• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 1996

The positive active material for polymer film battery was prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and 2.5-dimercapto-1, 3, 4-thiadiazole(DMcT) in various mixture ratio. The transference measurement of surface morphology and thermal stability of prepared composite film was carried out by using SEM and TGA, respectively. Electrocyhemical property and electrical conductivity of composite film were also measured by using cyclic voltammetry and four-probe method in dry box, respectively. The thermal stability of prepared composite film is more than 20$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 3 S/cm)when doped at 0.4% LiClO$_4$solution. And we could confirm that DMcT effect on reactiviation of PPD through cyclic voltammogram.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.314-317
• /
• 2004

On 9/5/2003, the planet probe “HAYABUSA” as MUSES-C project was launched by The Institute of Space and Astronautical Science. “HAYABUSA” has microwave discharge ion engines and these engines are characterized by their high efficiency and specific impulse in comparison with chemical engine. A large ion engine can be used as a planet explorer, while a small ion engine can be used as attitude control of small satellite. We have been developing a high thrust density microwave discharge ion engine using “Multi-Monopole Antenna”. The performance of this engine are: ion cost of 344W/A, propellant utilization efficiency of 52% and thrust density of 0.055mN/$\textrm{cm}^2$ for Kr gas flow rate of 2.5sccm, microwave(2.45㎓) power of 32W and acceleration voltage of l.4㎸.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1637-1639
• /
• 2005

The measurement of magnetic field is performed about DC and AC magnetic field in test track of depot. The test point is cap, on the converter/inverter box, on the traction motor, on the APSE and on the line filter, the height of measurement is bottom and 50 cm height. In case of AC magnetic field, the selected specific frequency is measured on the converter/inverter box. The AC magnetic field is checked and analysis through RS-232C and notebook PC. The DC magnetic field is measured by using the Hall Probe, test result is saved and analysis by PXI system. On the line filter, the maximum value is 1.4 mT in case of DC magnetic field and 0.044 mT in case of AC magnetic field at 50 Hz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.220-220
• /
• 2010

대향타겟식 스퍼터링 (Facing Target Sputtering, FTS) 장치를 이용하여 박막태양전지에 응용가능한 GAZO 박막을 플렉시블 기판 (PES) 위에 증착하였다 박막을 증착하는 데 쓰인 각각의 타겟은 AZO(ZnO:$Al_2O_3$=98:2w.t%) : GZO(ZnO:$Ga_2O_3$=97:3w.t%)이였으며, 다양한 스퍼터링 조건(공정압력, 입력 전력 및 박막의 두께)에서 증착 하였다. GAZO 박막의 전기적 특성은 Hall effect measurement, Four Point Probe, 광학적 특성은 UV-VIS spectrometer, 구조적 특성은 XRD, AFM, FE-SEM, 막의 두께는 $\alpha$-step profiler 장비를 이용하여 분석하였다. 가장 낮은 비저항은 작업 압력 1mTorr일 때 $5.123{\times}10^{-4}[\Omega-cm]$를 보였다. 또한 제작된 모든 박막은 (002)회절 피크로 우선성장함을 알 수 있었으며, 가시광선 영역(300nm-800nm)에서 80% 이상의 광 투과율을 나타냄을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제91권3호
• /
• pp.325-334
• /
• 2024

This paper deals with the dynamic buckling behavior of truncated conical shells composed of carbon nanotube composites, an important area of study in view of their very wide engineering applications in aerospace industries. In this regard, the effective material properties of the nanocomposite have been computed using the Mori-Tanaka model, which has already been established for such analyses. The motion equations ruling the structure's behavior are derived using first order shear deformation theory, Hamilton's principle, and energy method. This will provide adequate background information on its dynamic response. In an effort to probe the dynamic instability region of the structure, differential quadrature method combined with Bolotin's method will be adopted to tackle the resulting motion equations, which enables efficient and accurate analysis. This work considers the effect of various parameters in the geometrical parameters and the volume fraction of CNTs on the structure's DIR. Specifically, it became clear that increasing the volume fraction of CNTs shifted the frequency range of the DIR to higher values, indicating the significant role of nanocomposite composition regarding structure stability.

