• 제목/요약/키워드: T/R probe

검색결과 96건 처리시간 0.025초

Ag Grid를 이용한 플렉시블 투명 전극의 투명 안테나 특성 연구

  • 조충기;김한기
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.27.2-27.2
    • /
    • 2011
  • 본 연구에서는 저저항/고투과 플렉시블 투명 전극 개발을 위해 금속 그리드가 적용된 투명 전극을 개발하였다. Lift off 공정을 도입하여 플렉시블 PET 기판 위에 Ag grid를 성막하고 이후 연속 공정이 가능한 Roll-to-Roll sputtering system을 이용하여 최적화된 ITO(40nm)/Ag(12nm)/ITO(40nm) 다층 투명 전극을 성막하였다. 제작된 플렉시블 투명 전극의 전기적, 광학적, 구조적 특성 및 기계적/전기적 안정성 평가를 위해 four-point probe measurement, Hall effect measurement, UV/Vis spectrometer, scanning electron microscopy 및 bending tester를 이용하여 각각의 특성을 분석하였다. Ag grid가 적용된 ITO/Ag/ITO 투명 전극에서 Ag의 배선 간격이 0.75 mm일 때 0.18 ohm/sq. 의 낮은 면 저항과 가시광선 영역에서 80% 이상의 높은 투과율을 나타내었으며, 이러한 저저항 및 고투과율 특성으로 인해 최적화된 배선 간격 0.75 mm에서 $538.11{\times}10^{-3}\;ohm^{-1}$의 매우 높은 figure of merit ($T^{10}/R_{sh}$) 값을 확보할 수 있었다. 기계적 응력에 따른 전기적 안정성 특성 분석 결과 5,000회 이상의 bending cycle 에서도 초기 저항 값과 유사한 전기적 특성을 나타냄으로써 Ag grid가 적용된 ITO/Ag/ITO 플렉시블 투명 전극의 기계적 응력에 따른 전기적 안정성을 확인할 수 있었다. Ag grid가 적용된 ITO/Ag/ITO 투명 전극의 투명 안테나 적용 가능성을 타진하기 위해 low band 및 high band 영역에서의 안테나 효율을 측정하였으며, 모든 영역에서 상용화된 copper 안테나와 유사한 효율을 나타내었다. Ag grid를 이용한 플렉시블 투명 전극의 저저항/고투과율 특성은 플렉시블 광전소자의 투명 안테나로의 적용 가능성을 나타낸다.

  • PDF

닭 인터페론 유전자의 클로닝에 관한 연구 (MOLECULAR CLONING OF CHICKEN INTERFERON-GAMMA)

  • 송기덕;;한재용
    • 한국가금학회:학술대회논문집
    • /
    • 한국가금학회 1999년도 제16차 정기총회및학술발표회
    • /
    • pp.34-50
    • /
    • 1999
  • A cDNA encoding chicken interferon-gamma (chIFN-${\gamma}$) was amplified from P34, a CD4$^{+}$ T-cell hybridoma by reverse transcription-polymerase chain reaction (RT-PCR) and cloned into pUC18. THe sequences of cloned PCR products were determined to confirm the correct cloning. Using this cDNA as probe, chicken genomic library from White Leghorn spleen was screened. Phage clones harboring chicken interferon-gamma (chIFN-${\gamma}$) were isolated and their genomic structure elucidated. The chIFN-${\gamma}$ contains 4 exons and 3 introns spanning over 14 kb, and follows the GT/AG rule for correct splicing at the exon/intron boundaries. The four exons encode 41, 26, 57 and 40 amino acids, respectively, suggesting that the overall structure of IFN-${\gamma}$ is evolutionairly conserved in mammalian and avian species. The 5’-untranslated region and signal sequences are located in exon 1. Several AT-rich sequences located in the fourth exon may indicate a role in mRNA turnover. The 5’-flanking region contains sequences homologous to the potential binding sites for the mammalian transcription factors, activator protein-1(AP-1) activator protein-2(AP-2) cAMP-response element binding protein(CREB), activating transcription factor(ATF), GATA-binding fator(GATA), upstream stimulating factor(USF), This suggests that the mechanisms underlying transcriptional regulation of chicken and mammalian IFN-${\gamma}$ genes may be similar.r.

