• 제목/요약/키워드: T$_{}$ 50/

검색결과 8,135건 처리시간 0.037초

3T MR 스핀에코 T1강조영상에서 적정의 숙임각 (3T MR Spin Echo T1 Weighted Image at Optimization of Flip Angle)

  • 배성진;임청환
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권2호
    • /
    • pp.177-182
    • /
    • 2009
  • 목 적 : 영상진단영역에서 이용되고 있는 3T(T, tesla) MR의 스핀에코(SE, spin echo) T1강조영상(T1-Weighted image)기법에서 숙임각(FA, flip angle)의 변화에 따른 영상의 질을 나타내는 신호대 잡음비(SNR, signal to noise ratio), 대조도 잡음비(CNR, contrast to noise ratio)를 평가한 후 특이흡수율(SAR, specific absorption rate)을 줄이면서 CNR를 향상시킬 수 있는 적정의 숙임각을 알아보고자 하였다. 대상 및 방법 : 고식적 스핀에코에서 통상적으로 사용하는 90$^\circ$ RF pulse 대신 50$^\circ$ RF pulse에서 130$^\circ$까지 10$^\circ$씩 증가시키면서 대뇌 T1강조영상을 획득하였다. 이 영상들에서 백질(WM, white matter), 회백질(GM, gray matter)과 배경(background)에서 각각 신호강도를 측정하여 SNR를 구하였고, 기존의 T1 이완곡선 R1 = 1- exp ($\frac{-TR}{T1}$)으로, 즉 Ernst angle cos $\theta$ = exp ($\frac{-TR}{T1}$)과의 관계성으로 T1강조영상에서 WM과 GM의 SNR과 CNR의 정규성 검정과 비모수 검정인 Kruskal-wallis 분석으로 적정의 숙임각을 알아보고자 하였다. 결 과 : WM와 GM의 신호강도와 배경잡음 신호강도를 이용하여 SNR를 구한 결과 WM의 SNR는 숙임각 50$^\circ$보다 130$^\circ$에서 1.6배 정도 증가하였고, GM의 SNR는 약 1.9배 정도 높게 나타났다. 두 조직의 SNR은 T1 이완곡선과 동일한 양상을 보여주고 있다. R1 = 1- exp ($\frac{-TR}{T1}$)으로 분석한 SNR의 신호증가가 둔화되는 기점이 WM은 120$^\circ$의 숙임각에서, GM은 110$^\circ$ 이후로 나타나 두 조직에서 다르게 나타나는 것을 알 수 있었다. WM과 GM의 SNR는 130$^\circ$의 숙임각에서 높았지만 CNR에 있어서는 80$^\circ$에서 최고 높게 나타났으며, 80$^\circ$ 전후의 숙임각에서는 감소하였다. 결론 : 3.0T MR의 SE T1강조영상 기법에서 숙임각의 증가에 따라 SNR는 증가하였지만 CNR는 이전까지의 임상에서 사용하는 숙임각이 90$^\circ$ 보다 적은 80$^\circ$에서 CNR이 최고로 나타나 통상적으로 사용하는 숙임각보다 10$^\circ$ 낮은 RF pulse duration time 사용함으로써 3T에서 문제로 제기된 SAR도 줄일 수 있었다. 앞으로 3.0T MR의 SE T1강조영상 기법에서 적정 숙임각을 사용함으로서 CNR을 높일 수 있을 것으로 기대되어진다.

  • PDF

고삼 추출물을 이용한 해독물질의 개발 (Development of Antitoxic Agents from Sophora flavescens Ait.)

  • 양희태;정승일;이영철;윤경아;백승화
    • 한국식품영양학회지
    • /
    • 제15권1호
    • /
    • pp.36-41
    • /
    • 2002
  • 고삼 메탄올 추출물로부터 분리한 flavonoids를 IR, NMR등의 분광학적인 방법으로Leachianone A(LA)과 Sophoraflavanone G(SFG)로 동정하였고, 카드뮴의 세포독성효과를 고삼 및 고삼추출물이 방어할 수 있는 지를 검색하기 위하여 NIH 3T3 세포에 고삼 및 LA와 SFG, LA+SFG를 처리하고 MTT assay 및 광학현미경으로 세포의 생존률을 검색하여 다음과 같은 결론은 얻었다. MTT의 흡광도는 카드뮴의 농도에 의존하여 감소 하였으며, $IC_{50}$/인 MTT50은 12.5$\mu$M이었으며 카드뮴을 $IC_{50}$/농도로 처리하고 고삼 및 LA, SFG, LA+SFG를 각 화합물의 자체 세포독성을 갖지 않는 농도로 처리한 후 MTT assay로 세포 생존률을 측정한 결과 LA, SFG, LA+SFG 처리군들은 카드뮴 처리군(MTT$_{50}$)에 비해 세포생존률이 증가되었으며 이들은 고삼 및 고삼 추출물의 농도에 의존적으로 증가되었고 각각의 단일 화합물보다 두 화합물 LA+SFG병용처리군에서 수복 효과가 더 좋은 것으로 나타났으며 광학현미경적 소견에서도 세포재생이 뚜렷하게 보였다. 이상과 같은 고삼에서 분리한 flavonoids가 카드뮴 독성에 의하여 손상된 NIH 3T3 섬유아세포의 재생효과에 영향이 있는 것으로 판단된다.다.

