• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.487-488
• /
• 2010

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.166-173
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for an electrical vehicle body has been performed through T-peel joint tests with the design parameters such as joint style, adherend type, adherend thickness, adhesive thickness, and various adhesives. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the zero stress ratio. It was observed that the fatigue strength of the joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the fatigue strength of the joint increases insignificantly. An aluminum-FRP adherend combination shows much higher fatigue strength than an aluminum-aluminum adherend combination. The results of fatigue tests were found to be consistent with those of static tests.

• 한국인쇄학회지
• /
• 제21권1호
• /
• pp.35-44
• /
• 2003

Because of computer developing, the digital image making the use of many a field of application with - web-above, electronic publishing. printing, dynamic image management and photo CD production etc., however many problems of save and management. The management image use of compression moth which don't have a affect on image, reduce file size. A study used sequential DCT0based mode and progressive DCT-based mode of JPEG(Joing Photographic Experts Group) compression method and Wavelet compression method. Therefore, the analog image and digital image was changed and applied by several stages according to compression rate. It made inquiries of the optimum compression rate that be compared quality transformation between original image and compressed image. As compression image was printing simply, the quality was studied by subjective valuation method, that was studied propriety and usefulness.

• 대한정형도수물리치료학회지
• /
• 제14권1호
• /
• pp.48-60
• /
• 2008

Purpose : The purpose of this study was to compare the effects of Joing Mobilization and Group back Pain Exercise Program on the disability level and the pain of flexibility and the back muscle strength in the hearing impairment patients with Low back pain. Methods : The subjects of this study were 12 patients, 8 males and females. They visited clinic for physical treatment within 6 months after onset of low back pain. One group was applied with Joing Mobilization and other group was with Group back Pain Exercise Program. The patient were treated special program 3 times session weekly. And treatment 2 times session was 15min with physiotherapy weekly. The muscle strength was measured by Cybex 660, the level of disability by Oswestry low back pain disability scale, the intensity of pain by visual analogue scale (VAS). The data was analysed by paired T-test and independent T-test. Results : The results of this study were summarized as follow : 1. The Oswestry disability score of experimental and control group were significantly decreased and there was no difference in the Oswestry disability score change between joint mobilization group and back pain exercise group. 2. The pains in anterior, postrior, lift lateral and right lateral bending and in rotation of back pain exercise group were significantly increased compared with those of joint mobilization group. 3. The flexors and extensors peak torque of back pain exercise group were significantly increased at test velocities $30^{\circ}$/sec, $60^{\circ}$/sec compared with those of the joint mobilization group. There was no significant difference in extensors and flexors peak torque at $30^{\circ}$/sec, $60^{\circ}$/sec between two group. The results showed that the back pain exercise group were effective in decreasing disability score and pain of trunk activity, increasing trunk extension and flexion peak torque. Conclusion : It is suggested theat the back pain exercise program could be an essential factor for the effective intervension to the hearing impairment patients suffere from low back pain.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1202-1210
• /
• 1995

Aiming at nondestructive evaluation of defect with high accuracy and resolution, ICFPD(Induced Current Focusing Potential Drop) technique was newly developed. This technique can be applied for locating and sizing of defects in components with not only simple shape such as plain surface but also more complex shape and geometry such as curved surface and dissimilar joing. This paper describes the principle of ICFPD technique and also the results of 2-dimensional surface crack in ferromagnetic metal(A508 Cl. III steel) and paramagnetic metal (pure aluminum and stainless 304 steel) measured by this technique. Results are that surface defects in each specimen are detected with the difference of potential drop, and potential drops are distributed a similar shape for each metal and each depth. The normalized potential drop ( $V_{\delta}$2/$^{t}$ / $V_{{\delta} 2}$$^{-1}$) max. in the vicinity of defect is varied with the depth of defect. Therefore, ICFPD technique can be used for the evaluation of defect not only in ferromagnetic metal but also in paramagnetic steel..

• 한국강구조학회 논문집
• /
• 제15권6호통권67호
• /
• pp.673-681
• /
• 2003

본 논문은 냉간성형 각형강관 T형 접합부의 최대내력에 관한 실험 연구이다. 새로운 접합부로 지관을 트러스 평면에 대해 $45{^{\circ}}$회전시켜서 주관에 용접하고 주관 웨브 측면에는 플레이트로 보강한 형상을 연구 대상으로 설정하였다. $16.7{\leq}2{\gamma}(B/T){\leq}33.3$이고 $0.63{\leq}{\beta}(b1/B){\leq}0.7$ 범위의 지관 $45{^{\circ}}$회전시킨 T형 접합부에 대하여, 기존 최대내력식과의 비교 검토를 통하여 웨브 측면 보강에 따른 내력증대 및 파괴모드의 변화 등에 대하여 실험을 통해 조사하고자 한다. 실험결과, 보강판 두께 증가에 따라 보강 실험체의 접합부 내력이 상승하는 것으로 나타났다. $2{\gamma}=33.3$이고 플레이트로 웨브 보강한 실험체는는 접합부 파괴모드가 플랜지 파괴(M2)에서 복합파괴(M3) 형태로 전환되었으며, $2{\gamma}=16.7$이고 플레이트로 웨브 보강한 실험체에서는 웨브파괴(M1)에서 플랜지파괴(M2)로 지배 파괴모드가 변화하는 것으로 나타났다.