  • PDF

전자빔 증착법으로 제작한 Cu 박막의 부착력과 저항율 특성 (The Resistivity Properties and Adhesive Strength of Cu Thin firms Fabricated by EBE Method)

  • 백상봉;신중홍
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.422-426
    • /
    • 2003
  • Cu thin films of $6000{\AA}$ thickness were deposited by Electron Beam Evaporation(EBE) method on the glass. The resistivity properties and adhesion of Cu thin films were investigated by various annealing and substrate temperature. Cu thin films were annealed in the air and vacuum condition for 10 min after the deposition. The resistivity and adhesion(the force required to separate films from substrates) was measured by 4-point probe and scratch testing. The resistivity of non-annealing Cu thin films was distinguished more substrate temperature loot than substrate temperature R.T, $200^{\circ}C$. In the case of air condition annealing, as heating temperature was increased, the resistivity was decreased. In the case of vacuum condition annealing, the resistivity was increased at heating temperature $200^{\circ}C$. The best resistivity($1.72\;{\mu}{\Omega}{\cdot}cm$) of Cu thin films was obtained by the air condition heating temperature $200^{\circ}C$ at the substrate heating temperature $100^{\circ}C$. As a result of scratch testing, adhesion was increased by annealing. And maximum adhesion had 600 gf.

  • PDF

Cloning된 효모의 RNAI 유전자의 특성에 관하여 (Characterization of the cloned RNA1 gene of Saccharomyces cerevisiae)

  • 송영환;김대영;김진경
    • 한국어병학회지
    • /
    • 제6권2호
    • /
    • pp.93-101
    • /
    • 1993
  • 효모의 RNAI유전자는 RNA processing에 관여 하는지 혹은 RNA transport에 관여 하는지 아직까지 유전자의 기능이 정확히 알려져 있지 않은 실정이다. 효모의 RNAI 유전자의 기능을 파악하기 위한 방법으로 본 연구에서는 rna1-1 mutant gene을 cloning하여 이에 대한 DNA sequence를 조사함으로써 RNAI 유전자와 rna1-1 유전자의 차이점을 이해하고자 하였다. rna1-1 marker를 갖는 yeast strain(R49)로 부터 genomic DNA를 추출하여 이를 BglII로 절단하여 genomic southern blotting을 행한 결과 wild type의 경우와 동일하게 3.4 kb에서 hybridization되는 signal을 얻었으며, RNAl 및 rna1-1이 yeast genome내에 single site로 존재함을 보여 주는 결과를 얻었다. mutant strain으로 부터 얻은 3.4 kb의 BglI fragment를 pUC19의 BamHI site에 subcloning하여 transformant들을 얻었고, wild type RNAl 유전자를 probe로 하여 rna1-1 mutant 유전자를 cloning할 수 있었다. pUC19에 cloning된 RNA1유전자 및 rna1-1유전자로부터 다양한 Ba131유도체를 얻어 이들에 대한 염기 서열을 비교한 결과 transcription initation site에서부터 down stream쪽으로 17 아미노산위치에 TCC가 TTC로 대치되어 있었으며 그 결과 serine이 phenylalanine으로 변환되는 결과를 얻었다. Wild type RNAI gene의 5'-region에는 3군데의 TATA-like sequence가 true TATA box인지 확인하기 위하여 Bal3I deletion에 의해 -103nt까지 deletion된 유도체를 얻었으며 ${\Delta}RNAI$, rna1-1, 81-2-6 clone이 rna1-1 allele와 complementation한지 확인하였으나 ${\Delta}RNAI$은 TS-complementation을 하지 못하였다. 따라서 현재까지 TATA-box라고 알려진 부분은 promoter로 작용하지 못함을 확인하였다.

