• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.157-162
• /
• 2020

Blind rivet nuts are increasingly used in automotive for the joining of sheets. Their application, however, requires appropriate design guides to prevent catastrophic events arising from the failure of joints. In this study, the shaft shape of a frequently used M8 blind rivet nut is optimized based on 3D numerical analysis of the blind rivet nut considering the characteristics of thread. The thread needs to be modeled to suitably consider the fastening of the M8 bolt after the crimping process. FE analysis showed that while the friction in the contact between crimp flange and plate has no significant effect on the crimp geometry, shaft thickness (t) and shaft height (h) are the most significant design variables. The parameter study including various combinations of t and h reveals that they affect the gap (the distance between the crimped flange and the plate that develops through riveting) and the load acting on the plate. The gap is an indicator of the tightening force. It is found that t is inversely proportional to the gap, and proportional to the load, whereas h is proportional to the gap and inversely proportional to the load. Based on our FE analysis results, we propose the range 0.062 < t/h < 0.1 to ensure sufficient fastening (high clamping load, small gap) of the M8 blind rivet nut. The design guide for determining the t/h ratio proposed in this study can be used for general quantitative analysis of the size and the t/h ratio of blind rivet nuts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.44-54
• /
• 1990

The purpose of this study was to investigate the effects of thickness of the sleeping pad on the physiological responses and the microclimate in the heating ondol room during sleeping time. The measuring points were skin temp., weight loss and body movement as physiological responses and the compression ratio, the temp. on/under the sleeping pad, the inside limp. of the sleeping quilts and subjective sence while 7 hours sleeping. Thickness of sleeping pads was 27.2 mm(A), 34.8 mm (B), 47.9 mm(C) used for 90 days and no used pad 60.7 mm(D). The floor surface temp. was keeping $29{\pm}1^{\circ}C$ while the environmental conditions was at $23{\pm}1^{\circ}C$ ($50{\pm}5\%$ R.H.) The results were as followings; 1) The mean compression ratio after using the sleeping pads for 45 days was about $70\%$ , and it wasn't increased any more thereafter 2) After 2 hours sleeping the temp. under the sleeping pads was shown that C and D were higher than A and B, and the temp. on the sleeping pads was shown that A and C pads were higher than B and D. But after 3-4 hours sleeping the skin temp. of legs was shown that B and D pads were higher than A and C. 3) Weight loss for C pad was significantly higher than others. Body movement and side position in tying was higher in A and C pads than B and D. 4) The inside temp. of quilt for A and C pads were higher in the early part of sleeping period than those of B and C pads and relative humidity was lower in C than others. 5) D pad was softer than others and fatigue degree was turned out to be lowest in D, the highest in A. From this point of view, we concluded that thickness of the sleeping Pad in the heating ondol room had different characteristic from that in no heating ondol room. And 35 mm used pad was turned out to be proper.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1193-1195
• /
• 1995

The superconducting properties of YBaCuO thin films prepared by pulsed laser deposition(PLD) have been investigated. The x-ray diffraction patterns of the films are substantially different from one another. The YBaCuO thin films manufactured at the 20% of Argon mixture ratio were indicated $T_c$(zero)=88.2 K, $T_c$(onset)=92.1 K, and $J_c=9.0{\times}10^4A/cm^2$(at 77.3K).

• The Korean Journal of Emergency Medical Services
• /
• v.5 no.1
• /
• pp.15-22
• /
• 2001

This study has measured the pulmonary function by treadmill test for 6 young women who were in twenties, and analyzed the respiratory-circulatory function and the change of hormone and immune response after performing the exercise program (60% severity) for 10 weeks. The results are as follows; 1. 10 weeks regular exercise made a decrease in weight and body fat proportion, and improved the respiratory-circular function by increasing the maximum oxygen absorption and ventilation. 2. 10 weeks regular exercise made a significant increase in count of WBC, lymphocyte, and T lymphocyte, but a significant decrease in B lymphocyte. NK cell also showed an increase in counts, but insignificant. 3. 10 weeks regular exercise made a significant increase in blood norepinephrine level. Epinephrine and cortisol also showed an increase in count, but insignificant. In summary, it suggested that 10 weeks regular exercise improves the immune function by decrease in body fat, increase in respiratory-circular function and metabolic efficiency, and also by raising Th/Ts ratio (an increase in count of WBC, lymphocyte, and T lymphocyte, but a decrease in suppressor T lymphocyte).

