• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.105-108
• /
• 1996

The positive active material for polymer film battery was prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and 2.5-dimercapto-1, 3, 4-thiadiazole(DMcT) in various mixture ratio. The transference measurement of surface morphology and thermal stability of prepared composite film was carried out by using SEM and TGA, respectively. Electrocyhemical property and electrical conductivity of composite film were also measured by using cyclic voltammetry and four-probe method in dry box, respectively. The thermal stability of prepared composite film is more than 20$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 3 S/cm)when doped at 0.4% LiClO$_4$solution. And we could confirm that DMcT effect on reactiviation of PPD through cyclic voltammogram.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.314-317
• /
• 2004

On 9/5/2003, the planet probe “HAYABUSA” as MUSES-C project was launched by The Institute of Space and Astronautical Science. “HAYABUSA” has microwave discharge ion engines and these engines are characterized by their high efficiency and specific impulse in comparison with chemical engine. A large ion engine can be used as a planet explorer, while a small ion engine can be used as attitude control of small satellite. We have been developing a high thrust density microwave discharge ion engine using “Multi-Monopole Antenna”. The performance of this engine are: ion cost of 344W/A, propellant utilization efficiency of 52% and thrust density of 0.055mN/$\textrm{cm}^2$ for Kr gas flow rate of 2.5sccm, microwave(2.45㎓) power of 32W and acceleration voltage of l.4㎸.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1637-1639
• /
• 2005

The measurement of magnetic field is performed about DC and AC magnetic field in test track of depot. The test point is cap, on the converter/inverter box, on the traction motor, on the APSE and on the line filter, the height of measurement is bottom and 50 cm height. In case of AC magnetic field, the selected specific frequency is measured on the converter/inverter box. The AC magnetic field is checked and analysis through RS-232C and notebook PC. The DC magnetic field is measured by using the Hall Probe, test result is saved and analysis by PXI system. On the line filter, the maximum value is 1.4 mT in case of DC magnetic field and 0.044 mT in case of AC magnetic field at 50 Hz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.220-220
• /
• 2010

대향타겟식 스퍼터링 (Facing Target Sputtering, FTS) 장치를 이용하여 박막태양전지에 응용가능한 GAZO 박막을 플렉시블 기판 (PES) 위에 증착하였다 박막을 증착하는 데 쓰인 각각의 타겟은 AZO(ZnO:$Al_2O_3$=98:2w.t%) : GZO(ZnO:$Ga_2O_3$=97:3w.t%)이였으며, 다양한 스퍼터링 조건(공정압력, 입력 전력 및 박막의 두께)에서 증착 하였다. GAZO 박막의 전기적 특성은 Hall effect measurement, Four Point Probe, 광학적 특성은 UV-VIS spectrometer, 구조적 특성은 XRD, AFM, FE-SEM, 막의 두께는 $\alpha$-step profiler 장비를 이용하여 분석하였다. 가장 낮은 비저항은 작업 압력 1mTorr일 때 $5.123{\times}10^{-4}[\Omega-cm]$를 보였다. 또한 제작된 모든 박막은 (002)회절 피크로 우선성장함을 알 수 있었으며, 가시광선 영역(300nm-800nm)에서 80% 이상의 광 투과율을 나타냄을 알 수 있었다.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.100-109
• /
• 1999