  • PDF

Identification of the bphC Gene for meta-Cleavage of Aromatic Pollutants from a Metagenomic Library Derived from Lake Waters

  • Moon Mi-Sook;Lee Dong-Hun;Kim Chi-Kyung
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제9권5호
    • /
    • pp.393-399
    • /
    • 2004
  • Useful genes can be Screened from various environments by construction of metagenomic DNA libraries. In this study, water samples were collected from several lakes in mid Korea, and analyzed by T-RFLP to examine diversities of the microbial communities. The crude DNAs r were extracted by the SDS-based freezing-thawing method, and then further purified using an $UltraClean^{TM}$ kit (MoBio, USA). The metagenomic libraries were constructed with the DNAs partially digested with EcoR I, BamH I, and Sac II in Escherichia coli DH 10B using the pBACe3.6 vector. About 44.0 Mb of metagenomic libraries were obtained with average inserts 13-15 kb in size. The bphC genes responsible for degradation of aromatic hydrocarbons via mets-cleavage were identified from the metagenomic libraries by colony hybridization using the bphC specific sequence as a probe. The 2,3-dihydroxybiphenyl (2, 3-DHBP) dioxygenase gene (bphC ), capable of degradation of 2,3-DHBP, was cloned and its nucleotide Sequences analyzed. The genes consisted of 966 and 897 base pairs with an ATG initiation codon and a TGA termination codon. The activity of the 2,3-DHBP dioxygenase was highly expressed to 2,3-DHBP and Showed a broad substrate range to 2,3-DHBP, catechol, 3-methylcatechol and 4-methylcatechol. These results in-dicated that the bphC gene identified from the metagenomes derived from lake water might be useful in the development of a potent strain for degradation of aromatic pollutants.

Neutron-shielding behaviour investigations of some clay-materials

  • Olukotun, S.F.;Mann, Kulwinder Singh;Gbenu, S.T.;Ibitoye, F.I.;Oladejo, O.F.;Joshi, Amit;Tekin, H.O.;Sayyed, M.I.;Fasasi, M.K.;Balogun, F.A.;Korkut, Turgay
    • Nuclear Engineering and Technology
    • /
    • 제51권5호
    • /
    • pp.1444-1450
    • /
    • 2019
  • The fast-neutron shielding behaviour (FNSB) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated using effective removal cross section, ${\Sigma}_R(cm^{-1})$, mass removal cross section, ${\Sigma}_{R/{\rho}}(cm^2g^{-1})$ and Mean free path, ${\lambda}$ (cm). These parameters decide neutron shielding behaviour of any material. A computer program - WinNC-Toolkit has been used for computation of these parameters. The toolkit evaluates these parameters by using elemental compositions and densities of samples. The proficiency of WinNC-Toolkit code was probe by using MCNPX and GEANT4 to model fast neutron transmission of the samples under narrow beam geometry, intending to represent the actual experimental setup. Direct calculation of effective removal cross section ($cm^{-1}$) of the samples was also carried out. The results from each of the methods for each types of the studied clay-materials (Ball clay and Kaolin) shows similar trend. The trend might be the fingerprint of water content retained in each of the samples being baked at different temperature. The compositions of each sample have been obtained by Particle-Induced X-ray Emission (PIXE) technique (Tandem Pelletron Accelerator: 1.7 MV, Model 5SDH). The FNSB of the selected clay-materials have been compared with standard concrete. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their FNSB.

