• Journal of Korean Elementary Science Education
• /
• v.29 no.4
• /
• pp.441-450
• /
• 2010

The purpose of this study was to evaluate the level of elementary gifted students' argumentation and examine the special features of argumentation founded in scientific inquiry. 28 students were selected in the special education center for the gifted in K National University. They were organized 8 groups of 3~4 students and engaged in scientific inquiry activity. The researcher wasn't involved in students' inquiry activity and argumentation except for the guiding and introducing their activity. In the first session, each group carried out the experiment 'Putting a heated can in the water' and then, the students discussed to probe their experimental results and build their explanation. In the second session, each group presented their experiment results and evidence from their experiment justifying their claims, and had questions from other groups. The protocol data during 8 groups' argumentations were analyzed using 'Rubric for Scientific Argumentation Assessment' (Yang et al., 2009) in three domains- the form, content and attitude. As a result, in form domain, almost groups were rated 2 points due to their argument without rebuttal on the subcategory of 'composition', but they got a good grade above 3 points in subcategory such as 'claim', 'ground', and 'conclusion'. In content domain, almost groups got points above 3 points. In attitude domain, there were some striking contrast between each groups. Six groups got good score more than 4 points on the subcategory of openness, but two groups, they alleged and got score below 3 point. While the 6 groups of all got 4 points in the aspect of participation, 3 groups got 3 points lower than because they only just asserted and not interact with other groups. Throughout the argumentation, two features were found that; as time goes by, arguments were refined; Students tended to use their prior to knowledge rather than evidence such as experimental data in making claims and conclusions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.3
• /
• pp.119-123
• /
• 2015

Objectives: Dentin is composed of many minerals and growth factors. Based on this composition, we studied its effect as a possible regenerative material for alveolar healing. Materials and Methods: This study was conducted using four 2.5-year-old mongrel dogs (male; weight, 25 to 30 kg). The third mandibular premolars were carefully mobilized with a dental elevator and then removed using forceps. The crown portions of the extracted teeth were removed with cutters, and the root portions of the remaining teeth were collectively trimmed as closely as possible to 350 to $500{\mu}m$. Dentin and cementum (DC) chips harvested from the extracted teeth were soaked in blood and packed into the fresh sockets (autograft). Biopsies were performed at the ends of day 14 and day 56 following implantation. Data were expressed as $mean{\pm}standard$ deviation and compared with t-test results. Results: The ratio of $S_A$(bone) to total area of each probe was determined and was $170{\pm}16{\mu}m^2$ for the control group and $71{\pm}14{\mu}m^2$ for the DC group, a significant difference (P <0.05). Conclusion: DC particulate grafts offered no improvement in bone regeneration in alveolar extraction sockets.

• Composites Research
• /
• v.16 no.3
• /
• pp.9-17
• /
• 2003

In order to simulate the crack connection between cords and the interply crack growth in the belt-layer of real tire, 2 ply rubber/cord laminate specimens with exposed edges were tested in 4~11mm displacement control. Measurement of the crack connection is evaluated when crack reaches the half of the length between 45$^{\circ}$ aligned cords, and the amount of the crack growth is measured by the steel probe method. 2 dimensional analytic modeling was performed to simulate the crack connection between cords at the exposed edges. Also, the theoretical life of the specimens was calculated from the crack connection life between cords(critical value) and from the critical value to the final failure by the use of Tearing energy(T); the strain energy release per unit area of one fracture surface of a crack. Then, theoretical life was compared with those of experiments. The life prediction up to the critical value has about 20% error compared to experimental life, and up to the final failure about 65% error. Therefore, total theoretical life has about 45% error compared to the experimental life, which is conceivable in the case of rubber.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.719-741
• /
• 1997