Purpose: Preamplifier and amplifier are very important parts for developing a portable counting or imaging gamma probe. They can be used for analyzing pulses containing energy and position information for the emitted radiations. The commercial Nuclear Instrument Modules (NIMs) can be used for processing these pulses. However, it may be improper to use NIMs in developing a portable gamma probe, because of its size and high price. The purpose of this study was to develop both preamplifier and amplifier and measure their performance characteristics. Materials and Methods: The preamplifier and amplifier were designed as a charge sensitive device and a capacitor resistor-resistor capacitor (CR-RC) electronic circuit, respectively, and they were mounted on a print circuit board (PCB). We acquired and analyzed energy spectra for Tc-99m and Cs-137 using both PCB and NIMs. Multichannel analyzer (Accuspec/A, Canberra Industries Inc., Meriden Connecticut, U.S.A) and scintillation detectors (EP-047(Bicron Saint-Gobain/Norton Industrial EP-047 (Ceramics Co., Ohio, U.S.A) with $2"{\times}2"$ NaI(T1) crystal and R1535 (Hamamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) with $1"{\times}1"$ NaI(T1) crystal were used for acquiring the energy spectra. Results: Using PCB, energy resolutions of EP-047 detectors for Tc-99m and Cs-137 were 12.92% and 5.01%, respectively, whereas R1535 showed 13.75% and 5.19% of energy resolution. Using the NIM devices, energy resolutions of EP-047 detector for Tc-99m and Cs-137 were measured as 14.6% and 7.58%, respectively. However, reliable energy spectrum of R1535 detector could not be acquired, since its photomultiplier tube (PMT) requires a specific type of preamplifier. Conclusion: We developed a special preamplifier and amplifier suitable for a small sized gamma probe that showed good energy resolutions independent of PMT types. The results indicate that the PCB can be used in developing both counting and imaging gamma probe.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.123-124
• /
• 2008

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. Therefore we proposes a inspection system in this paper. it will be able to secure the objectivity of the prosecuting attorney using inspection system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• Microbiology and Biotechnology Letters
• /
• v.24 no.4
• /
• pp.415-422
• /
• 1996

A gene coding for a pyruvyl transferase enzyme involved in exopolysaccharide biosynthesis of Zoogloea ramigera 115SLR was isolated and sequenced. A 4.5 kb of BamHI DNA fragment was isolated from chromosomal DNA using a probe derived from ketal pyruvyl transferase gene of Xanthomonas campestris. The nucleotide sequence of 2.66 kb Pst1/HindIII DNA fragment which was homology with a probe revealed the existence of two complete open reading frames (ORF2 and ORF3) and two partial open reading frames (ORFI and ORF4). The deduced amino acid sequence of ORF3 was homologous to the ketalase (GumL product) of X campestris with 49.5% of similarity and 21.6% of identity. ORF2 on the other hand showed the higher identity with the ketalase (ExoV product) of Rhizobium meliloti (36%) as well as the ketalase of X campestris (23%) than that of ORF3. A gene product of ORF2 was determined with a bacteriophage T7 RNA polymerase/promoter system in E. coli. The molecular weight of protein was 33,500 dalton.

• Journal of Photoscience
• /
• v.4 no.1
• /
• pp.1-5
• /
• 1997

A hitherto unknown diphenylbutadiene analog viz. 1-(p-N,N-dimethylaminophenyl)-4-phenyl-2-methyl-1E,3E-butadiene (10) has been prepared and its absorption, excitation, and fluorescent emission properties in different media including various organic solvents and aqueous bovine serum albumin (BSA) have been studied. For comparision, these properties have also been investigated for the parent diphenylbutadiene (2). Diene 10 exhibits solvent polarity/polarizability-sensitive fluorescence properties ($\lambda$$_{max}$, $\Phi$$_f$, $\tau$$_f$, K$_f$, f). It also binds to the hydrophobic domains of aqueous bovine serum albumin (BSA) with a binding constant of 3.89 x 10$^4$ M$^{-1}$. The relative fluorescence quantum yield of 10 increases, while, the fluorescence lifetime decreases with increasing concentration of-BSA. The results highlight the polar character of the singlet excited state of diphenylpolyenes and the utility of 10 as fluorescence probe for studying microenvironments of organized assemblies and biological supramolecular structures.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.111-114
• /
• 2003

A new monitoring system has been developed for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone was obtained by converting the normalized intensity into ozone concentration. The FOTDP system reflected the ideal transport phenomena of gas phase ozone at various flow rates. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of SOM. However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.