To reduce operation time whiles using fewer rays, Learning Base Filtering algorithm using neural network was applied. it's not always produce optimize result. In this paper, a new approach to Matrix Multiplication that is based on General Matrix Multiplication for improved performance. The development environment, we used specialized in high speed parallel processing of OpenCL. The proposed architecture was verified using Kintex UltraScale XKU6909T-2FDFG1157C FPGA board. The time it takes to calculate the parameters is about 1.12 times fast than that of Verilog-HDL structure.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.377-395
• /
• 2014

Vibration-based fault detection and condition monitoring of rotating machinery, using statistical process control (SPC) combined with statistical pattern recognition methodology, has been widely investigated by many researchers. In particular, the discrete wavelet transform (DWT) is considered as a powerful tool for feature extraction in detecting fault on rotating machinery. Although DWT significantly reduces the dimensionality of the data, the number of retained wavelet features can still be significantly large. Then, the use of standard multivariate SPC techniques is not advised, because the sample covariance matrix is likely to be singular, so that the common multivariate statistics cannot be calculated. Even though many feature-based SPC methods have been introduced to tackle this deficiency, most methods require a parametric distributional assumption that restricts their feasibility to specific problems of process control, and thus limit their application. This study proposes a nonparametric multivariate control chart method, based on multiscale wavelet scalogram (MWS) features, that overcomes the limitation posed by the parametric assumption in existing SPC methods. The presented approach takes advantage of multi-resolution analysis using DWT, and obtains MWS features with significantly low dimensionality. We calculate Hotelling's $T^2$-type monitoring statistic using MWS, which has enough damage-discrimination ability. A bootstrap approach is used to determine the upper control limit of the monitoring statistic, without any distributional assumption. Numerical simulations demonstrate the performance of the proposed control charting method, under various damage-level scenarios for a bearing system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.440-451
• /
• 1985

This study is concerned with the analysis of cutting force system acting on ball-nose end mill in three-dimensional surface machining process. Conical tipped circular cutting edge element model and free surface machining process types are proposed to apply oblique cutting theory, and then derived equations are used for numerical approach of cutting force curves by matrix method. This approach has a good agreement with experimental results both in magnitude and shape within the range of 15 percent, which was conformed on 6061-T6 aluminum workpiece having twofold curvatured surface. From the cutting load variation to edge location, it is confirmed that circular cutting edge shapes has a better cutting ability than that of straight and both have a singularity near a tool point. It is also verified that what kind of machining condition is recommendable for three-dimensional machining process in connection with deflection of the cutter to workpiece and tool point wearing or system stability.

• Computers and Concrete
• /
• v.2 no.5
• /
• pp.345-366
• /
• 2005

This work presents an assessment of the computational performance of a vector-parallel implementation of probabilistic model for concrete cracking in 3D. This paper shows the continuing efforts towards code optimization as reported in earlier works Paz, et al. (2002a,b and 2003). The probabilistic crack approach is based on the direct Monte Carlo method. Cracking is accounted by means of 3D interface elements. This approach considers that all nonlinearities are restricted to interface elements modeling cracks. The heterogeneity governs the overall cracking behavior and related size effects on concrete fracture. Computational kernels in the implementation are the inexact Newton iterative driver to solve the non-linear problem and a preconditioned conjugate gradient (PCG) driver to solve linearized equations, using an element by element (EBE) strategy to compute matrix-vector products. In particular the paper analyzes code behavior using OpenMP directives in parallel vector processors (PVP), such as the CRAY SV1 and CRAY T94. The impact of the memory architecture on code performance, and also some strategies devised to circumvent this issue are addressed by numerical experiment.

• Language and Information
• /
• v.18 no.1
• /
• pp.33-52
• /
• 2014

This paper proposes a unified structural account of some instances of the English Modals and Semi-auxiliaries. The classification and the syntactic/structural description of the English Modal auxiliary verbs and verb-related elements have long been the center for many proposals in the history of generative syntax. According to van Gelderen (1993) and Lightfoot (2002), it was sometime around 1380 that the Tense-node (T) appeared in the phrasal structures of the English language, and the T-node is under which the English Modal auxiliaries occupy. Closely related is the existing evidence that English Modals were used as main verbs up to the early sixteenth century (Lightfoot 1991, Han 2000). This paper argues for a bi-clausal approach to English Modal auxiliaries with the infinitival particle 'to' such as 'ought to' 'used to' and 'dare (to)' 'need (to)', etc. and Semi-auxiliaries including 'be to' and 'have to'. More specifically, 'ought' in 'ought to' constructions, for instance, undergoes V-to-T movement within the matrix clause, just like 'HAVEAux' and all instances of 'BE', whereas 'to' occupies the T position of the embedded complement clause. By proposing the bi-clausal account, Radford's (2004, 2009) problems can be solved. Further, the historical motivation for the account takes a stance along with Norde (2009) and Brinton & Traugott (2005) in that Radford's (2004, 2009) syncretization of the two positions of the infinitival particle 'to' is no different from the 'boundary loss' in the process of Grammariticalization. This line of argument supports Krug's (2011), and in turn Bolinger's(1980) generalization on Auxiliaryhood, while providing a novel insight into Head movement of V-to-T in Present Day English.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.385-396
• /
• 2006