• 대한핵의학회지
• /
• 제33권1호
• /
• pp.100-109
• /
• 1999

목적: 핵의학장비를 구성하는 신호처리단의 전단증 폭기와 주증폭기는 방사선의 에너지 정보를 주는 펄스를 분석하는데 중요한 부분이다. 이러한 신호처리부분들은 대부분 크기가 표준화된 상용의 Nuclear Instrument Module (NIM)을 사용한파. 그러나, NIM은 이동형 감마프로브에 사용하기에는 너무 부피가 커서 부적합한 편이다. 이를 위해 본 연구는 이동형 감마프로브에 적합한 소형화된 전단증폭기와 주증폭기를 자체 제작하여 성능평가를 하였다. 대상 및 방법: 본 연구에서 제작된 전단증폭기는 전하민감형 전단증폭기였으며, 주증폭기는 capacitor resistor-resistor capcitor (CR-RC) 회로를 이용하여 제작되었다. 제작 후 성능평가를 위해 $2"{\times}2"$ NaI(T1) 섬광체가 부착된 EP-047 (Bicron Saint-Gobain/Norton Industrial Ceramics Co., Ohio, U.S.A) 검출기와 $1"{\times}1"$ NaI(T1) 섬광체가 부착된 R1535 (Ha-mamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) 검출기를 다중채널분석기인 AccuSpec/A (Canberra Industries Inc., Meriden Conneticut, U.S.A)를 이용 에너지 스펙트럼을 얻었다. NIM은 TC 145 (Oxford Instruments Inc., Oak Ridge, U.S.A)와 TC241 (Oxford Instruments Inc., Oak Ridge, U.S.A)을 이용하였다. 에너지 스펙트럼은 37 kBq ($1{\mu}Ci$) Cs-137과 2.96 MBq ($80{\mu}Ci$) Tc-99m의 방사선원을 이용하여 250초씩 얻었다. 결과: 자체 제작한 진단증폭기와 주증폭기를 EP-047 검출기와 연결하여 얻은 Tc-99m (140 keV)과 Cs-137 (662 keV)의 에너지 분해능은 각각 12.92%, 5.01%이었으며, R1535 검출기를 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 각각 13.75%, 5.19%이었다. 그리고 NIM을 EP-047 검출기와 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 14.6%, 718%이었으나, R1535 검출기를 연결하여 얻은 Cs-137 에너지 스펙트럼은 광봉우리 위치가 변화되어 안정되지 못하였고, Tc-99m의 에너지 스펙트럼은 쉽게 얻을 수 없었다. 결론: 본 연구에서 자체 제작한 전단증폭기와 주증폭기는 광증배관의 종류에 관계없이 우수한 성능을 보여주었다. 결론적으로, 본 연구에서 제작한 전단증폭기와 주증폭기는 소형화된 계수용 감마프로브와 영상용 감마프로브에 활용하는데 유용할 것이라고 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.123-124
• /
• 2008

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. Therefore we proposes a inspection system in this paper. it will be able to secure the objectivity of the prosecuting attorney using inspection system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• 한국미생물·생명공학회지
• /
• 제24권4호
• /
• pp.415-422
• /
• 1996

A gene coding for a pyruvyl transferase enzyme involved in exopolysaccharide biosynthesis of Zoogloea ramigera 115SLR was isolated and sequenced. A 4.5 kb of BamHI DNA fragment was isolated from chromosomal DNA using a probe derived from ketal pyruvyl transferase gene of Xanthomonas campestris. The nucleotide sequence of 2.66 kb Pst1/HindIII DNA fragment which was homology with a probe revealed the existence of two complete open reading frames (ORF2 and ORF3) and two partial open reading frames (ORFI and ORF4). The deduced amino acid sequence of ORF3 was homologous to the ketalase (GumL product) of X campestris with 49.5% of similarity and 21.6% of identity. ORF2 on the other hand showed the higher identity with the ketalase (ExoV product) of Rhizobium meliloti (36%) as well as the ketalase of X campestris (23%) than that of ORF3. A gene product of ORF2 was determined with a bacteriophage T7 RNA polymerase/promoter system in E. coli. The molecular weight of protein was 33,500 dalton.

• Journal of Photoscience
• /
• 제4권1호
• /
• pp.1-5
• /
• 1997

A hitherto unknown diphenylbutadiene analog viz. 1-(p-N,N-dimethylaminophenyl)-4-phenyl-2-methyl-1E,3E-butadiene (10) has been prepared and its absorption, excitation, and fluorescent emission properties in different media including various organic solvents and aqueous bovine serum albumin (BSA) have been studied. For comparision, these properties have also been investigated for the parent diphenylbutadiene (2). Diene 10 exhibits solvent polarity/polarizability-sensitive fluorescence properties ($\lambda$$_{max}$, $\Phi$$_f$, $\tau$$_f$, K$_f$, f). It also binds to the hydrophobic domains of aqueous bovine serum albumin (BSA) with a binding constant of 3.89 x 10$^4$ M$^{-1}$. The relative fluorescence quantum yield of 10 increases, while, the fluorescence lifetime decreases with increasing concentration of-BSA. The results highlight the polar character of the singlet excited state of diphenylpolyenes and the utility of 10 as fluorescence probe for studying microenvironments of organized assemblies and biological supramolecular structures.