• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.503-504
• /
• 2010

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.817-818
• /
• 2006

A 2.0T class HTS conduction cooled magnet was designed. Designing of magnet shape was performed through two steps. First step is to find a basic cross section for minimize the amount of conductor used and second step to optimize the coil shape to satisfy the magnetic field homogeneity. The magnetic fields was analyzed with FEM and the critical current value of magnet was also expected with the result of field analysis and the Ic to B curve of Bi-2223 HTS tape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.210-212
• /
• 1996

A nonlinear optimization method for the shape optimization of actively shielded superconducting MRI magnet is presented. The presented design method can optimize both main coil and shielding coil simultaneously by setting constraints on stray field intensity at a specified distance from the magnet center. A 1 Tesla actively shielded superconducting MRI magnet, with 30cm bore diameter, is designed using the presented method.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1040-1046
• /
• 2018

The Permanent Magnet Synchronous Motor(PMSM) has various advantages. However, new types of research have been carried out because of rising prices of materials for rare earth magnets used in PMSM and also unstable supply. In this paper, we propose Consequent Pole(CP) type IPMSM for magnet reduction. The shape of CP type IPMSM stator was same with Basic model IPMSM. The design of the rotor shape was proceeded that CP type IPMSM achieved the same output as the basic model IPMSM. Finally, the selected model and IPMSM were compared and discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.404-406
• /
• 2001

This paper is about designing the magnetizing system which is used for magnetizing the NdFeB magnet in a squirrel cage rotor. It propose the shape of the magnetizing yoke, the number of coil turn and the capacitor discharging circuit parameter. In case of magnetizing the NdFeB magnet assembled with a squirrel cage rotor, the eddy current which is produced during magnetizing becomes a disturbance in magnetizing NdFeB magnet. Hence in this paper, we try to design optimized magnetizing system with eddy current considered by FEM(Finite Element Method).

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.49-54
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator and static type EDS simulator using high-Tc superconducting (HTS) levitation magnet. The levitation force of the EDS system is formed by the reaction between the moving magnet and the fixed ground conductor. The possible two ways to simulate the EDS system were simulated in this paper by using finite element method (FEM). The first way was the moving type simulator which consists of the fixed HTS magnet and the moving ground conductor. The second way was the static type simulator which consists of the fixed magnet, the fixed ground conductor and the ac current supply system. To verify the characteristics of high speed EDS system with the moving type simulator heavy, large and fast moving ground conductor is needed. The static type simulator can get the characteristics of the high speed EDS system by applying equivalent ac current to velocity, therefore it does not need large moving part. The static type EDS simulator, which can consist of an HTS magnet, the fixed ground conductor(s), an AC power supply and the measuring devices, also test the effect of the shape of the ground conductor easily. The plate type ground conductor made stronger levitation force than ring type ground conductor. Although the outer diameter 335 mm ring type ground conductor (Ring3) was larger than the outer diameter 235 mm ground conductor (Ring2), the levitation force by Ring2 was stronger than that by Ring3. From the calculation results on this paper, the consideration of the magnetic flux distribution according to the levitation height should be included in the process of the ground conductor design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.113-115
• /
• 2003

This paper presents the optimal design of a brushless DC motor(BLDC) keeping the average torque and cogging torque of the initial model while minimizing the volume of magnet pole by FEM and evolution strategy. Experimental tests are performed by the finite element method(FEM), and the random based evolution strategy is applied for the shape optimization. The optimal result shows a largely reduced volume of magnet pole.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.291-298
• /
• 2004

The observations of rapid motion of bubbles under water for approximately 50 ms or less in high-magnetic fields of 10 T have been carried out successfully for the first time. The observation system constructed is composed of a high-speed video camera, a telescope, a cryostat with a split-type superconducting magnet, a light source, a mirror and a transparent sample cell. Using this system, the influence of magnetic field on the path and shape of single bubbles of O$_2$ (paramagnetism) and N$_2$ (diamagnetism) has been examined carefully. Experimental values describing the path are in good agreement with theoretical values calculated on the basis of the magneto-Archimedes effect, despite the effect of magnetism on the bubble. However, no effect of magnetism on the shape of the bubble is observed. In addition, the influence of magnetic field on drag coefficient of the bubble is discussed.

• 한국항해항만학회지
• /
• 제28권2호
• /
• pp.141-148
• /
• 2004

The observations of rapid motion of bubbles under water for approximately 50ms or less in high . magnetic fields of 10 T have been carried out successfully for the first time. The observation system constructed is composed of a high-speed video camera, a telescope, a cryostat with a split-type superconducting magnet, a light source, a mirror and a transparent sample cell. Using this system, the influence of magnetic field on the path and shape of single bubbles of $O_2$(paramagnetism) and $N_2$ (diamagnetism) has been examined carefully. Experimental values describing the path are in good agreement with theoretical values calculated on the basis of the magneto-Archimedes effect, despite the effect of magnetism on the bubble. However, no effect of magnetism on the shape of the bubble is observed In addition, the influence of magnetic field on drag coefficient of the bubble is discussed.

• 헤리티지:역사와 과학
• /
• 제54권1호
• /
• pp.206-219
• /
• 2021

기후 온난화는 흰개미에 의한 목조건축문화재 및 가옥 등에 대한 피해를 증가시키고 있다. 현재 흰개미 피해 예방을 위해 건물 주변에 군체 제거 시스템을 설치하여 탐지와 제거를 진행하는 방법이 활용되고 있다. 그러나 1~2개월 단위로 현장을 주기적으로 방문해야 흰개미 유입 여부를 확인할 수 있어 신속한 조치를 취하기 어렵다. 또한 시스템이 장기간 노출된 상태로 설치·운영되기 때문에 결실되거나 훼손되어 기능 손상이 발생하고 있으며 문화재 주변에 설치된 경우 관람 환경을 저해하기도 한다. 본 연구는 목재, 셀룰로오스, 자석, 자력센서를 사용하여 흰개미 유입 여부를 판단하는 탐지 시스템을 제작하여 실험하였다. 그리고 현장을 방문하지 않고 결과를 확인하기 위해 적은 전력으로 작동되는 LoRa Network로 데이터를 전송받았다. 목재는 말목 형태로 제작되었고, 상부에서 하부로 구멍을 내어 유입된 흰개미가 셀룰로오스 시료로 이동이 용이하도록 하였다. 셀룰로오스 시료는 자석을 셀룰로오스로 감싸 원통형으로 만들었으며 목재의 구멍 상부에 삽입하였다. 그리고 목재 말목 상부를 마개로 덮어 이물질 등이 유입되지 않도록 하였으며, 빛·빗물 등 환경적 요인을 차단하여흰개미가 셀룰로오스 시료를 가해할 수 있는 환경을 조성하였다. 셀룰로오스가 흰개미에 의해 가해되면 자석 주위에 공간이 생기고 자석이 낙하하거나 기우는 등의 움직임이 발생하였다. 마개 내에 있는 자력센서는 셀룰로오스 시료 위쪽에 고정하여 자석의 움직임에 따라 자석과 센서 사이의 간격 변화를 측정하였다. 야외 현장 실험은 목재 탐지 시스템에 셀룰로오스 시료를 11개 삽입 후, 5~17일 사이에 현장 방문 없이 자석의 움직임을 통해 흰개미 유입을 확인하였다. 향후 추가적으로 기능을 개선하여 운영한다면 현장 방문 없이 흰개미의 침입 여부를 확인할 수 있고 제품 노출로 인한 훼손과 결실을 줄이며 이에 따라 문화재에 대한 관람 환경이 개선될 것으로 기대된다.