This study was undertaken to compare by Atomic Force Microscope the effects of various finishing and polishing instruments on surface roughness of filling and veneering composite resins. Seven composite resins were studied : Silux Plus (3M Dental Products, U.S.A.), Charisma (Heraeus Kulzer, Germany), Prisma THP (L.D.Caulk, Dentsply, U.S.A.), Photoclearfil (Kuraray, Japan), Cesead (Kuraray, Japan), Thermoresin LC (GC, Japan), Artglass (Heraeus Kulzer, Germany). Samples were placed and polymerized in holes (2mm thick and 8.5mm in diameter) machined in Teflon mold under glass plate, ensuring excess of material and moulded to shape with polyester matrix strip. Except control group (Polyester matrix strip), all experimental groups were finished and polishied under manufacturer's instructions. The finishing and polishing procedure were : carbide bur (E.T carbide set 4159, Komet, Germany), diamond bur (composite resin polishing bur set, GC, Japan), aluminum-oxide disc (Sof-Lex Pop-On, 3M Dental Products, U.S.A.), diamond-particle disc (Dia-Finish, Renfert Germany), white stone bur & rubber point( composite finishing kit, EDENTA, Swiss), respectively. Each specimens were evaluated for the surface roughness with Atomic Force Microscope (AutoProbe CP, Park Scientific Instruments, U.S.A.) under contact mode and constant height mode. The results as follows : 1. Except Thermoresin LC, all experimental composite resin groups showed more rougher than control group after finishing and polishing(p<0.1). 2. A surface as smooth as control group was obtained by $Al_{2}O_{3}$ disc all filling composite resin groups except Charisma and all veneering composite resin groups except Thermoresin LC(p<0.05). 3. In case of Thermoresin LC, there were no statistically significant differences before and after finishing and polishing(p>0.1). 4. Carbide bur, diamond bur showed rough surfaces in all composite resin groups, so these were inappropriate for the final polishing instruments.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.256-263
• /
• 2006

In the model legume Medicago truncatula, two mutants, sickle and sunn, exhibit morphologically and genetically distinct hypernodulation phenotypes. However, efforts to isolate the single recessive and single semidominant genes for sickle and sunn, respectively, by map-based cloning have so far been unsuccessful, partly due to the absence of clones that enable walks from linked marker positions. To help resolve these difficulties, a new bacterial artificial chromosome (BAC) library was constructed using BamHI-digested genomic fragments. A total of 23,808 clones were collected from ligation mixtures prepared with double-size-selected high-molecular-weight DNA. The average insert size was 116 kb based on an analysis of 88 randomly selected clones using NotI digestion and pulsed-field gel electrophoresis. About 18.5% of the library clones lacked inserts. The frequency of the BAC clones carrying chloroplast or mitochondrial DNA was 0.98% and 0.03%, respectively. The library represented approximately 4.9 haploid M. truncatula genomes. Hybridization of the BAC clone filters with a $C_{0}t-l$ DNA probe revealed that approximately 37% of the clones likely carried repetitive sequence-enriched DNA. An ordered array of pooled BAC DNA was screened by polymerase chain reactions using 13 sequence-characterized molecular markers that belonged to the eight linkage groups. Except for two markers, one to five positive BAC clones were obtained per marker. Accordingly, the sickle- and sunn-linked BAC clones identified herein will be useful for the isolation of these biotechnologically important genes. The new library will also provide clones that fill the gaps between preexisting BAC contigs, facilitating the physical mapping and genome sequencing of M. truncatula.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.323-330
• /
• 2008

Surrogate tissue analysis incorporating -omics technologies has emerged as a potential alternative method for evaluating toxic effect of the tissues which are not accessible for sampling. Among the recent applications, blood including whole blood, peripheral blood lymphocytes and peripheral blood mononuclear cells (PBMCs) was suggested as a suitable surrogate tissue in determining toxicant exposure and effect at the pre- or early clinical stage. In this application, we investigated transcriptomic profiles in astemizole treated Cynomolgus monkey's PBMCs. PBMCs were isolated from 4-6 years old male monkeys at 24 hr after administration45 Helvetica Light (10 mg/kg, 30 mg/kg). Gene expression profiles of astemizole treated monkey's PBMCs were determined using Affymetrix $GeneChip^{(R)}$ Human Genome U133 plus 2.0 arrays. The expression levels of 724 probe sets were significantly altered in PBMCs at 10 or 30 mg/kg after astemizole administration following determination of paired t-test using statistical criteria of ${\geq}$$1.5-fold changes at P<0.05. Gene expression patterns in PBMCs showed a considerable difference between astemizole 10 and 30 mg/kg administration groups in spite of an administration of the same chemical. However, close examination using Ingenuity Pathway Analysis (IPA) software revealed that several gene sets related to cardiotoxicity were deregulated at astemizole 10 and 30 mg/kg administration groups. The deregulation of cardiac hypertrophy related genes such as TXN, GNAQ, and MAP3K5 was observed at 10 mg/kg group. In astemizole 30 mg/kg group, genes involved in cardiotoxicity including cardiac necrosis/cell death, dilation, fibrosis, and hypertrophy were also identified. These results suggest that toxicogenomic approach using PBMCs as surrogate tissues will contribute to assess toxicant exposures and identify biomarkers at the pre-clinical stage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.255-255
• /
• 2011