부유물질이 해산무척추동물 생존에 미치는 영향평가 (Assessment of the impact of suspended solids on the survival of marine invertebrates)

  • 박진혁;윤성진
    • 환경생물
    • /
    • 제40권3호
    • /
    • pp.275-280
    • /
    • 2022
  • 부유물질은 수생생물의 성장과 생존에 중요한 역할을 한다. 본 논문은 cyst에서 부화한 Artemia 유생(branchiopoda), 조간대에서 채집한 T. west (copepod)와 H. koreanus (amphipoda)를 사용하여 96시간 동안 부유물질에 노출된 생물의 생존 영향을 규명하였다. 실험 결과 Artemia 유생과 T. west의 생존율은 50.0mg L-1 이상의 부유물질 농도에 영향을 받지 않으나 H. koreanus는 부유물질 농도가 증가함에 따라 낮은 생존율을 보였다(p<0.05). 결론적으로 50.0mg L-1 이상의 부유물질에 지속적으로 노출된 Artemia 유생과 T. west는 미세한 생태 스트레스의 영향을 받지만 H. koreanus는 생존 가능한 내성범위를 벗어나 사망한 개체가 증가할 것으로 판단된다.

낙지다리(Penthorum chinense Pursh.) 종자 발아에 대한 온도와 Gibberellin처리의 영향 (The Effects of Temperature and Gibberellin Treatment on Seed Germination of Penthorum chinense Pursh.)

  • 송치현;이미현;박초희;김상근;오범석;안민우;김양수;송기선;나채선;김순영
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2020년도 춘계학술대회
    • /
    • pp.34-34
    • /
    • 2020
  • 희귀식물(LC)인 낙지다리(Penthorum chinense Pursh.)는 '수택란', '차근채'로 불리며 약용으로 사용되어 왔으나, 최근 하천개수 및 습지매립 등으로 자생지가 파괴되어 개체수가 급감하고 있다. 따라서 본 연구는 낙지다리의 종 보존 및 활용을 위하여 종자의 최적발아조건을 확인하고자 수행하였다. 종자는 2017년 국립백두대간수목원에서 수집되어 연구에 사용되기 전까지 건조 상태(15℃, 15% RH)로 시드뱅크(-20℃, 40% RH)에 저장하고 있었다. 종자의 최적발아조건을 확인하기 위하여, 항온과 변온 66조건에서 발아율과 최종발아율의 50%가 발아하는데 소요되는 일 수(T50)를 조사하였으며, 생리적 휴면 타파를 위해서 GA3(20~1000 mg·L-1) 처리 후 발아율과 T50을 조사하였다. 그리고 GA3 처리에 따른 유묘 생장에 대한 GA3의 영향을 확인하기 위하여 종자 치상 30일 후 유근·아 생장에 대한 영향을 조사하였다. 낙지다리 종자는 항온보다 변온에서 발아율 증가와 T50 감소를 보였다. 특히 낮/밤의 온도 차가 11~25℃일 때, 85%이상의 발아율을 보였고, 그 이상의 온도차이가 나면 발아율은 감소하는 경향을 보였다. T50은 온도차가 증가할수록 감소하여, 발아가 균일하며 빨라지는 것을 확인 할 수 있었다. 또한 GA3 처리시 생리적 휴면 타파가 진행되어 발아율(79.8%~100%)과 발아속도가 증가(T50 감소)함을 확인하였으나, GA3 100mg·L-1 이상의 농도에서는 무처리(21.2m)에 비하여 유근의 길이 생장을 0.11~6.88mm로 지연시켰다.

