• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.4
• /
• pp.1-10
• /
• 1993

This paper presents the designing/manufacturing scheme of the diplexer for satellite transponder which is composed of 2-channel bandpass filters, coupled with E-plane T-junction, having symmetrical waveguide E-plane step discontinuity structures. The 2-channel bandpass filters of the diplexer are designed by the scheme of connecting ${\lambda}_{g}$/2 shunt stub to the waveguide E-plane, playing the role of heat sinks without attaching a special heat sinks and to give the profitable productivity and allow the low-cost manufacturing at mass production, tuning screws are eliminated which have been used to compensate the operating characteristics of manufactured filters. The 2 channel bandpass filters of manufactured 14/12 GHz diplexer for domestic Ku-band satellite transponder have the return loss of 25 dB, insertion loss of 0.3 dB in passband, and below-50 dB of stopband characteristics (T$_{x}$ : f$_{o}{\pm}$250 MHz, R$_{x}$ : f$_{o}{\pm}$220 MHz) at room temperature.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.59-62
• /
• 2002

Magnetic tunnel junctions (MTJs) were fabricated with high bias for plasma oxidation and the effects of annealing on the temperature dependence of tunneling magnetoresistance (TMR) were investigated experimentally. As-grown, TMR increases, peaks around 160 K, and decreases with increasing temperature from 80 K to 300 K. When MTJs are annealed, $T_{max}$, the temperature at which maximum TMR is obtained, decreases as annealing temperature increases to the optimal point. In order to explain this abnormal temperature dependence of TMR, the difference of conductance between parallel and antiparallel alignments of magnetizations as a function of temperature is also analyzed. The shifts of $T_{max}$ due to annealing process are described phenomenologically with spin-dependent transfer rates of electrons tunnel through the barrier.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.33-38
• /
• 2004

To investigate the reliability of the MTJs on the roughness of insulating tunnel barrier, we prepared two MTJs with the different uniformity of barrier thickness. Namely, the one has uniform insulating barrier thickness; the other has non-uniform insulating barrier thickness as compared to different thing. As to depositing amorphous layer CoZrNb under the pinning layer IrMn, we achieved MTJ with uniform barrier thickness. Toinvestigate the reliability of the MTJs dependent on the bottom electrode, time-dependent dielectric breakdown (TDDB) measurements were carried out under constant voltage stress. The Weibull fit of out data shows clearly that $t_{BD}$ scales with the thickness uniformity of MTJs tunnel barrier. Assuming a linear dependence of log($t_{BD}$) on stress voltages, we obtained the lifetime of $10^4$years at a operating voltage of 0.4 V at MTJs comprising CoNbZr layers. This study shows that the reliabilityof new MTJs structure was improved due to the ultra smooth barrier, because the surface roughness of the bottom electrode influenced the uniformity of tunnel barrier.

• Progress in Superconductivity
• /
• v.2 no.2
• /
• pp.65-70
• /
• 2001

$Pb/Bi_2Sr_2CaCu_2O_{8+\delta}$-single-crystal junctions with the tunneling direction along the c axis of the crystal were fabricated to obtain an s-wave-superconductor/d-wave-superconductor Josephson junctions. The tunneling R (T) curves and current-voltage characteristics show distinct features which can be explained only under the assumption that the order parameter of high-$T_c/Bi_2Sr_2CaCu_2O_{8+{\delta}}$ superconductors has a pure d-wave symmetry, which is in contrast to the case of $YBa_2Cu_3O_{7+{\delta$}}$erconductors where a minor s-wave component is also present..

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.86-91
• /
• 1999

We have fabricated high-$\textrm{T}_c$ superconducting $\textrm{YBa}_{2}\textrm{Cu}_{3}\textrm{O}_{7-x}$(YBCO) grain boundary junctions at a step-edge on (001) $\textrm{SrTiO}_3$(STO) substrates. A diamond-like carbon (DLC) film grown by plasma enhanced chemical vapor deposition were used as an ion milling mask to make steps on the STO (100) single crystal and was removed by an oxygen reactive ion etch process. The c-axis oriented YBCO and TO thin films were deposited epitaxially on the STO substrate with a step-edge by pulsed laser deposition. The grain boundary junctions were formed at the top and the bottom of the step. The junctions worked at temperatures above 77 K, and had I\ulcornerR\ulcorner products of 7.5mV at 16K and 0.3 mV at 77K, respectively. The I-V characteristics of these junctions showed the shape of the two noisy resistively shunted junction model.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2023

Cold-junction correction(CJC) and disconnection detection circuit design of various thermocouples(TC) and multi-channel TC interface circuit using them were designed. The CJC and disconnection detection circuit consists of a CJC semiconductor device, an instrumentation amplifier(IA), two resistors and a diode for disconnection detection. Based on the basic circuit, a multi-channel interface circuit was also implemented. The CJC was implemented using compensation semiconductor and IA, and disconnection detection was detected by using two resistor and a diode so that IA input voltage became -0.42V. As a result of the experiment using R-type TC, the error of the designed circuit was reduced from 0.14mV to 3㎶ after CJC in the temperature range of 0℃ to 1400℃. In addition, it was confirmed that the output voltage of IA was saturated from 88mV to -14.2V when TC was disconnected from normal. The output voltage of the designed circuit was 0V to 10V in the temperature range of 0℃ to 1400℃. The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel. The implemented multi-channel interface has a feature that can be applied equally to E, J, K, T, R, and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.