Zinc oxide based thin films have been extensively studied in recent several years because they have very interesting properties and zinc oxide is non-poisonous, abundant and cheap material. ZnO films are employed in different applications like transparent conductive layers in solar cells, protective coatings and so on. Wide industrial application of the ZnO films requires of development of cheap, effective and scalable technology. Typically used technologies don't completely satisfy the industrial requirements. In the present work, we studied effect of the deposition parameters on the structure and properties of ZnO films deposited by DC arc plasmatron. The varied parameters were gas flow rates, precursor composition, substrate temperature and post-deposition annealing temperature. Vapor of Zinc acetylacetone was used as source materials, oxygen was used as working gas and argon was used as the cathode protective gas and a transport gas for the vapor. The plasmatron power was varied in the range of 700-1500 watts. Flow rate of the gases and substrate temperature rate were varied in the wide range to optimize the properties of the deposited coatings. After deposition films were annealed in the hydrogen atmosphere in the wide range of temperatures. Structure of coatings was investigated using XRD and SEM. Chemical composition was analyzed using x-ray photoelectron spectroscopy. Sheet conductivity was measured by 4-point probe method. Optical properties of the transparent ZnO-based coatings were studied by the spectroscopy. It was shown that deposition by a DC Arc plasmatron can be used for low-cost production of zinc oxide films with good optical and electrical properties. Increasing of the oxygen content in the gas mixture during deposition allow to obtain high-resistive protective and insulation coatings with high adhesion to the metallic surface.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.42.2-42.2
• /
• 2018

신도시 및 대규모 도시 개발이 진행됨에 따라 안정적이고 효율적인 전력 공급을 위해 다수의 지상 배전함이 설치되고 있으며, 이에 따라 불법 광고물 및 스티커의 부착으로 인한 문제가 발생하고 있다. 이를 해결하기 위하여 여러 기관 및 산업체에서는 부착 방지용 코팅 도료 및 시트에 대하여 다양한 연구개발을 진행하고 있으며, 현장에 적용 된 다수의 제품이 존재한다. 하지만 현재 대부분의 제품들은 약 1년 정도의 시간이 지나면 부착 방지 기능을 상실하며, 도료와 기판 또는 시트와 기판 사이의 박리가 일어나 도시의 미관을 더욱 해치는 결과를 초래하고 있다. 이러한 원인으로는 부착력(Peel resistance, N/cm)을 측정하는 기존의 제시된 방법(KS T 1028, Peel test)으로는 정확한 측정이 어렵기 때문에 제품 선별에 어려움이 있다. 일반 기판의 경우 규격에서 요구하는 각도($90^{\circ}$, $180^{\circ}$)가 잘 유지되어 정밀한 부착력 측정이 가능하지만, 저점착 기능성 코팅소재(Anti-adhesion coating)의 경우 부착 자체가 어렵기 때문에 요구 각도를 유지하기 어려워 정밀한 측정을 할 수 없다. 이러한 문제점들을 해결하고자 압입자(Probe)를 이용한 새로운 평가 장치와 방법(Tack test)을 개발 및 제시하였다. 평가 지표로는 최대 점착력(Adhesive force, N), 최대 점착력일 때 점착제가 늘어난 총 길이(Extension of adhesive, mm), 탈착 에너지(Energy, J)가 있으며, 인가하는 힘(N)이 커질수록, 탈착 속도(Velocity)가 빨라질수록 평가 지표 모두 값이 상승하는 경향성을 보인다. 각 시험방법(Peel test, Tack test)에 대한 테이프류 점착제와 기판과의 결합이 끊어지는(Debonding, 탈착) 메커니즘(Mechanism)은 점착제 기공(Cavity)의 형성, 결합이 끊어지는 힘(Debonding force, N), 힘의 평형(Force balance)로 설명 가능하며, 상호간의 관계성을 도출한다. 이와 같은 평가 지표를 활용하여 저점착 기능성 코팅소재에 대해 정밀한 평가를 하는 것으로, 향후 개발될 다양한 제품에 대한 성능 분별력을 높이고, 현장에 적용 될 제품들의 성능을 끌어 올려 기존에 발생한 다양한 문제점들을 해결 할 수 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with