  • PDF

Priming 처리기간 및 온도가 당근, 상추, 양파 및 파 종자의 발아력 향상에 미치는 영향 (Effect of Priming Duration and Temperature on the Germinability of Carrot, Lettuce, Onion, and Welsh Onion Seeds)

  • 정연옥;김종철;조정래
    • 원예과학기술지
    • /
    • 제18권3호
    • /
    • pp.327-333
    • /
    • 2000
  • Priming시 처리기간과 처리온도가 종자의 발아성에 미치는 효과를 구명하고자 하였다. 이때 사용한 약제는 당근은 -0.50MPa PEG 8000, 상추는 50mM $K_3PO_4$, 양파는200mM $KH_2PO_4$, 파는 100 mM $Ca(NO_3)_2$였으며, 작물별로 처리기간은 12시간에서 5일, 처리온도는 $10^{\circ}C$에서 $25^{\circ}C$까지로 달리하였다. 당근의 발아율은 종자처리와 처리온도에 따른 유의차가 있었으며, $20^{\circ}C$에서 3일 priming시 T50 및 MDG 단축에 효과적이었다. 그리고 $20^{\circ}C$에서 4일처리시 priming 용액속에 유근이 14% 돌출되었다. 상추의 발아율은 종자처리와 처리기간에 따라 유의차가 있었다. $20^{\circ}C$에서 2일 priming시 발아율이 높고 T50과 MDG 단축에 효과적이었으며 유근돌출은 발생하지 않았다. 양파의 발아율은 종자처리, 처리기간 및 처리온도 모두에서 유의차가 있었다. $10^{\circ}C$ 혹은 $15^{\circ}C$에서 3일, 4일 및 5일 처리시 발아율은 향상되지 않았으나 T50과 MDG 단축에는 효과적이었으나, priming 기간이 3일에서 5일로 길어질수록 발아율은 낮아졌다. 파의 발아율은 처리기간 및 처리온도에 따른 유의차가 없었지만, $15^{\circ}C$에서 4일 처리시 T50 및 MDG 단축에 효과적이었고 $15^{\circ}C$ 혹은 $20^{\circ}C$에서 처리기간이 길어질수록 유근돌출이 많이 발생되었다.

  • PDF

알바시아나무톱밥 첨가에 따른 병재배용 느타리버섯의 생육특성 (Effect of albasia sawdust in Pleurotus ostreatus by bottle cultivation)

  • 장명준;이윤혜;강영주;주영철
    • 한국버섯학회지
    • /
    • 제12권1호
    • /
    • pp.8-11
    • /
    • 2014
  • 느타리버섯 재배를 위해 알바시아나무톱밥과 기존에 사용하고 있던 포플러톱밥, 미송톱밥이 어떠한 차이점이 있는지 조사하기 위해 본 실험을 수행하였다. 톱밥재료별로 혼합하여 배지의 이화학성 및 수량성을 검토한 결과 재료별 일반성분 중 C/N은 미송톱밥에서 504로 가장 높았고, T-N은 알바시아나무톱밥에서 4.03%로 가장 높았다. 페놀계화합물의 경우 알바시아나무톱바에서 21.65%로 가장 높았다. 혼합배지에 따른 이화학성 중 pH는 처리구별 모두 5.1~5.2로 차이가 크게 나지 않았고, C/N범위는 처리구 모두 이와 대등한 경향을 보였으며, 그 중 T2가 20으로 가장 작았다. 혼합배지별 경시적 균사생장량을 조사한 결과 T1, T3 및 T4는 모두 대등한 경향이었으나 T2의 경우 배양일수가 25일로 가장 늦었다. 혼합배지별 생육특성은 크게 차이가 나지 않았으나 유효경수는 T2를 제외한 모든 처리구에서 대등하였고, T2에서 가장 작았다. 알바시아나무톱밥을 기존의 미루나무톱밥이나 미송톱밥을 전량 대체할 수는 없었으나 기존 톱밥의 50%정도를 대체할 경우 수량과 회수율에서 모두 대등한 결과를 보였다.

Optimum Conditions for Tobacco Seed Priming by PEG 6000

  • Tai-Gi, Min;Byung-Moon, Seo
    • 한국작물학회지
    • /
    • 제44권3호
    • /
    • pp.263-266
    • /
    • 1999
  • Tobacco (Nicotiana tabacum L. ‘KF109’) seeds were primed in polyethylene glycol 6000 (PEG 6000) solutions to determine a) what osmotic potential of the solution would be optimal for priming, i.e., critical potential level for preventing germination, and b) what temperature and duration would be the most effective in priming. The germination was completely prevented below -0.8 MPa of PEG 6000, that indicates a optimum water potential for seed priming. Seeds were primed for 0, 1, 2, 3, 5, 10 and 15 days at 15, 20 and $25^{\circ}C$, respectively, under the-0.8 MPa PEG 6000 solution to find out the most effective temperature and duration for priming. The effectiveness of priming, particularly in germination speed, was observed more distinctly when the primed seeds were germinated at 15$^{\circ}C$ than 2 5$^{\circ}C$. The greatest reduction of the time to 50% germination (T/sob 50/) was when the seeds were primed at $25^{\circ}C$. The reduction rate of the $T_{50}$ was rapid when primed from 1 day to 8 days and then slowed down in the seeds primed for longer than 8 days. The time from 10 to 90% germination ( $T_{10-90}$ increased in the primed seeds for longer than 8 days which showed the reversed effect of synchronous germination. However, $T_{50}$ was reduced continuously in the seeds even primed over 8 days. Thus, the optimum condition for tobacco seeds priming with PEG 6000 solution was -0.8 MPa in osmotic potential of the solution at $25^{\circ}C$ for 8 days.ays.

