• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.6
• /
• pp.581-591
• /
• 2016

Several attempts to construct multi-purpose tunnel for both road and waterway have been made. The multi-purpose tunnel is mainly used as a road tunnel, however it is transferred to waterway to control flood during rainy season. The planning of the multi-purpose tunnel is recognized as cost-effective way of infrastructure construction. In case of the multi-purpose tunnel constructed beneath groundwater table, seasonal fluctuation of groundwater table and repeated flow in the tunnel may cause long-term deterioration of the tunnel system. In this study, the behavior of multi-purpose tunnel in view of groundwater table or flow in the tunnel is investigated using model test and numerical modeling method. The results have shown that rising of groundwater table caused buoyant force to the tunnel and the fluctuation of rainwater in the tunnel generated loosening of surrounding ground. It is recommended to evaluate the effect of the long-term water pressure variation in the design of a multi-purpose tunnel.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.73-80
• /
• 2018

Purpose - The purpose of this study is to clarify the difference of store attributes of Korean consumers and to analyze it's influence on consumer satisfaction in duty free stores which gain ground inch by inch in the distribution chanel. And it is to find discriminative result as compared with foreign consumer. Research design, data, and methodology - Subjects for the quantitative study, quota sampling was adopted in the Lotte, Shilla downtown and airport duty free stores from the first to 15^th December 2016 and 177 questionnaires from Koreans who had purchasing experience in off line duty free store were analyzed. The data was analyzed by using factor and reliability analysis, descriptive statistics analysis, the independent sample t-test and multiple regression analysis. To test consistency, Cronbach's alpha was used. Results - The result were as follows; 1. Korean consumers consider the importance of store attributes in duty free stores in order Product, Economic Feasibility, Convenience, Promotion, and Accessibility. 2. The meaningful impactive factors of duty free store attributes on consumer satisfaction turned out Product and Promotion. 3. These results show meaningful distinction between Koreans and foreigners in terms of consumer satisfaction in duty free stores. Conclusions - A marketer who is working for duty free store consider now that price benefit can not give strong impact to Korean consumers more and should concentrate on various brand assortment even including private brand. In terms of promotion, most duty free shops put special stress on foreign consumer's wants now as highly increasing of Chinese travelers but Korean consumer's sales portion and number of visitor also are steadily increasing. Therefore, a duty free marketer should prepare the Korean-oriented services with more enhanced promotion strategies for individual and group travellers, for example, a mileage service, VIP room and social network system to satisfy Korean consumers. In order to get satisfaction from Korean consumers, it makes effort on product and promotion than accessibility, price and convenience. Due to high level influence, further study is needed to enlarge to on-line market and to develop private brands for duty free stores.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.613-620
• /
• 2016

This paper presents a MOHA(Many-Task Computing on Hadoop) framework which aims to effectively apply the Many-Task Computing(MTC) technologies originally developed for high-performance processing of many tasks, to the existing Big Data processing platform Hadoop. We present basic concepts, motivation, preliminary results of PoC based on distributed message queue, and future research directions of MOHA. MTC applications may have relatively low I/O requirements per task. However, a very large number of tasks should be efficiently processed with potentially heavy inter-communications based on files. Therefore, MTC applications can show another pattern of data-intensive workloads compared to existing Hadoop applications, typically based on relatively large data block sizes. Through an effective convergence of MTC and Big Data technologies, we can introduce a new MOHA framework which can support the large-scale scientific applications along with the Hadoop ecosystem, which is evolving into a multi-application platform.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.201-222
• /
• 2013

The purpose of the present study is to analyze how and to what degree multinational companies organize and operate their supply chains in accordance with the strategic resource of knowledge in their multinational management, and what kind of influence knowledge oriented global supply chain management has on the management performance of multinational corporations. For this purpose, the current research proposed a measurement model to provide specific shape to the concept of knowledge oriented global supply chain management by adopting the knowledge creation process proposed by Nonaka (1994), and conducted an empirical analysis of what kind of impact the knowledge management system and the knowledge creation process of companies have on the performance of their global supply chain management. The result of the empirical analysis of 113 multinational companies verified the validity and reliability of the measurement model proposed in this study. In addition, the comparative study of the sampled companies by grouping them according to the level of knowledge orientation in global supply chain management indicated that the enterprises that effectively manage the knowledge created within the global supply chain presented overall superiority on the performance of global supply chain management.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.110-116
• /
• 2020

