• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.886-900
• /
• 2015

Small cells are deployed in Heterogeneous Networks (HetNet) to improve overall performance. These access points can provide high-rate mobile services at hotspots to users. In a Small Cell Network (SCN), the good deployment of small cells can guarantee the performance of users on the basis of average and cell edge spectrum efficiency. In this paper, the performance of small cell deployment is analyzed by using system-level simulations. The positions of small cells can be adjusted according to the deployment radius and angle. Moreover, different Inter-Cell Interference Coordination (ICIC) techniques are also studied, which can be implemented either in time domain or in frequency domain. The network performances are evaluated under different ICIC techniques when the locations of Small evolved Nodes (SeNBs) vary. Simulation results show that the average throughput and cell edge throughput can be greatly improved when small cells are properly deployed with the certain deployment radius and angle. Meanwhile, how to optimally configure the parameters to achieve the potential of the deployment is discussed when applying different ICIC techniques.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2015

Satellite signal is excellent broadband, can provide the same information in a wide range, but there is a disadvantage that much less of the security level of the data. Therefore, supplementation of safety is a serious problem than anything in the satellite communication. In this paper, it was simulated by applying ARIA in encryption technique and by applying transport mode, tunnel mode in security header AH and ESP in order to examine the effect of IPsec VPN. In addition, we had compare with general services that do not apply encryption in order to analyze the impact of the encryption algorithm. Channel, by applying the Markov channel and adding AWGN, is constituted a satellite communication environment. In case of retransmission based error control scheme, we applied Type-II HARQ scheme and Type-III HARQ scheme which are performance is a good way in recently, and it is constituted by a turbo code and BPSK modulation scheme. we were analyzed performance in BER and Throughput in order to compare the simulation more effectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.159-164
• /
• 2016

This paper proposes an improved superframe structure with one : N situation of the network as a target for efficiency battery and communication performance used in the existing standard IEEE 702.15.4 MAC layer. The proposed superframe transforms and adds a two structures. First, we add the proposed scheduling interval after the arrival of the beacon. Second, we change to a structure in which one of the contention access period is divided into two. The contention access period and the contention-free access period of active portion are divided according to the LQI value of the device. Through this system-level simulation written by $c{^+^+}$, as a results show that the battery consumption and transmission performance has been increased.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.367-388
• /
• 2016

Eccentrically braced frames (EBFs) represent an attractive lateral load resisting steel system to be used in areas of high seismicity. In order to assess the likely damage for a given intensity of ground shaking, fragility functions can be used to identify the probability of exceeding a certain damage limit-state, given a certain response of a structure. This paper focuses on developing a set of fragility functions for EBF structures, considering that damage can be directly linked to the interstorey drift demand at each storey. This is done by performing a Monte Carlo Simulation of an analytical expression for the drift capacity of an EBF, where each term of the expression relies on either experimental testing results or mechanics-based reasoning. The analysis provides a set of fragility functions that can be used for three damage limit-states: concrete slab repair, damage requiring heat straightening of the link and damage requiring link replacement. Depending on the level of detail known about the EBF structure, in terms of its link section size, link length and storey number within a structure, the resulting fragility function can be refined and its associated dispersion reduced. This is done by using an analytical expression to estimate the median value of interstorey drift, which can be used in conjunction with an informed assumption of dispersion, or alternatively by using a MATLAB based tool that calculates the median and dispersion for each damage limit-state for a given set of user specified inputs about the EBF. However, a set of general fragility functions is also provided to enable quick assessment of the seismic performance of EBF structures at a regional scale.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.569-579
• /
• 2004

Recently, the extreme drought is often occurred due to the global warming and the serious weather changes. Also, the problems of the water pollution In the developed areas, the oppositions from people in the upper stream area and water concession from the local governments affect the national request to get more clean water resources in upper stream of the undeveloped areas. It also brings on the necessity of recognition for water supply managements. Therefore, as the water demand is rapidly changes in the metropolitan areas, the capability of water supply from the north Han river basin dams should be appropriately investigated. In this study, we developed a simulation system using STELLA (equation omitted) software environment, a shared vision model, to analyze the possibility of the stable water supply from north Han river basin dams. Also, three different rules are applied on this model by dividing the water level to minimum(Rule 1), medium(Rule 2) and maximum(Rule 3). Using the rules, the safety yield changes are analyzed for dam rule curve of the reservoir and hydropower release.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.615-626
• /
• 2003

