• 한국해양공학회지
• /
• 제6권2호
• /
• pp.76-84
• /
• 1992

In this study, corrosion fatigue test of SAPH45 steel was performed by the use of plane behavior of base metal (BM) and heat affected zone (HAZ) of SAPH45. The main results obtained are as follows: 1) The more aspect ratio (b/t) of corner crack decreases, the more aspect ratio (b/a) takes greatly effect by corrosion. 2) The correlation between the stress intensity factor range ($\Delta$k) and crack growth rate (da/dN) for weldment in seawater is given by Paris rule as follow: da/dN=C($\Delta$K) super(m). Where m is constant, and the value is 3.82-3.84. 3) The accelerative factor ($\alpha$) of BM and HAZ under seawater is about 1.1-1.9, and ($\alpha$) of HAZ increases more and more under the low $\Delta$K region. 4) HAZ is more susceptible to corrowion than BM because of potential of electrode (E sub(c)) of HAZ becomes more less noble potential than that of BM.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.149-156
• /
• 2006

For an aspect ratio (transport length-to-width) of 5, Pr = 2.89, Le = 0.018, Pe = 2.29, Cv = 1.11, $P_B$=40 Torr, solutally buoyancy-driven convection $(Gr_s=3.03{\times}10^5)$ due to the disparity in the molecular weights of the component A $(Hg_2Cl_2)$ and B (He) is stronger than thermally buoyancy-driven convection $(Cr_t=1.66{\times}10^4)$. The crystal growth rate is decreased exponentially for $2.5\;{\leq}\;Ar\;{\leq}\;5$, with (1) the linear temperature profile and a fixed temperature difference, (2) the imposed thermal profile, a fixed crystal region and varied temperature difference. This is related to the finding that the effects of side walls tend to stabilize convection in the growth reactor. But, with the imposed thermal profile, a fixed source region and varied temperature difference, the rate is increased far $2\;{\leq}\;Ar\;{\leq}\;3$, and remains nearly unchanged for $3\;{\leq}\;Ar\;{\leq}\;5$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.274-284
• /
• 2002

Deep drawing process for rectangular drawn section is different with that for axisymmetric circular one. Therefore deep drawing process for rectangular drawn section requires several intermediate steps to generate the final configuration without any significant defect. In this study, finite element analysis for multi-stage deep drawing process for high precision rectangular cases is carried out especially for an extreme aspect ratio. The analysis is performed using rigid-plastic finite element method with an explicit time integration scheme of the commercial program, LS-DYNA3D. The sheet blank is modeled using eight-node continuum brick elements. The results of analysis show that the irregular contact condition between blank and die affects the occurrence of failure, and the difference of aspect ratio in the drawn section leads to non-uniform metal flow, which may cause failure. A series of experiments for multi-stage deep drawing process for the rectangular cases are conducted, and the deformation configuration and the thickness distribution of the drawn rectangular cases are investigated by comparing with the results of the numerical analysis. The numerical analysis with an explicit time integration scheme shows good agreement with the experimental observation.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1393-1404
• /
• 2005

Fatigue crack growth and life have been estimated based on established empirical equations. In this paper, an alternative method using artificial neural network (ANN) -based model developed to predict fatigue damages simultaneously. To learn and generalize the ANN, fatigue crack growth rate and life data were built up using in-plane bending fatigue test results. Single fracture mechanical parameter or nondestructive parameter can't predict fatigue damage accurately but multiple fracture mechanical parameters or nondestructive parameters can. Existing fatigue damage modeling used this merit but limited real-time damage monitoring. Therefore, this study shows fatigue damage model using backpropagation neural networks on the basis of X -ray half breadth ratio B / $B_o$, fractal dimension $D_f$ and fracture mechanical parameters can estimate fatigue crack growth rate da/ dN and cycle ratio N / $N_f$ at the same time within engineering limit error ($5\%$).