For the regeneration of periodontal tissues, the microenvironment for new attachment of connective tissue fibers should be provided, At this point of view, cementum formation in root surface plays a key role for this new attachment. This study was performed to figure out which factor promotes differentiation of cementoblast Considering anatomical structure of tooth, we selected the cells which may affect the differentiation of cementoblast - Ameloblast, OD11&MDPC23 for odontoblasts, NIH3T3 for fibroblsts and MG63 for osteoblasts. And OCCM30 was selected for cementoblast cell line. Then, the cell lines were cultured respectively and transferred the conditioned media to OCCM30. To evaluate the result, Alizarin red S stain was proceeded for evaluation of mineralization. The subjected mRNA genes are bone sialoprotein(BSP), alkaline phosphate(ALP) , osteocalcin(OC), type I collagen(Col I), osteonectin(SPARC ; secreted protein acidic and rich in cysteine). Expression of the gene were analysed by RT-PCR, The results were as follows: 1. For alizarin red S staining, control OCCM30 didn't show any mineralized red nodules until 14 days. But red nodules started to appear from about 4 days in MDPC-OCCM30 & OD11-OCCM30. 2. For results of RT-PCR, ESP mRNAs of control-OCCM30 and others were expressed from 14 days, but in MDPC23-OCCM30 & OD11-OCCM30 from 4 days. Like this, the gene expression of MDPC23-OCCM30 & OD11-OCCM30 were detected much earlier than others. 3. For confirmation of odontoblast effect on cementoblast, conditioned media of osteoblasts(MG63) which is mineralized by producing matrix vesicles didn't affect on the mineralized nodule formation of cementoblasts(OCCM30). This suggest the possibility that cementoblast mineralization is regulated by specific factor in dentin matrix protein rather than matrix vesicles. Therefore, we proved that the dentin/odontoblast promotes differentiation/mineralization of cementoblasts. This new approach might hole promise as diverse possibilities for the regeneration of tissues after periodontal disease.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1724_1725
• /
• 2009

In this paper, new approaches to optimal controller design for a class of discrete-time Takagi-Sugeno (T-S) fuzzy systems are proposed based on a relaxed approach, in which non-quadratic Lyapunov function and non-parallel distributed compensation (PDC) control law are used. New relaxed conditions and linear matrix inequality (LMI) based design methods are proposed that allow outperforming previous results found in the literature. Finally, an example is given to demonstrate the efficiency of the proposed approaches.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2723-2725
• /
• 2005

In this paper, a robust $H{\infty}$ stabilization problem to a uncertain discrete-time nonlinear systems with time-delay via fuzzy static output feedback is investigated. The Takagi-Sugeno (T-S) fuzzy model is employed to represent an uncertain nonlinear systems with time-delayed state. Then parallel distributed compensation technique is used for designing of the robust fuzzy controller. Using a single Lyapunov function, the globally asymptotic stability and disturbance attenuation of the closed-loop fuzzy control system are discussed. Sufficient conditions for the existence of robust $H{\infty}$ controllers are given in terms of linear matrix inequalities via similarity transform and congruence transform technique.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.2
• /
• pp.153-162
• /
• 2014

A novel robust $H_{\infty}$ switching tracking control design method with disturbance observer is proposed for the near space interceptor (NSI) with aerodynamic fins and reaction jets. Initially, the flight envelop of the NSI is divided into small subregions, and a slow-fast loop polytopic linear parameter varying (LPV) model is proposed, to approximate the nonlinear dynamic of the NSI, based on the Jacobian linearization and Tensor-Product (T-P) model transformation approach. A disturbance observer is then constructed, to estimate the modeled disturbance. Subsequently, based on the descriptor system method, a robust switching controller is developed, to ensure that the closed-loop descriptor system is stable with a desired $H_{\infty}$ disturbance attenuation level. Furthermore, the outcome of the proposed switching tracking control problem is formulated as a set of linear matrix inequalities (LMIs). Finally, simulation results demonstrate the effectiveness of the proposed design method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1783-1784
• /
• 2008

This paper presents a novel control technique to deal with networked control systems with neutral timedelay, which is known to highly degrade the control performance of the controlled system. The stability analysis and design method for a sampled-data fuzzy controller for discrete networked control systems (NCS). The neutral time-delay and sampling activity will complicate the NCS. And it make the stability analysis much more difficult than that for a continuous-time NCS. Based on the fuzzy control approach, linear matrix inequality (LMI)-based stability conditions are derived to guarantee the neutral T-S fuzzy system stability. The simulation results and practical experiments illustrate that the proposed controller design is realistic.