• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.24-24
• /
• 2002

• Journal of the Korea Construction Safety Engineering Association
• /
• s.26
• /
• pp.108-113
• /
• 1997

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.278-279
• /
• 2004

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.110-113
• /
• 2000

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.42-45
• /
• 1998

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.231-237
• /
• 1994

컴퓨터의 눈부신 발달에 힙입어 실험 또는 해석적 방법으로 일반 구조물이나 기계구조물의 진동특성을 손쉽고 정확하게 파악하는 것이 가능하게 되었다. 그런데 최근의 산업현장은 지금까지의 정확한 구조해석에만 그치지 않고 이를 바탕으로 강도 개선, 재료 절감을 통한 원가절감, 중량 최소화 문제등의 차원에서 동적인 특성의 변경을 요구하고 있다. 이러한 문제는 그 중요성에도 불구하고 여전히 설계자의 경험이나 시행착오에 의존하고 있는 실정이다. 본 연구에서는 구조물 결합부분에 주목하여 동특성의 변경 문제를 해석하고자 하였다. 즉 거의 모든 구조물이 결합부를 가지고 있는데 결합부 특성을 정확히 파악할 수 없기 때문에 리벳이나 보울트나 어떤 특수한 형태 결합부가 구조물의 특성에 주는 영향을 예측하기 어렵다. 이러한 결합부이 특성을 알아내고 구조물 동특성 변경 및 개선안을 제시하는 최적설계를 위해 감도해석기법은 아주 유효하게 쓰일 수 있다. 한편 구조물의 대형화, 복잡화는 구조물 동특성 해석에 더욱 많은 계산시간과 용량이 큰 전자계산기를 필요로 하게 되었으며, 분계의 결합부위가 변경되거나 결합형태가 변했을 때 전계의 동특성을 다시 해석할 필요없이 분계만의 정보로부터 전계의 동특성을 알아낼 필요가 생겼다. 이러한 의미에서 구조물의 분계로부터 전계의 동특성을 해석을 위한 부분구조합성법이 대두되게 되었다. 본 연구에서는 이러한 감도해석과 부분구조합성법의 공통된 문제를 일치화하고자 하였다. 즉 감도해석기법을 이용하여 필요한 구조물의 동특성에 부합하는 결합부의 최적한 설계변수를 규명하였고 이렇게 구해진 결합부의 설계변수와 분계의 정보를 알고리즘이 비교적 간단하고 오차가 적은 축소임피던스 합성법에 적용하여 전계의 동특성을 해석함으로써 감도해석기법과 축소임피던스 합성법의 통합적용이 최적설계와 이에 따른 동특성 해석에 효과적인 방법임을 보이고자 하였다. 대상구조물은 구조물 결합의 기본적인 형태인 T형을 선택하였다. T형 구조물은 분계 A(16개의 사각요소)와 분계 B(8개의 사각요소)로 이루어져 있으며 두개의 스프링으로 결합되어 있다. 설계변수는 강성에 국한하였으며 결합부의 결합형태는 탄성결합과 강결합으로 하였다. 감도해석과 축소임피던스 합성법에 의해 구해진 고유진동수와 FRF를 상용 유한 요소 해석 패키지인 MSC/NASTRAN을 통하여 검증하여 이 연구의 타당성을 검토하였다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.117-127
• /
• 2007

In this study, we evaluate the strength of steel box beam-to-column connections subjected to axial loads in steel frame piers. The T-connection strength was reduced due to the column axial force in the two-story pier structure. To examine this phenomenon, non-linear FEM analysis was carried out and the analytical procedure was verified by comparing it with experimental results. To clarify the effect of the axial force and major design parameters in connection with strength, influence of panel zone width-thickness ratio, sectional area, and axial force was investigated using FEM analysis. Also, the theoretical strength equations were suggested by stress distribution of panel zone. The strength of the T-connection was compared with one of the one-story pier structure connections. As a result, the strength evaluation equations are proposed in consideration of the panel zone width-thickness ratio and sectional area ratio for the T-connections.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.19-28
• /
• 2013

In a shear wall-frame structural system, the structural response is determined by the interaction between the shear wall in bending mode and the frame in shear mode. In order to effectively consider these characteristics of a shear wall-frame structure, the simplified numerical model using the T-shape rigid body was suggested in the previous study. Based on the previously proposed model, an efficient numerical model for a wall-frame structure with an eccentric core has been proposed in this study. To this end, the previously proposed 2D model is extended to the 3D model and it is enhanced by considering torsion effects. As a result, the enhanced model can be applied to the analysis of a wall-frame structure with an eccentric core as well as a centric core.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.31-39
• /
• 2012

Recently new construction and reconstruction of the bridge have been required to minimize traffic congestion, environmental disadvantage, to reduce the period of construction, and to improve the quality and workability during the construction. For this reason, the application of modular bridge system, which is assembly of the structural members, is necessary to prepare for near future. Fall of girders can occur at the moment to connect between precast girders during the construction, so appropriate cross beams should be installed to solve the mentioned problem. In this study, understanding the structural characteristics and domestic and international case of cross beam, alternative cross beam system for modular bridge was developed. To inspect the structural characteristics of the alternative system, specimens were built and static loading test was performed. Afterward, the behavior of cross beam interms of joints and load distribution was observed. Experimental results were analyzed and compared with each data. Therefore, the appropriate cross beam system for modular bridge will be chosen and proposed in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.99-106
• /
• 2006

Due to single symmetry of cross section, T-shaped members are likely to buckle in a flexural-torsional mode when they are subjected to axial compression. Therefore, the flexural-torsional buckling can be regarded as a governing mode of global buckling. An experimental program has been carried out to investigate the flexural-torsional buckling behavior of pultruded T-shaped members. Two types of pultruded members were tested in the experiment, and they were made of either E-glass/vinylester or E-glass/polyester. Lay-up and thickness of reinforcing layers, volume fractions of each constituents in layers, mechanical properties were experimentally determined. Two sets of knife edge fixure were used to simulate simple support condition for flexure and twisting, and the lateral displacements and the angle of twist were measured using three potentiometers. Every specimen buckled in a flexural-torsional mode, and most of the specimens showed post-buckling strength.