• 한국의학물리학회지:의학물리
• /
• 제21권1호
• /
• pp.70-77
• /
• 2010

골다공증 환자를 대상으로 이중 에너지 X선 흡수(DEXA) 방법을 이용한 골밀도 영상에서는 T-score를 측정하고 자기공명영상 기법 중 확산강조영상에서는 신호대 잡음비와 현성 확산 계수를 측정한 다음 T-score변화에 따라 신호대 잡음비와 현성 확산 계수가 어떻게 변화하는지 알아보았다. 골다공증이 없는 건강한 사람 30명과 2009년 1월부터 2009년 12월까지 허리 통증으로 내원한 환자 중 단순 방사선 촬영에서 골다공증 소견이 보이는 환자 30명을 대상으로 Dual Energy X-ray Absorptiometry (DEXA)를 이용하여 척추 L1-L4부위의 T-score를 측정 후 각각의 척추에 대해서 골감소증, 골다공증으로 분류하였다. 1.5T MR scanner를 이용하여 b value를 $400\;s/mm^2$으로 획득한 확산강조영상에서는 L1-L4 네 부위에서 신호 강도(signal intensity)측정을 하였고 현성 확산 계수(apparent diffusion coefficient; ADC) map 영상에서는 현성 확산 계수를 측정하였다. 정량적 분석방법으로 관심영역의 T-score와 신호대 잡음비(signal to noise ratio)와 ADC를 구하고 평균화 하여 관심영역에서 T-score변화에 따른 신호대 잡음비와 현성확산계수의 변화를 비교하였고 T-score에 의해 골감소증, 골다공증으로 분류하여 그룹별로 신호대 잡음비와 현성확산계수의 변화도 비교하였다. 정성적인 분석방법은 육안적으로 건강한 그룹과 골감소증, 골다공증그룹의 T1강조 시상면 영상에서 요추체중 L4 부위에서의 신호강도 차이를 알아보았다. 정량적 분석에서 골감소증 그룹과 골다공증그룹은 T-score가 감소함에 따라 확산강조영상에서의 신호대 잡음비가 감소하여 나타났으며 골다공증 그룹에서 신호대 잡음비가 가장 크게 감소하였다. ADC map영상에서는 골감소증그룹과 골다공증 그룹은 T-score가 감소함에 따라 현성 확산 계수는 감소해서 나타났고 건강한 그룹과 골감소증 및 골다공증 그룹의 경우 현성 확산 계수 차이는 골다공증 그룹에서 현성 확산 계수가 가장 낮게 나타났다. 정성적 분석에서는 건강한 그룹과 골감소증 및 골다공증 그룹에서 L4 부위의 신호강도는 건강한 그룹에서 가장 낮게 나타났고 골다공증그룹에서 높게 나타났다. 골다공증이 진행 될수록 신호대 잡음비와 현성 확산계수는 감소하고 T1강조 영상에서는 신호강도가 증가 하는 결과를 얻었고 자기공명검사가 골다공증 진단에 유용함을 알 수 있었다.

• Journal of the Korean Statistical Society
• /
• 제33권4호
• /
• pp.411-433
• /
• 2004

The shrinkage preliminary test ridge regression estimators (SPTRRE) based on Wald (W), Likelihood Ratio (LR) and Lagrangian Multiplier (LM) tests for estimating the regression parameters of the multiple linear regression model with multivariate Student's t error distribution are considered in this paper. The quadratic biases and risks of the proposed estimators are compared under both null and alternative hypotheses. It is observed that there is conflict among the three estimators with respect to their risks because of certain inequalities that exist among the test statistics. In the neighborhood of the restriction, the SPTRRE based on LM test has the smallest risk followed by the estimators based on LR and W tests. However, the SPTRRE based on W test performs the best followed by the LR and LM based estimators when the parameters move away from the subspace of the restrictions. Some tables for the maximum and minimum guaranteed efficiency of the proposed estimators have been given, which allow us to determine the optimum level of significance corresponding to the optimum estimator among proposed estimators. It is evident that in the choice of the smallest significance level to yield the best estimator the SPTRRE based on Wald test dominates the other two estimators.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.330-339
• /
• 2016

A magnetic field sensing system with a single primary sensor and multiple reference sensors deployed locally and orthogonally, was proposed for downlink signal reception and interference cancelling for Through-the-Earth Communication (TEC). This paper mathematically analyzes a design optimization process for a search coil magnetometer (SCM), and applies that process to minimize the bandwidth of the primary SCM for TEC signal reception and the volume of reference SCMs for multiple distributions. The primary SCM achieves a 3-dB bandwidth of 7 Hz, a sensitivity threshold of 120 fT/${\surd}$Hz, and a volume of $2.32{\times}10^{-4}m^3$. The entire sensing system volume is as small as $10^{-2}m^3$. Experiments with interference from industrial frequency harmonics demonstrated an average of 36 dB and 18 dB improvements in signal-to-interference ratio and signal-to-interference plus noise ratio, respectively, using multichannel recursive-least-squares algorithm. Thus, the proposed sensing system can reduce the interference effectively and allows reliable downlink signal reception.