• Journal of Environmental Science International
• /
• v.22 no.6
• /
• pp.695-703
• /
• 2013

In this study, the effects of four major river project and Kumho River, second biggest branch of Nakdong River, were investigated to provide basic data for proper management of Nakdong River's water quality. Daily sampling processes at three different points, Munsanri (the upper side of Kangjung-Koryung weir), Kangchang (the outlet of the Kumho River) and Samunjin (the lower side of Kangjung-Koryung weir and junction of Kumho River and Nakdong River), were conducted from May 1st 2011 to Sep. 4th 2011. Water samples were analyzed for nine factors, DO, BOD, COD, T-N, T-P, pH, turbidity, SS, and coliform. As demonstrated by the results, concentrations of BOD, T-N, T-P and coliform at Nakdong River were affected by water quality of Kumho River while SS and turbidity were affected by constructions for Kangjung-Koryung weir. Further studies, for example, affects of wastewater treatment facilities, should be followed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.4
• /
• pp.345-349
• /
• 2014

In this study, an age-hardened 6061-T6 alloy sheet was used, which is commonly utilized for auto parts. The junction strength characteristics in relation to the stirring speed and welding speed were studied in accordance with the friction stir welding rotation of the tool pin. Micro hardness measurements of A type and B type pins, for a welding speed of 400 mm/min and a tool rotational speed 3000 rpm, were obtained as Hv104 and Hv111, respectively. For a welding speed of 200 mm/min and a tool rotational speed of 2000 rpm, we obtained Hv48 and Hv50 for A and B type pins, respectively. Microstructure observation showed that the stirring portion was fine and uniform, which occurred because of its plastic deformation. In the thermomechanically affected zone, partial recrystallization was present because of the plastic deformation. The crystal grains in the heat affected zone were coarsened due to the heat generated by friction stir welding.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.92-100
• /
• 2002

The 16-port feed waveguide array with inductive walls analyzed by Galerkin's method of moments are proposed for the DBS reception system mounted on vehicle. First of all, in order to verify the validity of electromagnetic analysis and design for a $\pi$-junction feed waveguide, it is designed and fabricated at DBS band. The measurement results of a $\pi$-junction feed waveguide agree well with the theoretical ones. Based on this design method, an array design for WR-90 standard waveguide is conducted. Since the width of a $\pi$-junction feed WR-90 standard waveguide is larger than a guided wave length in an array design, the difference of amplitude and phase of 8-port array are calculated 2.3 dB and 62 degrees, respectively. The bandwidth with return loss of -20 dB below is about 220 MHz and it doesn't satisfy DBS band. To solve this problem, we propose a novel design that the width of a $\pi$-junction feed waveguide equals to a guided wave length. By the proposed novel design for 8-port feed waveguide array, the difference of amplitude and phase are decreased 1 dB and 13 degrees, respectively. The broad bandwidth of 700 MHz is also realized. The size of 16-port waveguide away compared with WR-90 array is reduced about 10 cm. The measured antenna gain for the fabricated 16-port feed waveguide array is observed 24 dBi above at DBS band.

• The Journal of Korean Physical Therapy
• /
• v.36 no.1
• /
• pp.39-44
• /
• 2024

Purpose: Cybersickness is a type of motion sickness induced by virtual reality (VR) or augmented reality (AR) environments that presents symptoms including nausea, dizziness, and headaches. This study aimed to investigate how cathodal transcranial direct current stimulation (tDCS) alleviates motion sickness symptoms and modulates brain activity in individuals experiencing cybersickness after exposure to a VR environment. Methods: This study was performed on two groups of healthy adults with cybersickness symptoms. Subjects were randomly assigned to receive either cathodal tDCS intervention or sham tDCS intervention. Brain activity during VR stimulation was measured by 38-channel functional near-infrared spectroscopy (fNIRS). tDCS was administered to the right temporoparietal junction (TPJ) for 20 minutes at an intensity of 2mA, and the severity of cybersickness was assessed pre- and post-intervention using a simulator sickness questionnaire (SSQ). Result: Following the experiment, cybersickness symptoms in subjects who received cathodal tDCS intervention were reduced based on SSQ scores, whereas those who received sham tDCS showed no significant change. fNIRS analysis revealed that tDCS significantly diminished cortical activity in subjects with high activity in temporal and parietal lobes, whereas high cortical activity was maintained in these regions after intervention in subjects who received sham tDCS. Conclusion: These findings suggest that cathodal tDCS applied to the right TPJ region in young adults experiencing cybersickness effectively reduces motion sickness induced by VR environments.