As the management plan for domestic spent nuclear fuel is delayed, the storage of the operating nuclear power plant is approaching saturation, and the Kori 1 Unit that has reached its end of operation life is preparing for the dismantling plan. The first stage of dismantling is the transfer of spent nuclear fuel stored in storage at plants. The spent fuel management process leads to temporary storage, interim storage, reprocessing and permanent disposal. In this paper, the technical issues to be considered when transporting spent fuel in this process are summarized. The spent fuels are treated as high-level radioactive waste and strictly managed according to international regulations. A series of integrity tests are performed to demonstrate that spent fuel can be safely stored for decades in a dry environment before being transferred to an intermediate storage facility. The safety of spent fuel transport container must be demonstrated under normal transport conditions and virtual accident conditions. IAEA international standards are commonly applied to the design of transport containers, licensing regulations and transport regulations worldwide. In addition, each country operates a physical protection system to reduce and respond to the threat of radioactive terrorism.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1376-1384
• /
• 2008

Numerous researches on network self-configuration have been conducted on Wireless Sensor Network (WSN) and Ad Hoc network but the results have not been applied yet for factory automation. This paper presents development of intelligent process management systems conducting process monitoring and control irrelevant to physical position of a plant operator. The systems are indispensable for diagnosis of rotating machines which cannot exploit wired network. The system was implemented in a Personal Digital Assistant (PDA) using Bluetooth communication protocol. When a mobile terminal reaches to communication range of the process management server, the server detects the mobile terminal to reconfigure plant network automatically. The server authenticates a user of the terminal to download and installs monitoring and control program considering authorized level of the user. If the terminal leaves communication range of the server, it deletes the node from the network and removes the program automatically to save resources and prevent security problems such as missing terminal. Operation of developed functions was verified in a testbed emulating steel-making plant.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.2
• /
• pp.163-173
• /
• 2001

In this paper, space radiation environment and single event effect(SEE) have been analyzed for the KOMPSAT-2 operational orbit. As spacecraft external and internal space environment, trapped proton, SEP(solar energetic particle) and GCR(galactic cosmic ray) high energy Protons and heavy ions spectrums are analyzed. Finally, SEU and SEL rate prediction has been performed for the Intel 80386 microprocessor CPU that is planned to be used in the KOMPSAT-2. As the estimation results, under nominal operational condition, it is predicted that trapped proton and high energetic proton induced SBU effect will not occur. But, it is predicted that heavy ion induced SEU can occur several times during KOMPSAT-2 3-year mission operation. KOMPSAT-2 has been implementing system level design to mitigate SEU occurrence using processor CPU error detection function of the on-board flight software.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.9
• /
• pp.433-440
• /
• 2002

The addition of switches to a distribution feeder does, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder. To cover its service area so that feeder-level delivery reaches sufficiently close to all customers, feeders typically split their routes many times, in what is often called a lateral feeder. It is interesting to note, however, that the effectiveness of a switch is very much dependent on the types of lateral feeder. The types of lateral are classified into two types. The first is loop lateral feeder that can connect its load to an adjacent feeder through a tie line in case that a fault occurs in its feeder and it is laid out so that every feeder has complete fault backup through re-switching of its loads to other sources like a main feeder The second is the radial lateral feeder cannot connect its load to an adjacent line, no provision is made for contingency backup of feeders. There are no other circuits in the radial lateral feeder form which to restore power. In this study, we evaluate the effectiveness of a switch installation between on the radial and loop lateral feeders to increase reliability by decreasing the duration of the outage. These results can help power utility to design the switch layouts on the radial and loop lateral feeder system.