• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.335-342
• /
• 2014

This paper describes the forming conditions of smart-phone curved glass using the glass molding system with force applying system. The force applying system is composed of a body, a motor and gear, a rectilinear movement structure, a force sensor, a LVDT sensor (Linear Variable Differential Transformer), a up and down moving block, and so on. The glass molding system for characteristic test to find the forming conditions consists of the force applying system and a chamber, a metallic mold, a upper heater, a lower heater and so on. The characteristic test for forming conditions of smart-phone curved glass was carried out at forming temperature $620^{\circ}C$ and $650^{\circ}C$ using the glass molding system. As a result of the characteristic test, the forming conditions of curved glass could be found, and it is thought that the conditions can be used to apply to the system for producing in large quantities.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.327-335
• /
• 2007

A new optimization scheme and some key techniques are proposed in the development of a vehicle glass drop design software system. The key issues of the design system are how to regenerate the glass surface and make the vehicle glass drop down along the glass channels. To resolve these issues, a parameterized model was created at first, in which the optimizing method and Knowledge Fusion techniques were adopted the optimized process was then written into the glass drop design system by coding with C language and UGS/Open Application Programme Interface functions etc. Therefore, the designer or engineer can simulate the process of glass dropping along the channels to assess the potential interference between glass and door accessory by using this software system. All of the testing results demonstrate the validity of the optimizing scheme, and the parametric design software effectively solves the key issues on development of the door accessory package.

• 약학회지
• /
• 제34권3호
• /
• pp.192-198
• /
• 1990

Three sugar glass dispersions of sulfamerazine were prepared using dextrose, galactose and sucrose as the carriers, with the ratio of the drug to the carrier was 1:9. The chemical stability of sulfamerazine in the glass dispersion system was studied using TLC. TLC revealed no additional spot and there was good correspondence with the Sulfamerazine itself. While time required to dissolve 50%($T_{50%}$) of sulfamerazine powder was 390 min that of dextrose glass dispersion system was 1.5 min. and galactose system was 4.0 min. in distilled water. 23) $T_{50%}$ of physical mixture with dextrose, galactose and sucrose were 26.4 min., 26.5 min., and 26.0 min. respectively in distilled water. $T_{50%}$ of control was 54 min. and those of all of the glass dispersion systems were within 1 min. in 0.1N HCl. The dissolution rates of sulfamerazine from sugar glass dispersion system in distilled water was greater than that in 0.1N HCl.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.75-80
• /
• 2015

Nowadays, flat-shaped cover glass is widely used for mobile devices. However, for its good design and convenience of use, curved cover glass has been demanded. Thus, many companies have tried to produce curved cover glass through the shaving technique, but the production efficiency is very low. Therefore, the molding technique has been adopted to increase the efficiency for the curved-glass production system. For a glass-molding system, several heating blocks are installed, and the flat cover glass is sequentially heated and molded. The production time for the cover glass is very different depending on the heating conditions; thus, the prediction of the production time for different heating conditions should be needed. Therefore, in this study, the computations were performed with different heating conditions (uniform and non-uniform) in the present cover glass-molding machine. For uniform and non-uniform heating conditions, the simple correlation between the heating time and the heater capacity and the heating time to achieve higher durability can be suggested, respectively.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.223-231
• /
• 1992

CaO and ZnO were added to Al2O3-SiO2 binary system respectively as flux, then ZrO2 and TiO2 were applied as nucleating agent to these CaO-Al2O3-SiO2 and ZnO-Al2O3-SiO2 ternary system glass. The transparency could not be kept in CaO-Al2O3-SiO2 system glass, whereas the transparent glass-ceramics were prepared in ZnO-Al2O3-SiO2 system glass containing ZrO2 as the nucleating agent. At this time the optimum heating temperatures for the nucleation and the crystal growth were 78$0^{\circ}C$ and 97$0^{\circ}C$. The sizes of the precipitated crystals in the transparent glass-ceramics were below 0.1 ${\mu}{\textrm}{m}$, and their light transmissibilities were more than 80%.