• Journal of Ginseng Research
• /
• v.18 no.3
• /
• pp.151-159
• /
• 1994

To evaluate the anticarcinogenic effect and its mechanism of red ginseng, the mice were treated with red ginseng and received subcutaneous Bl6 melanoma cell line injection on the back. Tumor incidence was same (100%) both in water and red ginseng-treated groups, but tumor production was delayed in red ginseng-treated group. Survival time was somewhat longer in red ginseng-treated group. The histopathological findings were similar in both groups, but lymphocytic infiltration around the tumor and melanin production in the tumor cells were prominent in the red ginseng-treated group. Flow cytometric analysis on T lymphocytes and natural killer cells revealed increased $T_H$/$T_S$ ratio and increased NK cells in red ginseng-treated group. These results suggest that the anticarcinogenic effect of red ginseng may be exerted by the increased cell-mediated immunity and natural killer cell activity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.166-173
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for an electrical vehicle body has been performed through T-peel joint tests with the design parameters such as joint style, adherend type, adherend thickness, adhesive thickness, and various adhesives. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the zero stress ratio. It was observed that the fatigue strength of the joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the fatigue strength of the joint increases insignificantly. An aluminum-FRP adherend combination shows much higher fatigue strength than an aluminum-aluminum adherend combination. The results of fatigue tests were found to be consistent with those of static tests.

• Journal of Dairy Science and Biotechnology
• /
• v.40 no.2
• /
• pp.86-91
• /
• 2022

Chryseobacterium mulctrae KACC 21234^T is a novel species isolated from raw bovine milk. Psychrotrophic bacteria are considered contaminants and are hypothesized to originate from the environment. In this investigation, the C. mulctrae KACC 21234^T genome was determined to be 4,868,651 bp long and assembled into four contigs with a G+C ratio of 33.8%. In silico genomic analyses revealed the presence of genes encoding proteases (endopeptidase Clp, oligopeptidase b, carboxypeptidase) and lipases (phospholipase A(2), phospholipase C, acylglycerol lipase) that can catalyze the degradation of the proteins and lipids in milk, causing its quality to deteriorate. Additionally, antimicrobial resistance and putative bacteriocin genes were detected, potentially intensifying the pathogenicity of the strain. The genomic evidence presented highlights the need for improved screening protocols to minimize the potential contamination of milk by proteolytic and lipolytic psychrotrophic bacteria.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.40-44
• /
• 1986

The cassegrain antenna, 32metor , diameter, is designed for the satellite earth station at Boun. It is fed by a beam waveguide of type. The results of measurements G/T (Gain to Noise Temperature ratio) is 40.86dB/K at the elevation elevation angle 5˚ for 4GHz. And the average transmit and receive gain are 64.62dB and 61.3dB, respectively. They satisfy the values designed for the antenna. The sidelobe levels of the pattern also are in good accord with the recommendation of C.C.I.R.

• Journal of Nutrition and Health
• /
• v.32 no.4
• /
• pp.430-436
• /
• 1999

This study investigated the correlations among nutrient intakes, and immune status in Korean young women in relation to body mass index(BMI). Subjects were classified as underweight, normal or overweight, with anthropometric measurements of these three groups significatly different in terms of weight, body fat, waist measurement, hip measurement, waist/hip ratio(WHR), and skindfold thickness(p<0.001). Average vitamin A, vitamin B1, vitamin B2, calcium and zinc levles were lower than the Korean RDA. Vitamin A levels were found to be significantly correlated with BMI(p<0.05). There was no significant difference in total T and B lymphocytes or IgG, IgG, and IgM levels with respect to BMI, but Natural Killer(NK) cell levels were found significantly increased with increased BMI(p<0.05). BMI was also positively correlated with iron intake and negatively correlated with vitamin A intake in the normal group. Based upon this study, further research on nutritional, immune and trace-mineral status of overweight and underweight young women is required for better health promotion in this female populaton.

• Geomechanics and Engineering
• /
• v.5 no.4
• /
• pp.299-312
• /
• 2013

The horizontal pullout capacity of a group of two vertical strip plate anchors, placed along the same vertical plane, in a fully cohesive soil has been computed by using the lower bound finite element limit analysis. The effect of spacing between the plate anchors on the magnitude of total group failure load ($P_{uT}$) has been evaluated. An increase of soil cohesion with depth has also been incorporated in the analysis. For a weightless medium, the total pullout resistance of the group becomes maximum corresponding to a certain optimum spacing between the anchor plates which has been found to vary generally between 0.5B and B; where B is the width of the anchor plate. As compared to a single plate anchor, the increase in the pullout resistance for a group of two anchors becomes greater at a higher embedment ratio. The effect of soil unit weight has also been analyzed. It is noted that the interference effect on the pullout resistance increases further with an increase in the unit weight of soil mass.