The applied model for this study area is WINFLOW using mite element method, It is thought that the simulation result by WINFLOW model under the steady flow state reflects well the ground water distribution within the reliability level which shows the error range of 1.1% to 8.0% from the comparison between the computed values and the observed, and analyzed that the constant head distribution is shown along the east-west direction and gentle and stable head gradient along the north-south direction. Ground water of the study area shows stable movement from the south to the stream area, and the particle trace for each location shows relatively linear shape from the upstream to the pumping location while the radius of influence according to the pumping amount shows a significant difference at the down stream area from the pumping location. The simultaneous pumping from P and P1 shows more complicated appearance, not the increase of the radius of influence than pumping from a single well P or P1, and it is analyzed that the particle path takes nearly linear form. It is known that the flow direction of the ground water and the velocity of the flow affect on the magnitude of the radius of influence of the wells from the fact that the more decreasing pattern of the ground water head is observed at the side of the well and the down stream area than the upstream area when the ground water moves from south to north regarding the radius of influence according to the pumping amount. Satisfactory results in analyses of ground water movement are obtained through the significant reduction of the physical uncertainties in the flow system as well as the relatively convenient model application using WINFLOW model which is proposed in this study.

• Korea-Australia Rheology Journal
• /
• v.19 no.4
• /
• pp.191-199
• /
• 2007

Precision injection molding process is of great importance since precision optical products such as CD, DVD and various lens are manufactured by those process. In such products, birefringence affects the optical performance while residual stress that determines the geometric precision level. Therefore, it is needed to study residual stress and birefringence that affect deformation and optical quality, respectively in precision optical product. In the present study, we tried to predict residual stress, final shrinkage and birefringence in injection molded parts in a systematic way, and compared numerical results with the corresponding experimental data. Residual stress and birefringence can be divided into two parts, namely flow induced and thermally induced portions. Flow induced birefringence is dominant during the flow, whereas thermally induced stress is much higher than flow induced one when amorphous polymer undergoes rapid cooling across the glass transition region. A numerical system that is able to predict birefringence, residual stress and final shrinkage in injection molding process has been developed using hybrid finite element-difference method for a general three dimensional thin part geometry. The present modeling attempts to integrate the analysis of the entire process consistently by assuming polymeric materials as nonlinear viscoelastic fluids above a no-flow temperature and as linear viscoelastic solids below the no-flow temperature, while calculating residual stress, shrinkage and birefringence accordingly. Thus, for flow induced ones, the Leonov model and stress-optical law are adopted, while the linear viscoelastic model, photoviscoelastic model and free volume theory taking into account the density relaxation phenomena are employed to predict thermally induced ones. Special cares are taken of the modeling of the lateral boundary condition which can consider product geometry, histories of pressure and residual stress. Deformations at and after ejection have been considered using thin shell viscoelastic finite element method. There were good correspondences between numerical results and experimental data if final shrinkage, residual stress and birefringence were compared.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1009-1022
• /
• 2012

This study approach the conflict in the process of promoting Dam construction plan from a hydrological method and comprehend the cause of conflict on conservation and flood collect all interested parties direct involvement and develop Shared Vision Model (SVM) to plan simulation and result. We forecast water for living, industrial water and agricultural water in each administrative district on conservation and simulate promptly in case that each structural alternative is formed and suggest water level deduction effect and change of area on watted surface and damage and organize the system to draw and agreement through exchanging mutual opinion. Also, it considered to contribute meditation and soften of conflict by securing accuracy of releasing information and trust of the result.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.2
• /
• pp.27-34
• /
• 2011

This study analyzes the determination of slope failure model due to changes in ground condition followed by heavy rainfall. With a simulated rainfall system, the movement of a slope from the rainfall penetrating the unsaturated soil is investigated with respect to various conditions of pore-water pressure, earth pressure, and moisture content, considering rainfall duration and permeability. As a result of the experiment, under the persistent precipitation of 50mm/h, pore-water pressure of weathered granite soil started increasing from the upper position of the slope, and then the pressure increased in middle and bottom portion of it in timely manner. In case of the pore-water pressure of the standard soil, the pressure increased from the middle and bottom portion, and the cause of the different order is suspected to be the difference in permeability between the standard soil and the weathered granite soil. As an outcome, though the result may vary by each foundation, there exists a danger of slope failure not only when the cumulative rainfall is more than 120 mm but also when the saturation level amounts to 60~75%.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.82-88
• /
• 2002

In this paper, we proposed a audio indexing method that is used wavelet transform for audio data retrieval. It is difficult for audio data to make a efficient audio data index because of its own particular properties, such as requirement of large storage, real time to transfer and wide bandwidth. An audio data in del using wavelet transform make it possible to index and retrieval by using the particular wavelet transform properties. Our proposed indexing method doesn't separate data to several blocks. Therefore we use both high-pass and low-pass parts of last level coefficient of wavelet transform. Audio data indexing is made by applying the string matching algorithm to high-pass part and zero-crossing histogram to low-pass part. These are transformed to the continued strings, Through this method, we described a retrieval efficiency. The retrieval method is done by comparing the database index string to the query string and then data of minimum values is chosen to the result. Our simulation decided proper comparative coefficient and made known changing of retrieval efficiency versus audio data length. The results show that the proposed method improves retrieval efficiency compared to conventional method.