  • PDF

The Effects of Total Mixed Ration Feeding with High Roughage Content on Growth Performance, Carcass Characteristics, and Meat Quality of Hanwoo Steers

  • Ku, Min Jung;Mamuad, Lovelia;Nam, Ki Chang;Cho, Yong Il;Kim, Seon Ho;Choi, Young Sun;Lee, Sang Suk
    • 한국축산식품학회지
    • /
    • 제41권1호
    • /
    • pp.45-58
    • /
    • 2021
  • This study investigated the dietary effect of total mixed ration (TMR) based on high roughage content on the growth performance, carcass characteristics, and meat quality of Hanwoo steers. Twenty-four Hanwoo steers (average body weight, 195.3±4.7 kg; age, 8.5 mon) were randomly allocated to three experimental groups according to forage and concentrate ratio (DM basis): 25:75 (control), 50:50 (T50), and 70:30 (T70). Productivity in the fattening period and final body weight were significantly higher in the control. Average daily gain and feed conversion ratio were the same among treatments. Serum parameters, cholesterol, blood urea nitrogen, and total protein were higher in the control. Carcass weight was comparable in the control and T50 but feeding more roughage was significantly correlated with a higher intramuscular fat. Shear strength and drip loss were higher while n-6/n-3 was lower in T70 compared to the other groups. However, meat color was not significantly different among treatments. In terms of free amino acid contents, glutamic acid and glycine were higher in the control than T50 and T70. Overall, feeding Hanwoo steers with high forage content TMR had the lowest n-6/n-3 ratio of fatty acid content but highest intramuscular fat, shear strength, and drip loss. High forage content TMR is the best feed for Hanwoo steers that gives more benefits for human health and consumption but also provides the best meat grade and quality, which is important in the beef market in Korea.

Evaluation of RPV according to alternative fracture toughness requirements

  • Lee, Sin-Ae;Lee, Sang-Hwan;Chang, Yoon-Suk
    • Structural Engineering and Mechanics
    • /
    • 제53권6호
    • /
    • pp.1271-1286
    • /
    • 2015
  • Recently, US NRC revised fracture toughness requirements as 10CFR50.61a to reduce the conservatism of 10CFR50.61. However, unlike previous studies relating to the initial regulation, structural integrity evaluations based on the alternative regulation are not sufficient. In the present study, PTS and P-T limit curve evaluations were carried out by using both regulations and resulting data were compared. With regard to the PTS evaluation, the results obtained from the alternative requirements were satisfied with the criterion whereas those obtained from the initial requirements did not meet the criterion. Also, with regard to the P-T limit curve evaluation, operating margin by 10CFR50.61a was greater than that by 10CFR50.61.

Sulfamerazine-Sugar Glass Dispersion의 용출속도에 관한 연구 (The Effect on the Dissolution Rate of Sulfamerazine from Sugar Glass Dispersion System)

  • 구영순;성경수
    • 약학회지
    • /
    • 제34권3호
    • /
    • pp.192-198
    • /
    • 1990
  • Three sugar glass dispersions of sulfamerazine were prepared using dextrose, galactose and sucrose as the carriers, with the ratio of the drug to the carrier was 1:9. The chemical stability of sulfamerazine in the glass dispersion system was studied using TLC. TLC revealed no additional spot and there was good correspondence with the Sulfamerazine itself. While time required to dissolve 50%($T_{50%}$) of sulfamerazine powder was 390 min that of dextrose glass dispersion system was 1.5 min. and galactose system was 4.0 min. in distilled water. 23) $T_{50%}$ of physical mixture with dextrose, galactose and sucrose were 26.4 min., 26.5 min., and 26.0 min. respectively in distilled water. $T_{50%}$ of control was 54 min. and those of all of the glass dispersion systems were within 1 min. in 0.1N HCl. The dissolution rates of sulfamerazine from sugar glass dispersion system in distilled water was greater than that in 0.1N HCl.

  • PDF