• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.198-204
• /
• 2007

The modelling and design of the PCV(Pressure Control Valve) for passenger car CVT(Continuously Variable Transmission) are considered in this paper. For analysis and design, the simulation model of the PCV is derived by using commercial software, AMESim. For a good design of the PCV, the sensitivity analysis for design parameters is carried out and the static and dynamic characteristics of the developed PCV are experimented. The simulation and experimental results are presented to show the validity of the design process.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.342-348
• /
• 2013

As a number of wind power generation systems have been installed in power systems in the world, frequency fluctuations due to output power variations from wind farms have become a serious problem. Battery systems have been studied for smoothing the output variations and decreasing the resulting frequency fluctuations. Among these studies, efficient design of battery systems is one of the most important subjects from a point of view of cost. This paper presents a comparative analysis of the smoothing effect between the conventional moving average method and a new method based on frequency response analysis.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.178-182
• /
• 2007

Topology optimization methods are classified into two methods such as the density method and the homogenization method. Those methods need to consider relationships between the material property and the density of each element in a design domain, the relaxation of the design space, etc. However, it is hard to apply on some cases due to the complexity to compose the design objective and its sensitivity analysis. In this paper, a modified topology optimization is proposed to assist designers who do not have mathematical or theoretical background of the topology optimization. In this study, optimal topology of structures can be achieved by the sequential design of experiment (DOE) and the sensitivity analysis. We conducted the DOE with an orthogonal array and the sensitivity analysis of design variables to determine sensitive variables used for connectivity between elements. The modified topology optimization method has advantages such as freedom from penalizing intermediate values and easy application with basic DOE concept.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2018

In the energy-guzzling industries such as steel making and cement, power plants utilizing waste heat have been attracting attention to increase energy efficiency. However, the existing economic analysis system doesn't consider the special working fluids and the cost models of the main equipment used in the waste heat recovery power plant. So it is difficult to estimate the plant economics accurately. Therefore, It is required to develop a economic analysis module that can more accurately evaluate for the power plant. In this study, the systems engineering approach was used to design and develop the module that systematically reflects the characteristics of the power plant and various requirements. Specifically, first, the special working fluids and main equipment applied to the power plant were investigated. Next, the cost models for each equipment were developed. Finally, the economic analysis module based on this was developed.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.61-73
• /
• 2015

The early-phase naval ship design demands requirements synthesis rather than design synthesis, which conducts engineering design for several domains on a detailed level. Requirements synthesis focuses on creating a balanced set of required operational capabilities satisfying user's needs and concept of operations. Requirements are evolved from capability based languages to function based language by statistical exploration and engineering design which are derived in the following order: concept alternative, concept baseline, initial baseline and functional baseline. The early-phase naval ship design process can be divided into three passes: concept definition, concept exploration and concept development. Main activities and outcomes in each pass are shortly presented. Concept definition is the first important step that produces a concept baseline through extensive design space exploration promptly. Design space exploration applies a statistical approach to explore design trends of existing ships and produce feasible design range corresponding to concept alternative. It further helps naval systems engineers and operational researchers by inducing useful responses to user and stakeholders' questions at a sufficient degree of confidence and success in the very early ship design. The focus of this paper is on the flow of design space exploration, and its application to a high-speed patrol craft. The views expressed in this paper are those of the authors, and do not reflect the official policy or rule of the Navy.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.84-89
• /
• 2022

For system maintenance optimization, it is necessary to establish a state information system by CBM+ including CBM and RCM, and sensor selection for CBM+ application requires system process for function model analysis at the early design stage. The study investigated the contents of CBM and CBM+, analyzed the function analysis tasks and procedures of the system, and thus presented a D-FMEA based sensor selection inference methodology at the early stage of design for CBM+ application, and established it as a D-FMEA based sensor selection inference process. The D-FMEA-based sensor inference methodology and procedure in the early design stage were presented for diesel engine sub assembly.

• Structural Engineering and Mechanics
• /
• v.8 no.2
• /
• pp.165-180
• /
• 1999

The cost effectiveness of using steel roof systems for residential buildings is becoming increasingly apparent with the decrease in manufacturing cost of steel components, reliability and efficiency in construction practices, and the economic and environmental concerns. While steel has been one of the primary materials for structural systems, it is only recently that its use for residential buildings is being explored. A comprehensive system for the design of residential steel roof truss systems is presented. In the first stage of the research the design curves obtained from the AISI-LRFD code for the manufactured cross-sections were verified experimentally. Components of the truss systems were tested in order to determine their member properties when subjected to axial force and bending moments. In addition, the experiments were simulated using finite element analysis to provide an additional source of verification. The second stage of the research involved the development of an integrated design approach that would automatically design a lowest cost roof truss given minimal input. A modified genetic algorithm was used to handle sizing, shape and topology variables in the design problem. The developed methodology was implemented in a software system for the purpose of designing the lowest cost truss that would meet the AISI code provisions and construction requirements given the input parameters. The third stage of the research involved full-scale testing of a typical residential steel roof designed using the developed software system. The full scale testing established the factor of safety while validating the analysis and design procedures. Evaluation of the test results indicates that designs using the present approach provide a structure with enough reserve strength to perform as predicted and are very economical.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.166-178
• /
• 2000

As the 21st century signifies an information-oriented society, the computer integration takes place in all walks of human presence. Needs for computer and network-integrated automation present new challenges in military as well as commercial facility systems engineering. Since the first intelligent building appeared in USA in 1984, it gradually became an essential capability for the building industry requirement these days. Intelligent Building System(IBS) is evolving to be very complex because there are many subsystems such as telecommunication(TC), office automation(OA), building automation(BA), security, construction environments, etc. During the planing phase of IBS development, therefore, a disciplined systems engineering must be performed to analyze stake- holder's requirements to build an optimized system while minimizing trial-and-error expenses and risks. This paper presents a conceptual design of BAS applying systems engineering methods. The contribution of this study includes the development of IBS subsystem specification for building automation subsystem, which is a part of IBS, using the methodology of requirement analysis, functional analysis, synthesis, and verification. A computer-aided systems engineering s/w, RDD-100, was used to improve the system design efficiency and to promote the product design knowledge management for reuse in later design programs.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.205-212
• /
• 1997

The major subject of this paper is the conceptual design of a cable-buoy system based on mechanics of floating bodies and mooring lines. The goal is to present a systematic relevant analysis procedure for the conceptual design of oceanographic buoy systems. The dynamics of a free floating body with an anchoring line is studied and a model is proposed through the primary engineering.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.904-913
• /
• 2011

Previous publications regarding the design and specifications of input filters for STATCOMs usually deal with the input filter only, and seldom pay any attention to the influence of the input filters on the performance of the STATCOM systems. A detailed analysis of the influences of input filters on the stability of STATCOM systems and the corresponding design considerations are presented in this paper. Three types of input filters, L filters, LC filters, and LCL filters, are examined separately. The influences of the parameters of input filters on system stability are investigated through frequency domain methods. With direct current control taken as the major control strategy for the STATCOMs, the different situations when adopting different current detection points are covered in this analysis. A comparison between LC filters and LCL filters is also presented with optimized filter parameters. Based on the analysis, the phase margin, as one of the design considerations for the different types of input filters under different current detection schemes, is discussed. This leads to filter parameters that are different than those of the traditional design. Hardware experimental results verify the validity of the above analysis and design.