• 대한전기학회논문지
• /
• 제36권10호
• /
• pp.741-747
• /
• 1987

The high-power Nd:glass system with five-stage amplifier was designed and its amplification characteristics was studied for developing high-power Nd:glass laser system as an energy driver of inertial confinement fusion(ICF). In order to study the amplification characteristics of remporal and spacial Gaussian laser beam, the dependence of them on pumping efficiency and rod loss were studied and discussed. The output energy of this system using phosphate Nd glass rod(LHG-7,LHG-8) and silicate Nd glass rod(LSG-91H), respectively, was calculated by the computer simulation using Avizonis-Grotbeck and Frantz Nodvik equations. As results of this simulation, it was found that the shorter the risetime of laser pulse, the larger the amplification factor and that the larger peak value of laser pulse, the lower the amplification factor. The output inergies of 179J, 344J, and 7J were obtained by the designed five-stage amplified high-power Nd:glass laser system using glass rods of LHG-7,LHG-8, and LSG-91H, respectively. From the results it was found that the laser system using the LHG-8 glass rod was the most excellent one among the systems and the cross section for stimulated emission of the gain coefficient was essentially important parameter for the amplification characteristics.

• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.57-62
• /
• 2013

We investigated the thermal and electrical properties of the $B_2O_3-ZnO-Bi_2O_3$ glass system as a sealing material in sheath heater modules. A composition with over 90 wt% $Bi_2O_3$ in the $B_2O_3-ZnO-Bi_2O_3$ system was glassified by controlling the cooling rate. The glass transition temperature and thermal expansion coefficient in bismate glass could be controlled by the minor ingredients of ZnO, $SiO_2$, $BaO_2$, and $K_2O$. The $B_2O_3-ZnO-Bi_2O_3$ glass system bonded well to metal, and bismate glass insulating properties were comparable to those of bismate glass $B_2O_3-ZnO-PbO$ glass system in a sheath heater module.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.858-864
• /
• 1995

A porous glass-ceramics body was prepared in the phosphate system. The glass composition of 47.2CaO-22.2TiO2-30.6P2O5 (mol%) containing a few weight percent of ZrO2 was suitable for a mother glass of a porous glass-ceramics. The dense glass-ceramics body was made by a two-step heat treatment of the mother glass. The crystalline phases of the glass-ceramics were $\beta$-Ca3(PO4)2 and CaTi4(PO4)6. The $\beta$-Ca3(PO4)2 phase could be selectively leached out with HCl solution and thus a crystalline $\beta$-Ca3(PO4)2 skeleton was remained. The dimension and shape of the porous glass-ceramics were nearly the same as the those of the first formed glass. The specific surface area and average proe radius of the porous glass-ceramics were 19$m^2$/g and 22 nm, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.267-270
• /
• 1996

This paper reports about the successful suspension of a glass plate by electrostatic forces. In order to implement a stable suspension, the electrostatic forces exerted on the glass plate are actively controlled on the basis of the gap lengths between the glass plate and the stator electrodes. In this paper, the dynamic model of the suspension system and the influence of the resistivity of glass on the system stability are described, followed by stator electrode design, the experimental apparatus and a stabilizing controller. Experimental results show that the glass plate can be suspended at a gap length of about 0.3 mm. The influence of air humidity on the suspension initiation time, and the lateral dynamic characteristic are also described.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.51-55
• /
• 2021

With the recent development of various smartphone designs in the smartphone market, the use of curved cover glass has been required, and interest in curved glass production has increased. In this paper, we designed a pressurization system that simplified the size of the system using a wedge amplification mechanism for smartphone curved glass molding systems. The pressurization system consisted of a linear motor, a wedge, and a force sensor. The wedge was used to amplify the force, and the piezoelectric sensor was used to measure the force. In addition, the proposed amplification mechanism was confirmed to have an error of 1.27% through an experiment compared to the simulation, and the pressurization error of 0.76% for the pressurization profile 3,500N was verified through an experiment.