PRAM용 Cu-도핑된 Ge8Sb2Te11 박막의 특성 (Characteristics of Cu-Doped Ge8Sb2Te11 Thin Films for PRAM)

  • 김영미;공헌;김병철;이현용
    • 한국전기전자재료학회논문지
    • /
    • 제32권5호
    • /
    • pp.376-381
    • /
    • 2019
  • In this work, we evaluated the structural, electrical and optical properties of $Ge_8Sb_2Te_{11}$ and Cu-doped $Ge_8Sb_2Te_{11}$ thin films prepared by rf-magnetron reactive sputtering. The 200-nm-thick deposited films were annealed in a range of $100{\sim}400^{\circ}C$ using a furnace in an $N_2$ atmosphere. The amorphous-to-crystalline phase changes of the thin films were investigated by X-ray diffraction (XRD), UV-Vis-IR spectrophotometry, a 4-point probe, and a source meter. A one-step phase transformation from amorphous to face-centered-cubic (fcc) and an increase of the crystallization temperature ($T_c$) was observed in the Cu-doped film, which indicates an enhanced thermal stability in the amorphous state. The difference in the optical energy band gap ($E_{op}$) between the amorphous and crystalline phases was relatively large, approximately 0.38~0.41 eV, which is beneficial for reducing the noise in the memory devices. The sheet resistance($R_s$) of the amorphous phase in the Cu-doped film was about 1.5 orders larger than that in undoped film. A large $R_s$ in the amorphous phase will reduce the programming current in the memory device. An increase of threshold voltage ($V_{th}$) was seen in the Cu-doped film, which implied a high thermal efficiency. This suggests that the Cu-doped $Ge_8Sb_2Te_{11}$ thin film is a good candidate for PRAM.

구리 안정화재가 있는 YBCO 박막형 초전도 선재의 과전류 통전 특성 (Over-current characteristics of YBCO coated conductors having Cu stabilizer)

  • 임성우;두호익;김혜림;현옥배;손송호;임지현;황시돌;오성용;한병성
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제10권1호
    • /
    • pp.10-14
    • /
    • 2008
  • Differently from BSCCO tapes which are fabricated by powder-in-tube method, the coated conductors are made by the evaporation of YBCO on metal substrate. Due to this structural merit, although the coated conductors are generally used for large current transportation, they are expected to be favorable to the purpose of the fault current limitation as well. In this study, using YBCO coated conductor having copper stabilizer formed by plating technique(produced by Superpower Co.), we investigated the over-current characteristics of the coated conductor. The coated conductors had 85 A $I_c$ and 90 K $T_c$. The resistance of the conductor was 0.93 $m{\Omega}/cm$ at 300 K and 0.17 $m{\Omega}/cm$ at the temperature right above $T_c$. To the coated conductors, we applied the voltages of the range from 150 $V_{rms}$ to 230 $V_{rms}$ and measured the V-I curves using four probe method. From the results, we could analyze the electric behavior of the coated conductor in flux flow state. As the current exceed $I_c$, the currents were distributed into the superconductor and metal stabilizer. The amounts of the currents shared through both current paths were calculated under the assumption that the ,Joule heating was perfectly eliminated by $LN_2$ surrounding the conductor. Finally, the condition for the stable current flowing state which does not affect the conductor was established from the analysis on the over-current characteristics.

Synthesis and Comparative Analysis of Crystallite Size and Lattice Strain of Pb2Ba1.7Sr0.3Ca2Cu3O10+δ Superconductor