• 한국통신학회논문지
• /
• 제28권11C호
• /
• pp.1161-1168
• /
• 2003

본 논문에서는 음성검출의 성능을 향상시킬 목적으로 정합 필터를 이용한 음성향상 전처리 과정을 통하여 SNR을 개선한 후, 이를 LLR(Log Likelihood Ratio) 검사에 의한 최적 결정방법을 적용하여 확률적인 모델을 기준으로 하는 향상된 음성검출 방법을 제안한다. 또한 기존의 음성검출 방법들에서는 제시되지 않았던 문턱값 갱신 알고리즘을 제안하며, 이 방법을 통해서 기존의 방법들에서 성능이 좋지 않았던 낮은 SNR 환경에서도 음성검출을 할 수 있게 되었다. 마지막으로 컴퓨터 시뮬레이션을 통하여 이미 상용화되어 널리 이용중인 G.729B(ITU-TG.729 Annex B)의 음성검출 결과와 비교를 통해서 제안한 음성검출 방법의 성능의 우수성을 검증하며, 실제적인 환경에도 적용이 가능함을 보인다.

• Environmental Analysis Health and Toxicology
• /
• 제13권1_2호
• /
• pp.33-41
• /
• 1998

Chlorpyrifos, o,o diethyl-o-(3,5,6-trichloro-2-pyridyl) phosphorothioate, is a broad spectrum organophosphate insecticide. The use of chlorpyrifos has been increased more and more as pesticide. But the effects of chlorpyrifos on the immune alterations has not been yet observed. Therefore, we investigated the effects of chlorpyrifos on the immune alterations in CICA male mice. Chlorpyrifos was administered to mice by a single intraperitoneal injection for the purpose of observing acute effects. On the one hand to get the information on immunopathologic alterations we observed hematological values, counted total circulating leukocytes and assessed the ratio of lymphocytes and neutrophils from the peripheral blood, measured the ratio of organ/body weight and counted splenic cellularity in CBA male mice which treated chlorpyrifos intraperitoneally. But we could not find any significant immunopathologic alterations statistically by a single intraperitoneal injection. Also, the exposure of chlorpyrifos caused no significant change in the number of PFC/10$^6$ spleen cells at any three given doses. On the other hand a singte intraperitoneal injection of chlorpyrifos decreased the lymphocyte proliferation response slightly to ConA or LPS stimulation at a dose of 6 mg/kg b.w. Administrations of chlorpyrifos reduced mixed leukocyte response(MLR). MLR was decreased moderately at doses of 3mg/kg b.w. and 6mg/kg b.w. Therefore, all these findings suggest that chlorpyrifos may alter the immune functions acutely. especially by the changes of T lymphocyte activity.

• Advances in concrete construction
• /
• 제5권4호
• /
• pp.359-375
• /
• 2017

This paper presents a study of the properties and behavior of self-compacting concretes (SCC) in the hot climate. The effect of curing environment and the initial water curing period on the properties and behavior of SCC such as compressive strength, ultrasonic pulse velocity (UPV) and sorptivity of the SCC specimens were investigated. Three Water/Binder (W/B) ratios (0.32, 0.38 and 0.44) have been used to obtain three ranges of compressive strength. Five curing methods have been applied on the SCC by varying the duration and the conservation condition of SCC. The results obtained on the compressive strength show that the period of initial water curing of seven days followed by maturation in the hot climate is better in comparison with the four other curing methods. The coefficient of sorptivity is influenced by W/B ratio and the curing methods. It is also shown that the sorptivity coefficient of SCC specimens is very sensitive to the curing condition. The SCC specimens cured in water present a low coefficient of sorptivity regardless of the ratio W/B. Furthermore, the results show that there is a good correlation between ultrasonic pulse velocity and the compressive strength.