  • Hasan, Maher Abd Ali;Jasim, Kareem Ali;Miran, Hussein Ali Jan
    • 한국재료학회지
    • /
    • 제32권2호
    • /
    • pp.66-71
    • /
    • 2022
  • In this article, Pb2Ba1.7Sr0.3Ca2Cu3O10+δ superconductor material was synthesized using conventional solid-state reaction method. X-ray diffraction (XRD) analysis demonstrated one dominant phase 2223 and some impurities in the product powder. The strongest peaks in the XRD pattern were successfully indexed assuming a pseudo-tetragonal cell with lattice constants of a = 3.732, b = 3.733 and c = 14.75 Å for a Pb-Based compound. The crystallite size and lattice strain between the layers of the studied compound were estimated using several methods, namely the Scherrer, Williamson-Hall (W.H), size-strain plot (SSP) and Halder Wagner (H.W) approach. The values of crystallite size, calculated by Scherrer, W.H, SSP and H.W methods, were 89.4540774, 86.658638, 87.7555823 and 85.470086 Å, respectively. Moreover, the lattice strain values obtained by W.H, SSP and H.W methods were 0.0063240, 0.006325 and 0.006, respectively. It was noted that all crystallite size results are consistent; however, the best method is the size-strain plot because it gave a value of R2 approaching one. Furthermore, degree of crystallites was calculated and found to be 59.003321%. Resistivity analysis suggests zero-resistance, which is typical of superconducting materials at critical temperature. Four-probe technique was utilized to measure the critical temperature at onset Tc(onset), zero resistivity Tc(off set), and transition (width ΔT), corresponding to temperatures of 128 K, 116 K, and 12 K, respectively.

한국인에서의 페닐케톤뇨증의 유전자변이에 대한 고찰 (The Study of DNA Mutations of Phenylketonuria in Koreans)

  • 유수정;홍용희;이용화;정성철;기창석;이동환
    • Journal of Genetic Medicine
    • /
    • 제5권1호
    • /
    • pp.26-33
    • /
    • 2008
  • 목 적 : 페닐케톤뇨증은 상염색체 열성으로 유전되는 아미노산 대사질환으로 PAH와 조효소인 $BH_4$의 활성이 저하되어 발생한다. 본 연구에서는 PAH 유전자 돌연변이와 임상양상과의 연관성을 조사하였고 PAH DNA 변이의 국가간의 차이를 분석하였다. 방 법 : 페닐케톤뇨증 환자와 환자 가족의 동의하에 DNA를 말초혈액의 백혈구에서 분리하여 PAH 유전자를 PCR을 통해 증폭하여 유전자 서열을 분석하였고 PAH 돌연변이가 하나의 대립유전자에서만 발견이 되거나 없는 경우는 분석된 서열을 MLPA를 시행하여 분석을 하였다. 결 과 : 유전자 검사를 시행한 102명의 대립유전자 204개 중 199개의 돌연변이가 발견되어 97%의 검출률을 보였다. 발견된 돌연변이는 총 44가지의 유전자형으로 9개는 novel missense mutation이었고 1개는 novel splice site mutation이었다. 가장 많은 대립 유전자형은 R243Q와 $IVS4^{-1}$G>A로 각각 13.1%와 11.6%를 나타내었다. 전형적 페닐케톤뇨증에서는 R243Q와 $IVS4^{-1}$G>A가 각각 14.2%를 차지하였고 $BH_4$ 반응형 페닐케톤뇨증의 경우에는 R241C가 33.3%, 양성 고페닐알라닌혈증이 R241C가 40%에서 나타났다. $BH_4$ 반응형 페닐케톤뇨증의 경우에는 약물 치료만으로 조절이 되는 환자에서 T278I와 V388M mutation이 발견되었고 약물 치료만으로 조절이 되지 않고 식사요법을 병행해야하는 환자들에서만 K95del과 A447P의 돌연변이가 나타났다. 그리고 2004년 이전에는 동양인에게서 A259T 대립유전자 돌연변이가 발견되지 않은 것으로 보고되었으나 본 연구에서는 10.1%에서 발견되었다. 결 론 : 페닐케톤뇨증과 관련된 새로운 유전자 변이들이 발견되고 있으며 $BH_4$에 반응하는 유전자 변이들의 유전자형들이 확인되면서 PAH 유전자 분석은 페닐케톤뇨증 환자에서 진단, 유전상담, 식사 요법과 치료 계획 수립에 기여할 것이다.

  • PDF